The Best Gas Dryer Carbon Monoxide

Product Description

Monitor your house for dangerous levels of methane, propane, and carbon monoxide with the First Alert GCO1CN Combination Explosive Gas and Carbon Monoxide Alarm with Backlit Digital Display. This explosive gas and CO alarm detects the presence of combustible gases propane and methane and alerts you with a loud 85-decibel alarm. It also comes equipped with an electrochemical CO sensor that accurately detects carbon monoxide leaks from faulty fuel-burning appliances, blocked chimneys, and a variety of other sources. Designed for easy setup, this explosive gas and CO detector plugs into any AC outlet with no additional mounting hardware needed. The alarm can be configured to work with almost any standard household remote control (not included), so you can remotely silence nuisance alarms with the push of a button. The backlit digital display shows current and peak levels, allowing you to easily review the alarm’s readings. For added safety, a backup battery helps keep the alarm functioning even in the event of a power outage. And thanks to a convenient test/silence button, you can easily check whether your alarm is functioning properly and mute false alarms.

Amazon.com

Carbon monoxide (CO) is the leading cause of accidental poisoning deaths in America, yet many people don’t know they are suffering from CO poisoning until its too late. Since symptoms of CO poisoning are like the flu, you might not even know you’re in danger at first. That’s why a carbon monoxide alarm is an excellent way to protect your family. It can detect the CO you can’t see, smell or taste in the air.

The First Alert GCO1CN combination explosive gas and carbon monoxide alarm uses an electrochemical carbon monoxide sensor-the most accurate technology available. It also detects natural gas, methane gas, and propane gas. Installation is as simple as plugging it in to any wall outlet or mounting it above an outlet and plugging in the higher line cord. Its easy-to-read large digital display gives you a clear readout of current hazard and levels. A peak level button alerts you to the highest level of explosive gas or carbon monoxide detected. The alarm includes a battery back-up giving you peace of mind in a power outage. The test/silence button both silences a non-threatening alarm or low battery warning and allows you to test the unit’s functionality. The unit monitors and alarms if carbon monoxide or explosive gas levels persist sounding a loud 85-decibel horn. A low battery signal alerts you to replace the 9-volt battery (included). UL listed. –Bree Norlander

What’s in the Box
One combination carbon monoxide and explosive gas alarm, one 9-volt battery, and user’s manual

Product Description

The Kidde 9Co5 Battery-Operated Carbon Monoxide Detector Utilizes Sophisticated Electronic Components To Protect Individuals And Families. Its Snap-On Cover Provides Immediate Battery Access, While Its Safety Feature Makes It Difficult To Close The Cover If The Batteries ArenMade in: United States Dimensions: 11.5 X 11.5 X 7.5Brand: Kidde Item Weight: 0.75includes: Unit Instruction Guide

Amazon.com

Kidde 9CO5-LP

With the use of sophisticated electronic components, the Kidde 9CO5-LP battery-operated carbon monoxide alarm protects you and your family from the dangers of carbon monoxide. Also included is an intuitive slide-out battery door that gives easy and immediate access to the batteries and a safety feature mechanism that makes the unit difficult to close without the proper installation of the batteries. This easy-to-install alarm is appropriate for all living areas and comes with a 7-year life warranty and 5-year limited warranty.

Consumer Benefits

The Kidde 9CO5-LP will alert you and your family with a loud warning signal against the dangers of elevated carbon monoxide levels in your home. This battery-operated carbon monoxide alarm continuously monitors carbon monoxide levels, even during power outages when AC-only units are not providing protection.

Technical Specifications

This unit uses an electrochemical sensor, and when it detects carbon monoxide, it will alert the user with a distinct pattern. The alarm pattern is four short beeps, followed by five seconds of silence, then four more short beeps with a corresponding red LED light. This cycle will continue for four minutes and then change to one cycle every minute until the device is reset or the carbon monoxide is eliminated. In addition, the red LED light will pulse to indicate carbon monoxide has been detected until the device is reset or carbon monoxide is removed from the surrounding area. When there is no carbon monoxide present, a green LED light will flash every 30 seconds, indicating a properly operating alarm when power is present.

What’s in the Box

One Kidde 9CO5-LP unit and two AA batteries.

