835 reviews analysed
1. Johnson Controls A19AAT-2C Freezer Temperature Controller (D132)
Description
Use this handy controller to regulate the temperature in your freezer between 20 – 80F . Great for turning a chest freezer into a keg refrigerator. Strictly a mechanical thermostat for cooling only, it is simple to use and economical. It operates with a gas filled probe on a 6-foot capillary tube. When the gas contracts or expands in the probe, it triggers a mechanical device inside the control which turns the power on or off. There is no probe temperature readout on the dial, so keeping a thermometer inside the refrigerator is highly recommended to keep track of the actual temperature. On most refrigerators, the controller will allow a usable range of 37 to 80 F, while on freezers, the controller will be able to reach its full 20 to 80 F range. Features: Made of stainless steel. Adjustable with the turn of a knob. No drilling necessary. Plug unit into wall and then run the sensor into your freezer. Male and female plug in one. Specs: Temperature dimensions: 4 3/8″ H x 2 1/8″ W x 1 1/2″ D. Cord dimensions: 6′. Remote sensor bulb: 5 1/2″W. Remote sensor bulb capillary tube: 6′. Temperature range: 20 – 80F. Voltage: 120 VAC.
2. Inkbird ITC-306T Pre-Wired Electronic Heating Thermostat Temperature Controller and Digital Timer Controller for Aquarium, Seed Germination, Reptiles, Hatching ect, Without Cooling Controlling
Feature
- [Convenient Design] Plug and play, easy to use. Support reading with Centigrade or Fahrenheit.
- [Dual Display Window] Be able to display measured temperature and set temperature at the same time.
- [Dual Time Cycle Setting] Can be set different temperature from day and night on the basis of the physical needs of animals and plants during 24 hours.
- [Only Heating] Temperature Control Mode: On/Off Control. Please note it is only heating controller without cooling function. Both of the plugs can control the heating. But totally could not over 1200W.
- [Different Functions] Temperature calibration, over-temperature and sensor fault alarm. Maximum output load: 1200W (110V).
Description
Inkbird day and night temperature controller is a pre-wired heating output temperature controller (No Cooling Control) with time function specifically for breeding and planting.
It can be set to two different temperatures with its function of dual time cycle setting during 24 hours according to the day and night, which can more suitable for the physiological needs of animals and plants.
It can be widely use in over-heat protection and automatic temperature control system of all sorts of electrical equipment for aquarium, pets breeding, hatching, fungus fermenting, and seed germination accelerating, etc.
With large power output 1,200W, it’s suitable for most applications. And the temperature can be controlled more accurately with its function of temperature calibration and temperature hysteresis.
Specification:
Temperature Control Range: -50~99 °C / -58~210 °F
Temperature Resolution: 0.1 °C / 0.1°F
Temperature Accuracy:±1°C (-50~70°C) / ±1°F (-58~160°F)
Input Power : 100~240VAC, 50Hz/60Hz
Temperature Control Output: Max. 10A, 100V ~240V AC
Ambient Temperature: -30~ 75 °C / -22~ 167 °F
Storage Temperature: -20~ 60 °C / -4~ 140 °F
Humidity: 20~85% (No Condensate)
Sensor Type: NTC sensor (Including)
Sensor Length: 2m / 6.56ft
Relay Contact Capacity: Heating (10A, 100-240VAC)
Input Power Cable Length: 1.5m (5ft)
Output Power Cable Length: 25cm (1ft)
Body Dimension: 140x68x33mm (5.5×2.7×1.3 inch.)
Socket Dimension: 85x42x24mm (3.3×1.7×1 inch.)
