Nowadays, there are so many products of alfa romeo authorized services in the market and you are wondering to choose a best one.You have searched for alfa romeo authorized services in many merchants, compared about products prices & reviews before deciding to buy them.
You are in RIGHT PLACE.
Here are some of best sellings alfa romeo authorized services which we would like to recommend with high customer review ratings to guide you on quality & popularity of each items.
513 reviews analysed
1. Kicker 46CXA8001 Car Audio Class D Amp Mono 1600W Peak Sub Amplifier CXA800.1
Feature
- Efficient Class-D amplifier
- Variable 12dB crossovers provides control to dial in perfect sound
- KickEQ 6dB variable bass boost for those additional low frequencies
- Variable 12dB crossovers provides control to dial in perfect sound
- 24dB subsonic filter for protection from potentially damaging frequencies
Description
CX800.1 Mono Amplifier
This CX-Series Mono Amp is now one-ohm stable, giving you even more power and wiring options for your system! Using a Class-D power plant, the CXA800.1 features a variable bass boost with KickEQ, giving you as much as a 6dB of extra bump with a simple turn of the optional CXARC Remote Bass Controller. A powerful 12dB crossover and 24dB subsonic filter is included, letting you quickly tune your system to perfection. Use the full-range outputs to expand your system with other bass amps, or a full-range amp to complete your system.
CX-Series Amplifiers accept up to 40 volts (400 watts) of speaker-level input signal. This kind of flexibility both makes line-out converters unnecessary.
Feature Hightlights:
Efficient Class-D amplifier
Three-second turn-on/off delay to eliminate unwanted interference
Variable 12dB crossovers provides control to dial in perfect sound
KickEQ 6dB variable bass boost for those additional low frequencies
24dB subsonic filter for protection from potentially damaging frequencies
FIT+ (Fail-safe Integration Technology-PLUS) means it works with nearly every radio
Accepts up to 40-volt input signal
Small footprint for easier installation
Compatible with CXARC (link to remote) Remote Bass Control
Vertical mounting hardware included for another unique look
Specifications:
Power (watts/ch) 4 Ohm – 300×1
Power (watts/ch) 2 Ohm – 600×1
Power (watts/ch) 1 Ohm – 800×1
CXRC Remote Bass Capable (sold sep.) – yes
Dimensions (in, cm): Height: 2-3/8, 5.9; Width: 6-3/4, 17; Length: 8-1/8, 20.6
Frequency Response (Hz): 25-200, +0/-1dB
Input Sensitivity: 250mV-10V (Low Level)1V-40V (High Level)
Signal-to-Noise Ratio: >95dB, a-weighted, re: rated power
Active Crossover: Variable Lo-pass 50Hz–200Hz, 12dB/octave
Subsonic Filter: 25Hz @24dB/octave
KickEQ Boost Variable 0-6dB @40Hz
2. Rockford Fosgate Punch P1000X1BD 1000 Watt Class-bd Mono Amplifier
Feature
- 300 Watts x 1 @ 4-Ohm / 500 Watts x 1 @ 2-Ohm / 1000 Watts x 1 @ 1-Ohm. Short circuit protection
- Works with factory installed & aftermarket source units
- Onboard 12dB/octave LowPass crossover & Infrasonic filter
- On-board Punch EQ with +18dB boost at 45Hz
- Cast Aluminum Heatsink with Stealth top mounted control panel
Description
The Punch P1000X1bd mono amplifier pumps out 1,000 Watts into a 1-Ohm load. The Class-BD technology produces bass more efficiently over traditional amps, and its frequency response is optimized for subwoofers.
3. Rockford Fosgate P600X4 Punch 600 Watt 4 Channel Amplifier
Description
The Punch P600X4 is a 4-channel amplifier producing 150 Watts into all four channels at 2-Ohm. The P600X4 is perfect for a 4-way full-range system or a 3-way system having a front stage with subwoofers on the rear channels.
4. Rockford Fosgate T1500-1bdCP Power 1,500 Watt Class-bd Constant Power Amplifier
Feature
- The Power T1500-1bdCP mono amplifier featuring Constant Power, is truly the best of the best and delivers 1500 Watts of POWER
- Proprietary Constant Power amps are the most powerful on the market, delivering up to 25% more power across all impedance loads (1000 Watts x 1 @ 4-Ohm or 1500 Watts x 1 @ 2-Ohm or 1500 Watts x 1 @ 1-Ohm)
- Highly efficient Class bd produces max power with minimal strain on the vehicle’s electrical system. Our full chassis amp (2.14” x 8.14” x 14.91”) is optimized for use with subwoofers in cars/trucks
- Balanced differential RCA pass-thru outputs, On-board Punch EQ with +18dB boost @ 45Hz and 24dB/octave Butterworth crossover make the T1500-1bdCP an impressive POWER house
- Famous Rockford Fosgate build quality insures that the T1500-1bdCP will handle everything you throw at it! Full 2-year parts and labor warranty when purchased from an authorized Rockford Fosgate reseller
Description
Product Description
Since day one, we have spearheaded the car audio revolution. Nothing has changed. Rockford Fosgate is still the global leader in audio innovation and your passion is our purpose. We engineer the best audio systems for your lifestyle!