Features/Specifications

• Battery operated (3AA batteries included) – Provides protection during power outages
• Battery lockout system – Deters covering battery compartment without installation of batteries
• Slide-out battery door cover – Gives immediate access to batteries
• Test/reset button – Tests the unit for proper operation and can also reset the Carbon Monoxide alarm
• Low battery signal – Alerts user when the battery needs to be replaced
• Green LED – Flashes every 30-seconds to indicate the unit is operating properly
• Red LED – When a dangerous level of carbon monoxide is detected the red LED will pulse and a loud alarm pattern will sound

Product description:
Features:
Adopting high-quality semiconductor calefaction type sensor.
MCU intelligent supervise control and SMT chip technology.
Visual and audible alarm function.
LED numeric display technology, display instant gas leak thickness.
Three indicators: POWER, STATE, ALARM
Specifications:
Detecting gas: LPG, natural gas, and coal gas
Power frequency: 50/60Hz
Power supply: AC100V~AC240V
Rated load: <>
Alarm thickness: LPG: 0.1~ 0.5%; natural gas: 0.1~ 0.3%; coal gas 0.1~ 0.5%
Alarm volume:≥85dB
Working environment: +14℉ – 122℉( -10 ° C ~ 50 ° C)
relative humidity <97>
Storage temperature: -13℉ – 131℉(-25 ° C ~ 55 ° C)
Package includes:
1 x Gas Detector
1 x English User Manual

Product Description

The Kidde KN-COPP-B-LPM battery operated CO alarm provides continuous monitoring of CO levels, even during power outages when many CO incidents occur. The digital display feature allows for easy viewing of carbon monoxide levels from 30-999 PPM (parts per million). The KN-COPP-B-LPM will also detect and store concentration CO levels as low as 11 and up to 999 PPM with its peak level memory display. This alarm includes a slide-out battery door that gives immediate access to the batteries and a safety feature that makes it difficult to close the cover without the batteries being installed. It has a 10-year life and a 10-year limited warranty.

Amazon.com

Kidde’s KN-COPP-LPM battery-operated carbon monoxide alarm with digital display helps to provide your home with extensive protection against the dangerous threat posed by the odorless and colorless gas. With an increasing number of state and local governments passing legislation requiring CO detectors in homes, it’s never been a better time to safeguard your family against carbon monoxide exposure.

KN-COPP-LPM Battery-Operated Carbon Monoxide Alarm At a Glance: Digital display allows for easy monitoring of CO levels Battery operation provides best protection during power outages Peak level memory displays the highest CO concentration since last reset Dimensions: 4.5 inches by 2.75 inches by 1.5 inches; weighs .66 pounds with batteries Five-year limited warranty

Kidde’s KN-COPP-LPM carbon monoxide detector is a free-standing unit, adding flexibility to placement around your home. View larger

Features
The KN-COPP-LPM is an essential device to help warn you and your family of dangerous carbon monoxide levels in your home. This alarm measures the exposure to carbon monoxide over time; it is designed to sound at 85 decibels at 10 feet when it detects 70 ppm (parts per million) of CO for 60 to 240 minutes, 150 ppm for 10 to 50 minutes, or 400 ppm for 4 to 15 minutes. The easily visible digital display indicates the level of CO that the unit is sensing, and it updates the status every 15 seconds for timely and accurate readings. Its free-standing design allows for attachment to a wall or placement on a counter or nightstand for convenient and comprehensive protection. The KN-COPP-LPM also includes a slide-out battery door that provides immediate access to the power source as well as a battery safeguard that makes it difficult to close the cover without batteries installed. An LED lighting system on the unit signals power levels and sourcing: the green LED will flash once every 30 seconds to indicate the alarm is operating properly when power is present, and the red LED will pulse to indicate carbon monoxide has been detected until the device is reset or the CO threat is eliminated. This device has an expected 7-year lifespan and comes equipped with a five-year manufacturer’s limited warranty.

What’s in the Box
One Kidde KN-COPP-LPM battery-operated carbon monoxide alarm with digital display and three AA batteries.

The KN-COPP-LPM features an easy-to-read digital display in front and an easy-access door to the batteries in back. (Click each to enlarge)

See all Product description

As the only US based retailer of this Y201 gas detector, we provide expert support with our chemist on staff to answer any technical questions. Buy confidently; this device is covered by EG Air’s lifetime replacement guarantee. Also included/emailed is a 20+ page eBook on Gas & Air Quality Hazards.

FIND GAS LEAKS AT HOME:
Find the location of any natural gas, propane, LP or fuel leaks by running sensor probe along a gas pipe, fuel line, or fittings near any gas smells. Pinpoint fuel leaks from your lawnmower or car. Gas leak is found when alarm sounds and LEDs light up. Don’t pay a technician’s $100+ diagnostic fee when you can find a gas leak anytime with this propane & natural gas detector.

