Finding your suitable readers for electric nibbler metal cutter is not easy. You may need consider between hundred or thousand products from many store. In this article, we make a short list of the best readers for electric nibbler metal cutter including detail information and customer reviews. Let’s find out which is your favorite one.
900 reviews analysed
1. Makita JN1601 5 Amp 16 Gauge Nibbler
Feature
- Clean and precise work in keystone plate, deck plate and other corrugated sheet materials
- Die rotates 360°
- Large 1/4″” stroke
- Ergonomic, slim body design for easy gripping
- Extremely light (weighs only 3.6 lbs.) for easy handling.Overall Length : 10.25 inches
- Lock-on sliding switch for continuous operation
- Built-in thickness gauge for convenience
- Easy punch and die replacement for reduced down time
- Double insulated
- Wrench (781028-4),Hex Wrench (783208-8),JN3201,JN3200
Description
This Makita nibbler features a 360-degree rotating die, large 1/4in. stroke, sliding switch for continuous use, built-in thickness gauge and easy punch and die replacement. Includes wrench and hex wrench. Cordless: No, Cutting Capacity Mild Steel (gauge): 16, Cutting Capacity Stainless Steel (gauge): 18, Cutting Depth (in.): 1/4, Volts: 115, Inside Cutting Radius (in.): 1 3/4, Strokes Per Minute (SPM): 2,200, Cutting Capacity Aluminum (gauge): 10, Amps: 5, Outside Cutting Radius (in.): 2.
2. WEN 3650 4.0-Amp Corded Variable Speed Swivel Head Electric Metal Cutter Shear
Feature
- Pressure sensitive trigger cuts anywhere from 0 to 2500 strokes per minute
- Attack up to 20 gauge stainless steel and 18 gauge sheet metal
- Lightweight design limits fatigue during operation
- Utilizes a powerful 4-amp motor, curling the metal as it cuts
- Swiveling head rotates a full 360 degrees to meet the needs of any project
Description
Remember when you could cut through metal? Glide through 20 gauge stainless steel or 18 gauge sheet metal with the WEN Variable Speed Electric Metal Shear. The lightweight 4.7-pound design limits fatigue during operation while the powerful 4-amp motor makes easy work out of a variety of metals. The pressure sensitive switch adjusts the speeds of the cut anywhere from 0 to 2500 strokes per minute depending on the force applied. The pivoting head rotates a full 360 degrees to allow for cutting at any angle or direction without having to have an awkward or uncomfortable hold on the shear’s handle. And, because it’s a WEN Product, your purchase comes backed by a two-year warranty, a nationwide network of skilled service technicians and a friendly customer phone line all to make sure you remember WEN.
3. Double Headed Sheet Metal Nibbler, REXBETI Drill Attachment Metal Cutter with Extra Punch and Die, 1 Cutting Hole Accessory and 1 Step Drill Bit, Perfect for Straight Curve and Circle Cutting (gold)
Feature
- Easy and fast to cut 14 gauge material and creates a precision, burr free edge
- 360 degree double cutting head to cut straight line, curve line and circles
- HSS cutting blades to cut including but not limited to: Sheet metal, corrugated material, pipes, complex profiles, powder coated material, stainless steel, copper, aluminium, formica, plastic, fibreglass
- Fits any drill that works between 1500-3000 RPM, More easy and powerful than normal shears and snips
- REXBETI versatile sheet metal nibbler, we offer 5 Years home use warranty and 30 days money guarantee
Description
Cutting sheet metals will never be the same with REXBETI ultimate nibbler. It’s light, compact and sleek. Powered by a standard drill between 1500-3000 RPM, just simply insert the drive shaft in the chuck of your drill and tighten the chuck, exactly like putting in a drill bit. when you start up the drill and the nibbler will be ready to cut. It will be a big time saver for cutting sheet metal and corrugated metal roof sheets. the 360 degree adjustable cutting head allows easy control and has no problem handling any curve or straight you throw to it. Versatile cutting round accessories helps you to easily cut straight and round .Also the iron tool box which holds all parts in helps you no worry to carry them anywhere or lose any.
◆Features:
Perfect for car repair and house maintenance like metal roof cutting, HVAC vent pipe and other metal sheets
Versatile cutting accessories for ROUND and STRAIGHT cutting
Double cutting heads adjust 360 degree for easy cutting in any space
Different cutting shapes available
Best cutting result without any burrs at the cutting edges
No distortion of material
Cuts any shape to 12 mm radius
Extra nibbler die and punch
Safe to touch, easy to work with
Powered by a Hand Drill – no additional power source needed
◆Maximum cutting capacities:
– iron/steel plate 1.8mm
– stainless steel plate 1.2mm
– copper/aluminium plate 2mm
– plastic/fibreglass board 2mm
◆Package included:
1 * metal sheet nibbler cutter
1 * Plastic handle
1 * Cutting round accessories
1 * Extra nibbler cutter die
1 * Nibbler cutter punch
1 * Wrench
1 * Iron tool box
1 * User manual
◆Notice:
To get the best cutting results, please work it on a corded drill with high RPM ( 1500 – 3000 )
4. Genesis GES40 4.0 Amp Corded Swivel Head Variable Speed Electric Power Metal Shear
Feature
- Quickly cuts metal roofing, flashing, and other sheet metal up to 14 gauge | Compare the Genesis metal shear to other drill attachment Shears that can only cut 20 gauge Sheet metal!
- Powerful 4.0 amp motor
- 360° swiveling head for cutting control and convenience |cut circles and curves with the Genesis electric metal shear
- Variable speed (0-2500) SPM for versatility in cutting a variety of materials | cuts through sheet metal up to 14 gauge in thickness!
