Top 10 Alfa Romeo Authorized Services

CX800.1 Mono Amplifier

This CX-Series Mono Amp is now one-ohm stable, giving you even more power and wiring options for your system! Using a Class-D power plant, the CXA800.1 features a variable bass boost with KickEQ, giving you as much as a 6dB of extra bump with a simple turn of the optional CXARC Remote Bass Controller. A powerful 12dB crossover and 24dB subsonic filter is included, letting you quickly tune your system to perfection. Use the full-range outputs to expand your system with other bass amps, or a full-range amp to complete your system.

CX-Series Amplifiers accept up to 40 volts (400 watts) of speaker-level input signal. This kind of flexibility both makes line-out converters unnecessary.

Feature Hightlights:
Efficient Class-D amplifier
Three-second turn-on/off delay to eliminate unwanted interference
Variable 12dB crossovers provides control to dial in perfect sound
KickEQ 6dB variable bass boost for those additional low frequencies
24dB subsonic filter for protection from potentially damaging frequencies
FIT+ (Fail-safe Integration Technology-PLUS) means it works with nearly every radio
Accepts up to 40-volt input signal
Small footprint for easier installation
Compatible with CXARC (link to remote) Remote Bass Control
Vertical mounting hardware included for another unique look

Specifications:
Power (watts/ch) 4 Ohm – 300×1
Power (watts/ch) 2 Ohm – 600×1
Power (watts/ch) 1 Ohm – 800×1
CXRC Remote Bass Capable (sold sep.) – yes
Dimensions (in, cm): Height: 2-3/8, 5.9; Width: 6-3/4, 17; Length: 8-1/8, 20.6
Frequency Response (Hz): 25-200, +0/-1dB
Input Sensitivity: 250mV-10V (Low Level)1V-40V (High Level)
Signal-to-Noise Ratio: >95dB, a-weighted, re: rated power
Active Crossover: Variable Lo-pass 50Hz–200Hz, 12dB/octave
Subsonic Filter: 25Hz @24dB/octave
KickEQ Boost Variable 0-6dB @40Hz

The Punch P1000X1bd mono amplifier pumps out 1,000 Watts into a 1-Ohm load. The Class-BD technology produces bass more efficiently over traditional amps, and its frequency response is optimized for subwoofers.

The Punch P600X4 is a 4-channel amplifier producing 150 Watts into all four channels at 2-Ohm. The P600X4 is perfect for a 4-way full-range system or a 3-way system having a front stage with subwoofers on the rear channels.

Product Description

Since day one, we have spearheaded the car audio revolution. Nothing has changed. Rockford Fosgate is still the global leader in audio innovation and your passion is our purpose. We engineer the best audio systems for your lifestyle!

Amazon.com

The new Constant Power amplifiers are some of the most powerful amplifiers on the market. The T1500-1bdCP is based on the legendary T1500-1bd amplifier design with a proprietary “Constant Power” configuration delivering up to 25% more power (Watts) across all impedance loads. The listening experience is cleaner, louder and more impressive than ever before. At 1,500 watts, this monster will run any demo vehicle competing in Sound Pressure Level.

Rockford Fosgate Power Series Amplifiers Power > Size. These compact amps deliver the same gut wrenching power as its big brother, but their chassis designs are up to 40% smaller. DTM (Dynamic Thermal Management) allows efficient heat transfer that minimizes physical size and enables installs under seats and other compact areas when abundant power is required.

The “Constant Power” configuration delivers up to 25% more power (Watts) across all impedance loads. Click to enlarge.

Pass-thru connection for easy system-building. Click to enlarge.

Small chassis designs with serious power. Click to enlarge.

T1500-1bdCP Features

• 24dB/octave crossover
• 4 Gauge power/ground terminals
• Audiophile grade speaker connections
• Infrasonic filter
• MOSFET output stage
• MOSFET power supply
• RCA pass-thru

CEA-2006
Power ratings on Rockford Fosgate amplifiers conform to CEA-2006 industry standards. These guidelines mean your amplifier’s output power ratings are REAL POWER numbers, not inflated marketing ratings.

Class bd
Rockford Fosgate bd topology is a revolutionary patented design, integrating a technology that is more efficient than typical class AB and has lower distortion than class D designs. POWER bd amplifiers are 75-80% efficient vs. 20-60% efficient class ab amplifiers. What does that mean? More power from your amplifier with less drain on your vehicles electrical and charging system.

Constant Power
Music and speakers have a dynamic relationship. As the frequency of music varies, so does the impedance of the speaker. This patent pending technology gives the amplifier the ability to instantaneously deliver its maximum output power to the speaker without regard to its varying impedance while still maintaining its high-efficiency and thermal performance.