STEPS/TIPS ON USE: (see video at https://www.amazon.com/dp/B07KM9L69R)
-To detect leaks while minimizing false alarms, turn the sensitivity dial upward toward (+) until the device begins to alarm away from any gas leak. Turn sensitivity dial downward (-) slightly until alarm stops and 1st LED just turns off. Now, any small increase of gas level (as from a leak!) will cause the alarm to sound.
-If alarm sounds prematurely, sensitivity needs to be decreased to prevent false alarms.
-Each leak varies in leak rate and background gas concentration, so adjust sensitivity level to find any leak.
-Allow device to warm up sensor for 10s until yellow “Warm Up” light turns off.

SPECIFICATIONS:
Maximum Sensitivity: 50 ppm
Alarm range: 10%-40% LEL
Warm up time: 10s
Response time: ≤2s (10% LEL)
Alarm: Visual with 6 Red LEDs, Audio with Variable Tone Frequency
Power: 3 AAA batteries

Package Includes:
-Gas Leak Sniffer
-Manual
-Protective Bag

Product Description

The Kidde KN-COEG-3 AC powered, plug-in CO and explosive gas alarm protects you and your family from two deadly threats. The KN-COEG-3 includes 9V battery back up that provides protection during a power outage, when AC-only units can not provide protection. By pressing the Peak Level Button you can see the peak CO level recorded by the alarm since it was last reset or unplugged. The continuous digital display shows you the level of carbon monoxide (if any) the unit is sensing as well as if gas is present. The gas sensor is a metal oxide sensor designed to detect natural gas (methane) or propane. Temperature range- 40 degree fahrenheit to 100 degree fahrenheit.

Amazon.com

Protect your family from the dangers of carbon monoxide (CO), methane, and propane exposure with the Kidde KN-COEG-3 Nighthawk Plug-In Carbon Monoxide and Explosive Gas Alarm. The Nighthawk is an easy-to-install unit that provides reliable protection against the dangers of CO and explosive gas. The digital display shows if gas is present indicates CO levels in parts per million, allowing you to see if, how, and when levels change.

Advanced Technology in an Easy-to-Install, Plug-In Design
Designed for home use, the Kidde KN-COEG-3 Nighthawk is a UL-listed, A/C-powered, plug-in alarm that utilizes sophisticated electronic components and sensor technology to protect you and your family from the dangers of CO, methane, and propane exposure. It plugs directly into a standard A/C outlet and includes a 9-volt battery backup that provides continuous monitoring–even during power outages.

The Dangers of Carbon Monoxide, Methane, and Propane Exposure
The leading cause of accidental poisoning deaths in North America, carbon monoxide (CO) is often referred to as the silent killer because it’s odorless, tasteless, and invisible. Carbon monoxide poisoning can come about via a number of sources, including everyday items and appliances in your home or office. And because symptoms of CO poisoning mimic the flu or other common illnesses it can often go undiagnosed.

Likewise, methane and propane gases are commonly used in homes for cooking, heating, and water heating. Although it happens rarely, gas leaks can sometimes occur inside the home, increasing the risk of fire or explosion.

Audible Alarm Pattern Alerts you to Elevated CO and Gas Levels
When placed on every level of your home, alarms like the KN-COEG-3 Nighthawk can help protect everyone in the house by giving you an unmistakable signal when gas levels have reached an unhealthy point. If unhealthy levels of CO are detected, the alarm will emit four quick audible beeps every five seconds until either levels decrease or the reset button is pressed. If methane gas or propane gas is detected, the alarm will emit beeps every other second with “GAS” shown in the display.

Easy-to-Read Digital Display Shows CO Levels
The KN-COEG-3 Nighthawk is preferred among traditional CO and explosive gas alarms because of its digital display. This display clearly shows levels of CO that the unit has detected and stored– from 30 to 999 ppm–and it updates every 15 seconds to indicate any abrupt changes or alarming trends. The display also shows the peak CO level recorded by the alarm since it was last reset or unplugged. The continuous display also shows if gas is present.

LED Shows Sensor Status
With the KN-COEG-3 Nighthawk, you never have to wonder if the sensor is functioning properly. A blinking dot in the lower right-hand corner of the display denotes normal operation, so you can trust that it’s working. In addition, you can test alarm function by pressing the test/reset button at any time to verify that the horn and electric circuitry are operating properly.

Convenient Mounting Options
The KN-COEG-3 Nighthawk has a low-profile design that makes it suitable for any room in your home. The detector can be plugged into any standard A/C outlet; it’s plug can be snapped into the back of the unit and can be rotated so the alarm remains vertical, independent of whether the electrical socket is mounted vertically or horizontally. In addition, the alarm comes with a 6-foot extension cord, so the unit can be plugged into the wall outlet and then placed on a table or shelf. For the most thorough protection, place an alarm on every level of your home.

The UL-listed Kidde KN-COEG-3 Nighthawk has a seven-year life and is backed by a five-year limited warranty.