- Three blade cutting system reduces metal deformation | experience smooth cuts EVERYTIME!
Description
The Genesis GES40 swivel head electric metal sheer tool cuts through various metals with ease with a 4.0 amp motor.
– 4.0 Amp Motor
-360° Swivel Head for cutting curves in sheet metal
-Quickly cuts metal roofing, flashing, and other sheet metal up to 14 gauge
-Three blades work to reduce metal deformation
-Cut 14 Gauge aluminum, 20 gauge stainless steel, or 18 gauge Steel
Genesis’ two year warranty means you buy with confidence.
5. Gino Development 01-0101 TruePower 18 Gauge Heavy Duty Electric Sheet Metal Shear Tin Snips Cutter Nibbler
6. DEWALT DWASHRIR Impact Ready Shears Attachment
Feature
- Able to cut up to 18GA material
- 360 degree swivel head for maneuverability
- Connects via standard 1/4-inch hex shank
- Compatible with most 18V-20V impact driver and drills
- Able to cut up to 18GA material
- Connects via standard 1/4-inch hex shank
- Compatible with most 18V-20V impact driver and drills
Description
The DEWALT DWASHRIR Impact Ready Shears Attachment is able to cut up to 18GA material including but not limited to: Sheet metal, corrugated sheet metal, duct, asphalt shingles, steel mesh, vinyl siding, wire, plastics, cardboard and rubber. This tool features a 360 degree swivel head that allows for maneuverability when cutting. Connects via standard 1/4-inch hex shank. This attachment works with most 18V-20V impact driver and drills, regardless of brand. Attachment only, drill not included.
7. Lnchett Double Head Sheet Nibbler Metal Cutter, Quality Nibbler Drill Attachment for Straight Curve and Circle Cutting, Maximum 14 Gauge Steel
Feature
- ►Easy and fast to cut 14 gauge material and creates a precision, burr free edge
- ►360 degree double cutting head to cut straight line, curve line and circles
- ►HSS cutting blades to cut including but not limited to: Sheet metal, corrugated material, pipes, complex profiles, powder coated material, stainless steel, copper, aluminium, formica, plastic, fibreglass
- ►Fits any drill that works between 1500-3000 RPM, More easy and powerful than normal shears and snips
- ►Lnchett sheet metal nibbler, we offer 5 Years home use warranty and 30 days money guarantee
Description
Cutting sheet metals will never be the same with Lnchett professional nibbler. It’s light, compact and sleek. Powered by a standard drill between 1500-3000 RPM, just simply insert the drive shaft in the chuck of your drill and tighten the chuck, exactly like putting in a drill bit. when you start up the drill and the nibbler will be ready to cut. It will be a big time saver for cutting sheet metal and corrugated metal roof sheets. the 360 degree adjustable cutting head allows easy control and has no problem handling any curve or straight you throw to it. Versatile cutting round accessories helps you to easily cut straight and round .Also the iron tool box which holds all parts in helps you no worry to carry them anywhere or lose any.
8. Astro Pneumatic Tool 727 ONYX Heavy Duty Air Nibbler
9. YaeMarine 500W Electric Iron Scissors Sheet Metal Snips Cutter Nibbler Power Tool 110V
Feature
- 500W Electric Iron Scissors for maximum performance in harsh environments. Special bearings are used to perfectly match high-power motors
- Full Copper Core motor, smooth air inletand exhaust system, good cooling performance, greatly improve the durability ofthe motor
- The Swing of the blade is Smaller than that of the conventionalscissors, which greatly improves the precision of your work !
- Specifications : Rated voltage 110V, Rated Frequency 60Hz, Rated Power 500W, Cutting Thickness 2mm
- Note : You can get the most friendly customer service, please feel free to contact us if you encounter any problems during use, 90 days free return or refund.
Description
Specifications
▪ Name : Electric Iron Shear
▪ Power Input : 500W
▪ Rated Voltage : 110V
▪ Rated frequency : 60Hz
▪ Cutting Thickness : 2mm (600N/m㎡)
▪ No-Load Speed : 2000r/min
▪ Quantity : 1
Features
▪ Full copper core motor, smooth air inletand exhaust system, good cooling performance, greatly improve the durability ofthe motor;
▪ The swing of the blade is smaller than that of the conventionalscissors, which greatly improves the precision of your work !
Applications
▪ Widely used in automobiles and shipbuilding, and all kindsof repairing and other departments in the case of sheet metal, cutting thinplates, metal plates and other plates;
Safety Precaution
▪ Keep the work area clean;
▪ Do not use in rain, excessive humidity,or flammable liquids and gases;
▪ Keep the power cord away from heat, oiland sharp objects. When the power cord is damaged, replace it in time. Do nottouch the exposed conductor to prevent electric shock;
▪ When the tool is not in use, it shouldbe placed in a place that is dry and out of reach of children
▪ Do not exceed the working ability of thetool to use, do not use low-power tools to do heavy work to avoid damage;
▪ Do not use this tool to do work otherthan its work;
▪ The machine should be maintained frequently and refueled regularly;
▪ Wear overalls and protective glasseswhen working;
▪ Unplug the power cord when the tool isnot in use to prevent accidental start-up;
Note
▪ Manual measurement, error 1-3cm, depending on the actual situation, please understand;
▪ You can get the most friendly customer service, please feel free to contact us if you encounter any problems during use, 90 days free return or refund.
Conclusion
By our suggestions above, we hope that you can found Electric Nibbler Metal Cutter for you.Please don’t forget to share your experience by comment in this post. Thank you!