914 reviews analysed
1. ReisongA10 EL34 Hi-Fi Audio Stereo Tube Amplifier Single-end Class – A Amp
Feature
- With an English Operation Manual,If you need a circuit diagram, please contact us by email, thank you!
- Manual welding, preferred audiophiles, the output transformer switch to the higher end of the 76 * 40 output transformer.
- When low-frequency dynamic playback is good, control and strong, it is more powerful.
- Tube: EL34 × 2,6N2J × 2,5Z4PJ × 1
- Warm reminder: You should take about 30-100h time to operate the amp.RUN-IN to the amp gives it’s best and stable sound.So during the first 100h use time the sound maybe is not the best,you can also use your own run-in method.
2. Little Dot MK2 MKII 6J1 X 2 6N6 X 2 Tube Standard Hybrid Headphone Headphone Amp Pre-Amp Tube Amplifier (MKII)
Feature
- Little Dot MKII greatly increases sound quality, dynamic range, output impedance, and harmonic distortion
- Little Dot MKII also gains the driver tube-rolling options from the rest of the MK-series with the ability to roll 6JI, WE403A/B, GE5654, M8100, CV4010, EF95, etc at its factory jumper setting, and with jumper pins shorted, EF92, CV131, and all equivalents and drop-in replacements
3. MUZISHARE X7 KT88 x4 Push-Pull Vacuum Tube Integrated Amp Power Amplifier MM Phono amp Remote Upgrade
Feature
- MUZISHARE X7 Upgraded version. Upgraded the internal coupling capacitor, is the designer to debug the custom-made silver film capacitor, relative to the classic version of the extension, control, density is better.
- MUZISHARE X7 is an integrated Amplifier. This is also a Power Amplifier (there is a group pre-amp input), a Headphone amplifier and this is a amplifier for Phono player too, direct link your phono player to this amplifier to output to speakers.
- Pure Handmade,point to point hand welding using two high-quality wide-frequency high-quality Japanese EI output transformer using a high-power Z11 core toroidal power transformer dedicated designed for the machine , voltage amplification and promote are used tube 5AR4 for rectifier power supply.
- Use 12AX7 and 12AU7 vacuum tube for voltage amplification and phase inversion,use KT88 vacuum tube to do AB1 push-pull power amplification
- Mute delay function when turn on the amp(about 30 seconds) ;the choice of Japanese ALPS motor potentiometer
- Provide Triode and Ultralinear selection function: Triode work mode. soft. pure and sleek. suitable for enjoying vocals. strings Music and other types of music
- Ultralinear work. the sound of open. unrestrained. the momentum is good. for large scenes. large dynamic type of music. Peripheral power tube current adjustment knob and current display meter. With pure power amplifier features. can be linked the pre-amp signal input. with the phono function. can be connected to the Phono player
4. Yamaha A-S701SL Natural Sound Integrated Stereo Amplifier (Silver)
Description
Pure sound quality and outstanding drive power. An integrated amplifier with the advantage of analog and digital inputs.
5. Dared VP-99P HiFi Vacuum Tube Integrated Amplifier Hi-end Integrated Power 50Wx2,KT88,12AX7
Feature
- Top level quality parts, classic appearance: chrome plated handles,gold plated connectors, gold tube sockets,NICHICON/ELAN capacitors from Japan, ALPS potentiometer, IEC Power supply socket,230V/115V switch.
- With tubes KT88, this unit can deliver balanced and colorful tone , a perfect choice to play vocal , symphony and classic music.
- The best channel isolation is provided by four over-sized transformers with independent DC filtering circuits.
- Another feature is that it comes with a subwoofer output, for those who want to connect an active sub to the system.
- This integrated amplifier is compatible with most speakers, perfectly for vocals, symphony, and classical music, definitely a good choice for audiophiles.
Description
This product is well designed and strongly built, is selling very well in Europe, USA and Japan for about 15 years, known for its classic appearance, wonderful workmanship and fantastic sound quality.
