Top 10 Keurig Tankless

Keurig K150P has redefined brewing by combining state of the art brewer technology with unique K-cup packes. The K-cup system contains all of the essential elements required for brewing a single, fresh cup of perfect coffee, tea, hot cocoa and more. With a choice of over 250 varieties of hot and iced beverages from the world’s premier gourmet brands, Keurig brewed beverages are sure to keep everyone in your business or home pleased.

This tank allows you to hook up a direct water line connection. Simply remove your old tank and install this one. Instructions included. This product requires removal of two plastic plates on brewers for proper fitting and installation. Please feel free to call for help.

Get hot water where it’s needed, when it’s needed with the Bosch ES4 Tronic 3000 T Electric water heater. This 4-gallon capacity point-of-use mini-tank fits right under your sink and provides a practical and effective solution to your hot water needs. This smaller model can be plugged right into a 120-volt outlet with the 36-37″ cord, or can be installed in-line with a larger hot water source to provide “on-demand” use. The glass-lined tank offers great insulation and added durability, while the heater’s fast recovery rate eliminates long waits for hot water. An external dial allows you to easily control the temperature range, and the temperature-and-pressure relief valve enhances your safety. The ES4 Tronic 3000 T from Bosch has a sleek and attractive exterior design that blends in seamlessly with existing décor when installed in a visible location, making this heater a great option in any room. Water Heater measures 13.75″ H x 13.75″ L x 13.5″ D and weighs 17.3 lbs. Do not operate this water heater if it is has a damaged cord or plug, if it is not working properly, or if it has been damaged or dropped

Product Description

This Smart Technology electric tankless water heater is configured as a “whole home” model for climates where incoming water temperature is 62°F and above. The ECO 18 is capable of heating over 2.5 gallons per minute, which is the equivalent of one water saver shower head (with a 1.5 gpm flow) and one sink with a low inlet water temperature of 62°F, and an output setting of 105° F. Two showers emitting no more than 1.5 gpm each can be run simultaneously when incoming water temperature is above 70° F. Digital temperature control allows you to set your temperature in increments of 1°. All tankless water heaters are sized based on flow rate and temperature rise, and there is a direct relationship between the two. So if used in a cold area requiring a high temperature rise, it will be more limited in the amount of fixtures (gallons per minute) it can heat at one time compared to a warmer climate. However, when sized properly it will provide endless hot water and only consume the energy needed, giving the user complete control. Prior to purchase and installation please verify this model is the right size for the expected demand and electrical requirements. The ECO 18 requires a minimum 150 amp electrical panel for installation with (2) 40 amp double pole breakers connected to (2) sets of #8 awg wire. Plumbing connections are 3/4″ NPT. For additional assistance please feel free to contact our support center at 877-474-6473.

From the Manufacturer

This Smart Technology electric tankless water heater is configured for climates where incoming water temperature is 62 Degree F and above. The ECO 18 is capable of heating over 2.5-Gallon per minute, which is the equivalent of one shower head (with a 1.5 gpm flow) and one sink with a low inlet water temperature of 62 Degree F. Two showers can be run simultaneously when incoming water temperature is above 70 Degree F in warmer climates such as South Texas, South Florida, New Mexico, Arizona and South California. These models come with a digital temperature control that allows you to set your temperature in increments of 1 Degree. Prior to purchase and installation please verify this model is the rights size for your hot water needs and electrical requirements.

This tank allows you to hook up a direct water line connection. Simply remove your old tank and install this one. Instructions included.

Product Description

Rinnai’s V65E exterior-mount tankless water heater efficiently delivers up to 6.6-Gallon per minute (GPM) of hot water, making it perfect for your one to two and half bathroom home. This easy-to-install, ultra-compact unit lets you enjoy all the benefits of Rinnai tankless water heating. You’ll experience clean, reliable hot water at a consistent pre-set temperature, while saving energy and precious floor space in your home.

From the Manufacturer

Rinnai’s V65E exterior-mount tankless water heater efficiently delivers up to 6.6-Gallon per minute (GPM) of hot water, making it perfect for your one to two and half bathroom home. This easy-to-install, ultra-compact unit lets you enjoy all the benefits of Rinnai tankless water heating. You’ll experience clean, reliable hot water at a consistent pre-set temperature, while saving energy and precious floor space in your home.

