The Best Apple Screen Replacement

Attention Please

Refer to the installation tutorial on Youtube (Related Video Shorts)

Test the screen by inserting the flex to the main board before installation; be sure you feel a gentle snap. If not, try again.

Confirm the phone is power off before installation.

Do not press the left and upper corners of the screen, otherwise may cause lines on the screen.

Each screw should be installed into original location, because they are not same length! Never tighten screw over limit!

Treat flex cables gently, use tools instead of your finger during installation , otherwise the screen will damage!

If you meet with these issues

Cannot turn on, touch insensitive, flash, lines on screen, ghost click etc.

Please try this: Power off your phone, disconnect all the cables including the battery cable, clean the connector on the motherboard, reconnect the cables, leave the phone alone for a while in a dry environment, a hard reset of your phone power on.

Before buying,please carefully review the product image and description,make sure this item is compatitive with your device,if not or you cannot find what you want, please contact us feel free via Amazon.
Specifications:
*Diagonal Screen Size: 13.3 inch
*Apple Part Number：661-02397,661-7475
*LCD Connector: 12 Pins
*Resolution : 1440×900
*LCD Grade: A, Premium Grade
*Warranty: 90 days
*Dead Pixel Policy: LCD Screens are manufactured under ISO 13406-2 and ISO 9241 Class 1 standards, meaning 1 to 5 dead pixels are not considered defective unless they have multiple pixel issues
Compatibility:
Macbook Air A1466 2013 2014 2015 2017, NOT for 2010-2012 models.
Mid 2013 – (EMC2632)MD760LL/A (1.3 GHz Core i5)
Mid 2013 – (EMC2632)MD761LL/A (1.3 GHz Core i5)
Mid 2013 – (EMC2632)MD761LL/A (1.7 GHz Core i7)
Early 2014 – (EMC2632)MD760LL/B (1.4 GHz Core i5)
Early 2014 – (EMC2632)MD761LL/B (1.4 GHz Core i5)
Early 2014 – (EMC2632)MD761LL/B (1.7 GHz Core i7)
Early 2015 – (EMC2925)MJVE2LL/A (1.6 GHz Core i5 or 2.2 GHz)
Early 2015 – (EMC2925)MJVG2LL/A (1.6 GHz Core i5 or 2.2 GHz Core i7)
Mid 2017 – (EMC3178)MQD42LL/A (1.8 GHz Core i5)
Mid 2017 – (EMC3178)MQD32LL/A (1.8 GHz Core i5)
Mid 2017 – (EMC 3178) Z0UU1LL/A (1.8 GHz Core i5)

Note:
*Images show actual product, please verify all connectors and specifications carefully.
*Please be careful to take the screen out of the box.This product should be very careful when installation, we are not responsible for the damage in the process of installation.
*Please check and test the screen before installing,it’s important. Any issues, feel free to contact us.
*We are not responsible for duties,local taxes or any other importation fees.Hoping you understand.
Package Include:1 x MacBook Air 13″ A1466 2013 2014 2015 2017 LCD LED Screen Display Complete Assembly

Only for iPhone X 5.8′, Not for XR XS XSMAX .
The screen replacement is without Ear Speaker, Front Camera, Proximity Sensor and Home Button, so please swap them out from your old screen and install them. 
Note: 
1. Don’t press four corners and be careful when lock screws, otherwise it will cause inner glass broken. 
2. Make sure each screw is installed back to its original hole. 
3. Be gentle and cautions to the flex cable connectors when installing. 
4. Please check the OLED and make sure the flex cable is in good condition and there is no debris on the connector. 
5. DO NOT over-bend or use excessive force to tear it. 
6. Please please disconnect battery flex cable of your phone before you install our new screen, this is very important. Otherwise, the screen will not turn on.
Problem Solution
If your phone has some problems after installed. For example, cannot turn on, no touch, no home button function, flashing, lines on screen etc., please follow these steps: 
1. Reinstall all flex cables from the motherboard and double check all flex cable is in good condition. 
2. Restart your phone: Reset the phone by holding both Power and Home button together pressed for min 15 sec, after few mins, turn the phone on. Or reconnect your battery. 
Package Include: 
Pre-installed OLED screen, installation manual, 3 x Magnetic screwdrivers, crowbar, wiper, suction cup, screen protector, SIM card opener and plastic triangle opening tool.