Specifications:
Model : VP-99P
Power output : 50W per channel
Input power:300W
Output Impedance: 4ohm,8ohm
Frequency Response: 20Hz~20KHz
Distortion: 0.1% (10W)
Signal/Noise Ratio:>= 86dB
Input:LINE1, LINE2,LINE3,AUX
Tubes : KT88 x 4, 12AX7 x 5
Input sensitivity : 210mV
Size : 49.5cm x 23cm x 22cm (W x D x H)
Weight : 25 Kg
What the package includes:
VP-99P Tube Amplifier *1
User Manual *1
Power cable *1
Signal cable *1
white gloves *1
Brush *1
Cleaning cloth *1
6. Nobsound 12AX7 12AU7 Vacuum Tube Preamp HiFi Preamplifier Shigeru WADA Japan Circuit (Assembled)
Feature
- Shigeru Wada Japan circuit improved circuit
- Vacuum Tube: Shuguang 12AX7 * 2 / 12AU7 * 2 / 6Z4 * 2
- Excellent scaffolding design, reasonable, regular, symmetrical device layout, strictly respect the grounding line
- Power Transformers 76 * 40 H250 0.35 sheets
- Japan ALPS 16 A-type audio potentiometer
- Full aluminum chassis with wood side panel
- 4 Set of stereo L/R RCA auido input, 1 set of RCA output
7. T20 Bluetooth Tube Amplifier Stereo Receiver 2 Channel Class D Digital Mini Hi-Fi Power Amp Preamp Compact Integrated Headphone Amplifier for Home Passive Speakers with 6J4 Vacuum tubes + Power Supply
Feature
- CSR64215 Bluetooth 4.2 core support aptX low latency, Streaming range up to 39ft(12m), With Bluetooth and AUX selector, no pop when Bluetooth connecting
- 50W RMS X 2(4 ohms, 20 Hz – 20 kHz, 0.04% THD), built-in speakers protection circuit, best for outdoor/ bookshelf/ computer/ desktop /ceiling /floor standing speakers, can use iPod, Phone, MP3 players, TV, Echo Dot, CD players, or Streaming Media players as input
- Adopt 2 x 6J4 tubes to get clear audio sound, tubes can be replaced by 6K4, 6J1, GE5654, 6AK5, 6ж1П, 6BC5, 403A/B, EF40, EF95 and so on, with headphone output for 16-64ohm headphones.
- Small simple compact design but practical and powerful, Hi-Fi Bluetooth amplifier receiver exclusively designed for the customers who pursue HiFi sound
- Power amp + Preamp + Headphone amp, perfectly suited for your desktop or a smaller space in your home or office, digital amplifier is easy to connect to your audio system with no software to install or settings to change
8. Nobsound NS-08E Vacuum Tube Headphone Amplifier Hi-Fi Valve Headphone Amp Stereo Audio Preamplifier
Feature
- NS-08E is a Hi-Fi tube headphone amp. It can offer >
- =1100mW at 32Ω and can drive 18~600 ohm headphones & headsets.
- New version adopts 6J3 vacuum & valve tube, which has warmer tube sound and more replaceable tubes.
- Upgrade circuit can ensure lower background noise, more powerful bass and more brilliant treble.
- It can also be used as a stereo preamplifier for other amplifiers and active speakers. For better preamp function, we recommend NS-10P (ASIN: B07719G56B).
- CNC Aluminum shell with super mini size. Very solid workmanship. Prompt and courteous customer service.18-month warranty and life technical support. For any questions, please contact us on Amazon.
9. SMSL T2 Vacuum Tube Headphone Amplifier, Mini Audio HiFi Stereo Integrated Amp
Feature
- Low Ground Noise
- There’s no buzzing or ringing when you use our amp! We feature a high-grade microprocessor that controls the relay while its being switched on and off, achieving a low-ground noise power circuit.
- Sophisticated Design
- Our amp is constructed from top of the line, scratch resistant CNC aluminum.(Warm tip:When you use this product for a long time,please do not touch it by your bare hand,it may very hot,but please don’t worry this is a normal phenomenon.)
- High Drive Current
- Our specially designed power output boasts a larger than average drive current.(Note:please know that this headphone amplifier not for intense music)
- Semi-Set Tube Design
- As a safety measure, the high temperature portion of the tube is strategically placed inside of the amp and out of reach.(Please plug the power supply after all the connection been done for safety)
- Small Compact Size & 2 X 6J9 J-Grade Tubes
- The dimensions of our amp are 2.9inX3.5inX1.02in, and you can replace the stock tubes with E180F, 6ж9П, EF861, and 6688 tubes if you wish to be able to cue music.
10. Matched Pair (2x) Genalex Gold Lion 12AX7 tube (ECC83)
Conclusion
By our suggestions above, we hope that you can found Mc275 2Channel Vacuum Tube Amplifier for you.Please don’t forget to share your experience by comment in this post. Thank you!