Differential Inputs
Differential input circuitry measures the voltage of both the (+) and (-) input signal. The circuitry subtracts the voltage common to both conductors (noise) resulting in only the clean signal. This allows only clean signal to enter the amplifier.

DSM
DSM utilize 1% tight-tolerances improving efficiency of the circuit, decreases cross-talk from other discrete components and lowers operating temperature.

Dynamic Thermal Management
Heat is often inefficiently dissipated across a heatsink causing “hot spots”. Rockford Fosgate engineers have developed an award winning cooling design called DTM. This patent pending design seamlessly manages the output of power supply temperatures, while evenly distributing the excess heat across the entire amplifier.

MEHSA³
MEHSA³ (Maximum Efficiency Heat Sink Application–gen. 3) reduces MOSFET temperatures, lowers distortion, increases durability and prolongs the output device life span.

Punch EQ2
In the early 70’s, Jim Fosgate studied the acoustical properties of automobiles. Utilizing a real-time analyzer and pink noise, he would graph out the acoustical characteristics of each car he tested. Jim discovered three problems that were common to all cars: a midbass hump between 100-275Hz, a steep roll-off of high frequencies from 2kHz up to 20kHz, and reduced bass response below 50Hz.

The Punch EQ on-board equalization circuit helps correct for these acoustical deficiencies in the listening environment. When set to Low-Pass(LP) operation, it becomes a variable Bass Boost. When set to High-Pass (HP) operation, it acts as a variable Mid-Bass and Treble Boost. When set to All Pass (AP) operation, both Bass and Treble frequencies are boosted.

Rockford Fosgate Avatar
These Avatars are a personal signature from the Rockford Fosgate team member who designed and engineered this fanatic product. This statement illustrates Rockford’s commitment to being Designed and Engineered in the U.S.A.

TO-247 MOSFETs
Rockford Fosgate amps use custom TO-247 MOSFETs. These have 60% more metal tab area for more power capacity, lower impedance and improved heat dissipation over traditional TO-220 MOSFETs found in competitor amps.

T1500-1bdCP Specifications

Thirty Years of Rockford Fosgate

Rockford Fosgate products have been designed and engineered in Tempe, Arizona since the beginning. Rockford’s 30 year reputation is grounded in engineering and manufacturing some of the finest audio products in the world. The company’s no-compromise approach has yielded patented iconic products such as the Punch EQ, Punch 45 amplifier and the 3Sixty integrated signal processor. Today, Rockford’s new products push the performance envelope even further. Each new product is a step forward–they sound bigger, they play louder, and run longer. Rockford never settles for “good enough.”

The 2010 product line represents the company’s core philosophy. Rockfords new amplifiers, speakers and subwoofers have raised the bar on the competition.

What’s in the Box

Rockford Fosgate Power T1500-1BDCP 1500 watt mono amplifier, Mounting Hardware, User’s Manual

Power Series “Constant Power” Amplifiers

Rockford Fosgate Power T500-1BDCP 500 watt mono amplifier	Rockford Fosgate Power T1000-1BDCP 1000 watt mono amplifier	Rockford Fosgate Power T1500-1BDCP 1500 watt mono amplifier

Jensen power 760 hi-fi amplifier (4-channel, 760-watt) * 2 Stable ; variable low pass filters 40 hz240 hz (12 db per octave); variable high pass filters 40 hz400 hz (12 db per octave); variable bass boost 012 db at 45 hz ; low level pass trough rcas (channel 1 & 2 only) ; encapsulated power & speaker connectors;channel-mode selector switch (4/3/2 channels) bridge- / tri-mode capability;tri-mode ; protection circuit that safeguards against short circuits, dc-offset & thermal overload; green operation & red protection leds; 4 channel-amp; peak power: 760w ; nominal output power: 4x75w x 195w ;4×100

The Punch P300X2 is a 2-channel stereo amplifier capable of producing 150 Watts into each channel at 2-Ohms. The P300X2 amplifier is great with full-range or component systems and can be bridged for use with smaller subwoofers.

Patented, durable, and long-lasting rubber design. Fits most sedan vehicles. Easy installation with adjustable straps and hook to inside of your trunk. Folds into your trunk cargo area with ease when not in use. Mildew and stain resistant – loose dirt can be shaken out or vacuumed, and hard soiled areas can be hosed down with water and allowed to dry. High-Intensity Safety Reflectors make the Bumper Butler stand out to vehicles parking behind you and helps make your vehicle noticeable in emergency situations. Strong security straps – Help Deter Theft – Ultra Heavy Duty. Protects the rear bumper from low-speed impacts from parallel parking thereby preventing scratches. Conforms to the vehicle’s unique contours and blends with its shape and does not detract from its stylish appearance. WARNING: Intended to be used on parked vehicles ONLY! Never drive with the Bumper Butler attached.