Warranty: 1 Year
Package Included:
1 x Temperature and Time Controller
1 x Manual
3. Poniie TC-15A Digital Temperature Controller 2-Stage Outlet Thermostat Heating & Cooling Mode for Greenhouse, Terrarium, Brewing and Fermentation (110V 15A)
Feature
- CONVENIENT DESIGN: Pre-wired plug and play design, easy to program, high accuracy waterproof sensor, support °C/°F display
- DUAL RELAY OUTPUT: Be able to connect with heating and cooling loads at the same time with control range (-40~210℉)
- DUAL DISPLAY WINDOW: Be able to display measured temperature and set centering temperature at the same time
- CALIBRATION & PROTECTION: Be able to calibrate temperature and set delay to protect your refrigerator from cycling too fast
- BUY WITH CONFIDENCE: 1-YEAR Warranty
- MAX. 1650W (110V)
- Over temperature & faulty sensor alarm, with power off memory
4. Inkbird WiFi Temperature Controller ITC308 Reptile Freezer Thermostat Digital Heating and Cooling Heater Cooler Greenhouse Plug Outlet 2 Stage 1100W 110V
Feature
- [WIFI & APP] WIFI smart controller supports both IOS & Android,WIFI supports 2.4GHz Wi-Fi router, free APP “InkbirdSmart” which is able to monitor temperature at any time.
- [Dual Relay Output] Dual relay output, which can connect heating and cooling device at the same time.
- [Alarm for Safe] High/Low temperature limit setting alarm.
- [Convenient Design] Plug-n-play, easy to use. Support ℃/℉reading and Temperature calibration.
- [Maximum Output Load] 1100W(110V).
5. Inkbird ITC-308S Aquarium Heating and Cooling Dual Stage Temperature Controller Freshwater Saltwater Aquarium Tropical Fish Ornamental Shrimp
Feature
- ????????【Heating and Cooling】Controls both a heating and cooling/refrigeration device at the same time. This controller can also be used to easily control a single heating or cooling device.
- ????????【Applicable Scene】Because it has the powerful function of corrosion protection, it is very suitable for fresh water, sea water aquarium, coral cylinder, ornamental shrimp and tropical fish.
- ????????【Dual Display Window】Easy to set up,be able to display measured temperature and set temperature at the same time.Provides a temperature display of Celsius or Fahrenheit.
- ????????【Alarm for Safe】High and low temperature alarms,sensor failure alarm. Maximum output load: 1200W(110V).
- ????????【Term of service】Purchase products and get a one-year warranty.
6. Inkbird Pre-Wired Dual Stage Digital Temperature Controller Outlet Thermostat 110V, 1100W Heating and Cooling Multi-purpose Controllers for Aquaria, Reptile Keeping, and Brewing Fermentation Kegerator
Feature
- Simple to use: plug it in, set the temp ranges, place the probe, plug in the heater/cooler into the marked outlet.
- Be able to connect with refrigeration and heating equipment at the same time.
- Easily calibrated.
- Can display in Centigrade or Fahrenheit.
- Whether you need temperature control for fermentation, greenhouse, kombucha control or to set up your temperature project system, the ITC-308 temperature controller is a great choice.
Description
Features:
Temperature Control Range : -50~99 °C / -58~210 ° F
Temperature Resolution: 0.1 ° C / 0.1° F Temperature
Accuracy: ±1°C (-50 ~ 70°C) / ±1°F (-50 ~ 160° F)
Temperature Control Mode :On/Off Control, Heating and Cooling
Input Power: 100 ~240VAC, 50Hz/60Hz
Temperature Control Output: Max. 10A, 100V ~240V AC
Dimension Body: 140x68x33mm (5.5×2.7×1.3inch)
Socket: 85x42x24mm(3.3×1.7x1inch)
Sensor Length: 2m / 6.56ft
Input Power Cable Length: 1.5m (5ft)
Output Power Cable Length: 30cm (1ft)
Buzzer Alarm: High and Low Temperature Alarm
Temperature calibration
Over-temperature and sensor fault alarm
Heating/Cooling differential function could be set separately for refrigeration and heating to protect temperature controller from violent change.