Product Description

Features ENERGY STAR Qualified Energy Factor of .82 for Natural Gas and Propane Certified for Installation in Manufactured (Mobile) Homes Leak detection shuts off water to unit to limit property damage Enhanced scale detection lessens possibility of serious, long-term damage to unit Temperature lock prevents accidental or unauthorized changes to water temperature Complies with South Coast Air Quality Management District 14 ng/J or 20 ppm NOx emission levels Rinnai Value Series Tankless Water Heater Product Warranty Dimensions Width: 14 Inches Height: 23 Inches Depth: 9 Inches Weight 45.6 Pounds Ignition Direct Electronic Hot Water Capacity 0.26 to 6.6 GPM Minimum Activation Rate 0.4 GPM Minimum/Maximum Gas Rate (Input BTUs ) 10,300 150,000 Energy Factor 0.82 for Natural Gas and Propane Energy Star Yes Approved Gas Types Natural Gas or Propane Temperature Settings 98F – 140F with MC-91-2US 98F – 160F with MCC-91-2US Type of Controller MC-91-2US (included) MCC-91-2US (optional for Hydronic Applications) MC-100V-1US Deluxe Controller (optional) BC-100V-1US Bathroom Controller (optional) Ultra Lox NOx Yes Electrical AC 120 Volts, 60 Hz Electrical Consumption Normal: 76 Watts Standby: 2 Watts Anti-Frost Protection: 120 Watts Service Connections Gas Supply: 3/4 Inch MNPT Cold Water Inlet: 3/4 Inch MNPT Hot Water Outlet: 3/4 Inch MNPT. Turn off gas supply and 120 V power supply

From the Manufacturer

Features ENERGY STAR Qualified Energy Factor of .82 for Natural Gas and Propane Certified for Installation in Manufactured (Mobile) Homes Leak detection shuts off water to unit to limit property damage Enhanced scale detection lessens possibility of serious, long-term damage to unit Temperature lock prevents accidental or unauthorized changes to water temperature Complies with South Coast Air Quality Management District 14 ng/J or 20 ppm NOx emission levels Rinnai Value Series Tankless Water Heater Product Warranty Dimensions Width: 14 Inches Height: 23 Inches Depth: 9 Inches Weight 45.6 Pounds Ignition Direct Electronic Hot Water Capacity 0.26 to 6.6 GPM Minimum Activation Rate 0.4 GPM Minimum/Maximum Gas Rate (Input BTUs ) 10,300 150,000 Energy Factor 0.82 for Natural Gas and Propane Energy Star Yes Approved Gas Types Natural Gas or Propane Temperature Settings 98F – 140F with MC-91-2US 98F – 160F with MCC-91-2US Type of Controller MC-91-2US (included) MCC-91-2US (optional for Hydronic Applications) MC-100V-1US Deluxe Controller (optional) BC-100V-1US Bathroom Controller (optional) Ultra Lox NOx Yes Electrical AC 120 Volts, 60 Hz Electrical Consumption Normal: 76 Watts Standby: 2 Watts Anti-Frost Protection: 120 Watts Service Connections Gas Supply: 3/4 Inch MNPT Cold Water Inlet: 3/4 Inch MNPT Hot Water Outlet: 3/4 Inch MNPT

The 220V ECO180 unit by Marey provides 18kW of power, being the perfect solution for multiple points of use in the southern areas of the US (up to 3 points of use simultaneously in such locations). This unit provides 31°F increase at 4.4 GPM, allowing you to have multiple points of use running simultaneously in hot climates. If you live in colder regions, this unit can reach up to 80°F at 1.5GPM for hot water output at one point of use at time. Marey´s ECO180 is ETL approved and recommended for the whole US territory. This unit must be installed no more than 40 feet from the intended point of use and it must be installed by a professional as its electrical requirements demand (2) 50 Amp breakers. ECO180 has no need for pre-heating as it provides instant hot water on demand. It is activated by water pressure (5 to 85 PSI) from the moment the faucet is opened. The complete ECO line by Marey is the only one in the market with a corrosion resistant patented heating element which reduces hard water build up from chlorine and calcium.