About Kidde: A UTC Fire and Security Brand
Renowned for global leadership in fire detection and suppression, Kidde provides solutions ranging from portable fire extinguishers to advanced industrial controls such as flame detection and explosion suppression systems. Kidde is a UTC Fire and Security brand, with a history that’s rich with innovations, from the patent of the Chubb Detector Lock in 1818 to the development of the world’s first wireless networked smoke detectors in 2004.

What’s in the Box
Kidde KN-COEG-3 Nighthawk Carbon Monoxide and Explosive Gas Alarm, 9-volt battery, mounting hardware, and installation guide.

See all Product description

The ET120 is an easy-to-use tester that provides audible and visual alarms in the presence of methane, propane and other combustible gases at concentrations as low as 50 ppm, making it the perfect choice for HVAC professionals. 18-Inch flexible gooseneck. Detection range: 50 to 10000 ppm. Easy to use tester with audible and visual alarms. Over-molded body for comfortable grip. Auto power-off after 10 minutes of non-usage conserves battery life. Includes detector, 4xAAA batteries, instruction manual and storage pouch. For more than 160 years, Klein Tools has manufactured premium-quality, professional-grade hand tools that deliver the performance, durability and precision needed to get the job done right. Our family of engineers, workers and craftsman continue to put six generations of expertise into every tool we create by using only the highest quality materials, superior workmanship, and keeping manufacturing as close to home as we can. Klein isn’t just the name of our company, it’s also our family name. And since we’re an American company that’s family-owned and family-run, you know you can count on us to be here tomorrow. Klein Tools doesn’t just make great products, we make great products that stand up to the demands of the professionals who use them every day … Since 1857.

Product Description

Get alerted to dangerous carbon monoxide leaks with the First Alert CO5120BN Hardwired Carbon Monoxide Alarm with Battery Backup. This carbon monoxide detector uses an advanced electrochemical carbon monoxide sensor that accurately detects elevated CO levels and comes equipped with a microprocessor that helps minimize false alarms. The alarm’s plug-in power connector makes installation quick and easy, while its tamper-resistant mounting bracket lock keeps the alarm secure. Featuring a 9-volt battery backup, this unit is designed to offer seamless detection, even in the event of a power outage. An 85-decibel horn sounds if carbon monoxide levels are too high, and a warning chirp notifies you when the battery needs to be replaced. This carbon monoxide alarm can integrate with up to 12 other First Alert or BRK hardwired alarms and up to six other compatible devices–such as bells, horns, and repeaters–making it ideal for comprehensive coverage of large households or facilities. A latching alarm indicator automatically identifies which unit in the series triggered the alarm. And thanks to the convenient test/silence button, the alarm can be checked easily to ensure it is functioning properly and false alarms can be muted easily.

Amazon.com

The BRK hardwire carbon monoxide alarm detects dangerous CO gas and allows you peace of mind with its battery backup. Carbon monoxide (CO) is a colorless, odorless, deadly gas. It can be emitted by sources including gas or oil furnaces, gas clothes dryers, water heaters, fireplaces, wood stoves, charcoal grills, gas ranges, and space heaters. A clogged chimney, improper venting, and attached garages can also cause carbon monoxide accumulation. According to the Consumer Product Safety Commission (CPSC), at least one CO alarm should be installed near a home’s sleeping area. This BRK alarm is perfect for bedrooms, as well as hallways, and basements.

The BRK CO5120BN hardwire CO alarm with battery backup includes these features:

• Quick plug-in power connector for easy installation.
• 120-volt AC inter-connectable (with maximum 18 compatible devices). The alarm can be interconnected with up to 12 other compatible smoke alarms and six compatible devices like bells, horns, repeaters and door closers. If one unit triggers an alarm, all smoke alarms in the series will sound. Power indicators show which unit in the series initiated the alarm.
• Microprocessor controlled for fewer nuisance alarms.
• Single test/silence button which both silences a non-threatening alarm or low battery warning and allows you to test the unit’s functionality.
• Automatically performs internal test of functionality.
• Latching alarm indicator which automatically identifies which unit initiated the alarm.
• Battery drawer lock and mounting bracket lock for tamper resistance.
• AC power indicator and alarm indicator light.
• Low battery warning “chirp” and missing battery tab.
• Swing open battery drawer for easy battery installation.
• 9-volt battery backup for peace of mind during power outages.

All BRK Electronics carbon monoxide alarms are listed to UL Safety Standard 2034 for residential carbon monoxide alarms. Includes 9-volt backup battery. 5-year limited warranty.–Bree Norlander

What’s in the Box
One carbon monoxide alarm, one 9-volt battery, and user’s manual