Suitable model:Only fit for iPhone 11 Pro Max screen replacement 6.5 inch, compatible with Model (A2161, A2220, A2218) (6.5 inch)

NOTE:
①This screen replacement kit will only compatible with iPhone 11 Pro Max 6.5 inch.
Please make sure you identify your Phone correctly before purchase.
②The repair tools, tempered glass screen protector and instruction comes in the package.
③This iphone 11 Pro Max screen repair kit without Proximity Sensor, Ear Speaker,so please swap them out from your old screen and install them.

Installation Note:
1.It’s better to search related installing video on Youtube before installation, our instructions only as a reference.

2.Please keep your phone power off and disconnect the battery cable when assembling.

3.There are different sizes and length screws when you replace your iPhone display Assembly,
please use Screw Pad to mark each screw and put them in the original place [VERY IMPORTANT].
Otherwise the screen will be easy broken if you put the screw in the wrong place.

4.Check the screen replacement to make sure the flexible cable in good condition and no debris/visible dust on the connector.

Package list:

????????????Please note!!!
1. It never come with HOME BUTTION.
2. Only for iPhone 8 Plus screen replacement(A1864, A1897, A1898)

If you meet some problems like can’t turn on, touch insensitive, flash, lines on screen etc, please follow below steps:
1. Please check the LCD to make sure the flex cables are in good condition and there are no debris on the connector.
2. Disconnect and reconnect the flex cables from the motherboard side.
3. Then Reboot: Hold buttons (Home, Up volume, and Power button) untill the phone switch down and then switch up again.
4. Make sure software has been upgraded to the latest version.
5. Please leave phone alone overnight and see if this problem persists in the morning. Sometimes there is static after installing that will go away after some time.

????What’s in the package?????
1. iPhone 8 Plus screen replacement display assembly:
– LCD display touch screen
2. Screen protector for iPhone 8 Plus
3. Repair tools set:
1 x Philips screwdriver
1 x Pentalobe screwdriver
2 x Triangle Pry Pick
1 x Suction Cup
1 x Dust Wipes
1 x Sim card pin

????Tips????:
1. Make sure your phone is powered off before installation. This step will protect your phone from incorrect installation short circuit damage.

2. Mark each screws when you unscrewed them. You might broke your screen if you put the screw in a wrong hole.

3. For the beginners, you’d better watch at least one repair guide.

4. Be careful with the flex cables, they are very sensitive and frangible.

????Further help please contact us via Contact Seller on Amazon????

Color:

white

Description:
1. compatible with iPhone 6s 4.7 inch Screen with 3D touch , NOT for other models, used for replace cracked, broken, dead pixy, damaged, touch is not working, touch response issues, non-functioned screen.
2. For defective, cracked, scratched and faulty lcd touch screen. Will share reference Instruction manual with every customer.
3. Brand-new, 100% tested before shipping and working perfectly ,For question regarding the warranty or product, please contact customer service in advance, and ask for their help to solve the problem.
4. Pre-assembled front camera ,Ear Speaker, and Approximity Sensor. Please transfer the home button from your old screen(Because your original button has entered your fingerprint information） .
5. Good customer service and Fast shipping from USA(FBA)+Free tool + Repair Manual

Note:

1.Disconnect the battery cable before installation or make sure your phone is powered off.
2.There are many screws when you replacing the assembly which are different in size and length.it may broke the screen if you put the screw in wrong place.
3.If after install the screen there appear regular lines on the screen or the screen can’t be touched, please Remove the LCD screen and clean the connectors.Lines are normally caused to the LCD cable is not correct clipped or some dust in the connectors.
4.Please email to me if any product issue, I will try my best to provide good service for you.

Package:

1x LCD Screen Replacement
1x Replacement Repair Tools Kit
1x Repair Manual

Model:Only fit for iPhone 11 screen replacement 6.1 inch Black, compatible with Model No. A2111 A2223 A2221