Sensor Type: NTC sensor (Including)
Ambient Temperature: -30~ 75 ° C / -22~ 167 ° F
Storage Temperature: -20~ 60 ° C / -4~ 140 ° F
Humidity 20~85% (No Condensate)
Warranty: 1 Year
It has certificate of EMC, LVD, RoHS, FCC compliance.
Package Content:
1x Temperature controller ITC308
1x Manual
7. Peco TF115-001 NEMA 4X Line Voltage Thermostat, Gray
Description
Designed specifically for use in National Electrical Code (N.E.C.) Article 547 applications requiring a rugged, weather resistant, durable control for both heating and cooling (ventilation) in agricultural, industrial and commercial environments. The T115 is suitable for use in animal confinement environments as well as factories, warehouses, garages and gymnasiums. The unit will tolerate spraying with water, high humidity, airborne contaminates and moderately corrosive conditions.
8. Inkbird C206T 1500W Heat Mat Temperature Controller Day and Night Thermostat 6.56 Feet NTC Sensor F and C Degree -58 to 212F
Feature
- ????????【Setting Independently】Inkbird C206T lets you to control your desired environment temperature. You can set the day and night temperature independently to connect your heat equipment, then set the temperature that you want to maintain.
- ????????【Accuracy Temperature]】The heat thermostat is with 6.56ft precise temperature sensor and its adjustable set points temperature control from -58 to 212°F with an accuracy of ±1°F.
- ????????【Three Display Window]】Be able to display 3 different details such as the current temperature, the setting temperature and the current time.
- ????????【Waterproof Probe】 The NTC stainless probe is waterproof, IP68 Grade. Its diameter is 1.57”x 0.2”.
- ????????【Power parameter 】Please be sure to use within 13.5A 110V 1500W
9. Inkbird Digital Temperature Controller Thermostat & Timer Time Switch AC 100~240V,1200W Only Heating for Breeding, Planting ect. NO COOLING CONTROL
Feature
- NO COOLING CONTROL.There is only heating relay. It can be widely use in over-heat protection and automatic temperature control system of all sorts of electrical equipment for aquarium, pets breeding, hatching, fungus fermenting, and seed germination accelerating, etc. Only one relay and it extends two plugs which both are heating plugs, NO cooling plug.
- It can be set to two different temperatures with its function of dual time cycle setting during 24 hours according to the day and night, which can more suitable for the physiological needs of animals and plants.
- This plug and play product is designed with dual LCD display, and offers the optional display of Centigrade or Fahrenheit, which makes it more humanized temperature control. With large power output 1,200W, it’s suitable for most applications.
- The temperature can be controlled more accurately with its function of temperature calibration and temperature hysteresis.
- There is only heating relay. It can be widely use in over-heat protection and automatic temperature control system of all sorts of electrical equipment for aquarium, pets breeding, hatching, fungus fermenting, and seed germination accelerating, etc.
10. Inkbird Heating Cooling Stage Thermostat Temperature Controls, NTC Sensor for Home brewing Fermenation, Carboy, Freezer, kegerator (ITC308S + Long&Short Sensor)
Description
Description:
1. It has two outlets, one labeled cooling and one labeled heating. Plug your cooling device into the cooling outlet and your heating device into the heating outlet. You can also leave either unplugged if you’re only interested in heating or cooling.
2. Input Power: 100 ~240VAC, 50Hz/60Hz,, Output Power: 100 ~240VAC, 50Hz/60Hz,, Max Current: 10A, Temperature Setting Range: -50 to 99 deg C/-58 to 210 deg F., Max Wattage: 1100W(110V)/2200W(220V).
Package included:
1 pc temperature controller 308S
1 pc DC cord sensor, (12″ probe)
1 pc DC cord sensor, (1.97″ probe)
Conclusion
By our suggestions above, we hope that you can found Wr09x10022 Ge Monogram Temp Control for you.Please don’t forget to share your experience by comment in this post. Thank you!