Amazon.com
The new Constant Power amplifiers are some of the most powerful amplifiers on the market. The T1500-1bdCP is based on the legendary T1500-1bd amplifier design with a proprietary “Constant Power” configuration delivering up to 25% more power (Watts) across all impedance loads. The listening experience is cleaner, louder and more impressive than ever before. At 1,500 watts, this monster will run any demo vehicle competing in Sound Pressure Level.
Rockford Fosgate Power Series AmplifiersPower > Size. These compact amps deliver the same gut wrenching power as its big brother, but their chassis designs are up to 40% smaller. DTM (Dynamic Thermal Management) allows efficient heat transfer that minimizes physical size and enables installs under seats and other compact areas when abundant power is required. |
The “Constant Power” configuration delivers up to 25% more power (Watts) across all impedance loads. |
Pass-thru connection for easy system-building. |
Small chassis designs with serious power. |
T1500-1bdCP Features
- 24dB/octave crossover
- 4 Gauge power/ground terminals
- Audiophile grade speaker connections
- Infrasonic filter
- MOSFET output stage
- MOSFET power supply
- RCA pass-thru
CEA-2006
Power ratings on Rockford Fosgate amplifiers conform to CEA-2006 industry standards. These guidelines mean your amplifier’s output power ratings are REAL POWER numbers, not inflated marketing ratings.
Class bd
Rockford Fosgate bd topology is a revolutionary patented design, integrating a technology that is more efficient than typical class AB and has lower distortion than class D designs. POWER bd amplifiers are 75-80% efficient vs. 20-60% efficient class ab amplifiers. What does that mean? More power from your amplifier with less drain on your vehicles electrical and charging system.
Constant Power
Music and speakers have a dynamic relationship. As the frequency of music varies, so does the impedance of the speaker. This patent pending technology gives the amplifier the ability to instantaneously deliver its maximum output power to the speaker without regard to its varying impedance while still maintaining its high-efficiency and thermal performance.
Differential Inputs
Differential input circuitry measures the voltage of both the (+) and (-) input signal. The circuitry subtracts the voltage common to both conductors (noise) resulting in only the clean signal. This allows only clean signal to enter the amplifier.
DSM
DSM utilize 1% tight-tolerances improving efficiency of the circuit, decreases cross-talk from other discrete components and lowers operating temperature.
Dynamic Thermal Management
Heat is often inefficiently dissipated across a heatsink causing “hot spots”. Rockford Fosgate engineers have developed an award winning cooling design called DTM. This patent pending design seamlessly manages the output of power supply temperatures, while evenly distributing the excess heat across the entire amplifier.
MEHSA3
MEHSA3 (Maximum Efficiency Heat Sink Application–gen. 3) reduces MOSFET temperatures, lowers distortion, increases durability and prolongs the output device life span.
Punch EQ2
In the early 70’s, Jim Fosgate studied the acoustical properties of automobiles. Utilizing a real-time analyzer and pink noise, he would graph out the acoustical characteristics of each car he tested. Jim discovered three problems that were common to all cars: a midbass hump between 100-275Hz, a steep roll-off of high frequencies from 2kHz up to 20kHz, and reduced bass response below 50Hz.
The Punch EQ on-board equalization circuit helps correct for these acoustical deficiencies in the listening environment. When set to Low-Pass(LP) operation, it becomes a variable Bass Boost. When set to High-Pass (HP) operation, it acts as a variable Mid-Bass and Treble Boost. When set to All Pass (AP) operation, both Bass and Treble frequencies are boosted.
Rockford Fosgate Avatar
These Avatars are a personal signature from the Rockford Fosgate team member who designed and engineered this fanatic product. This statement illustrates Rockford’s commitment to being Designed and Engineered in the U.S.A.
TO-247 MOSFETs
Rockford Fosgate amps use custom TO-247 MOSFETs. These have 60% more metal tab area for more power capacity, lower impedance and improved heat dissipation over traditional TO-220 MOSFETs found in competitor amps.
T1500-1bdCP Specifications
Number of Channels: | 1 |
Rated Power: | 1000W x 1 @ 4-Ohms RMS 1500W x 1 @ 2-Ohms RMS 1500W x 1 @ 1-Ohm RMS |
Total Power: | 1500 Watts |
Dynamic Power: | 1320 Watts |
Bridgeable: | No |
Efficiency (average): | 86.2% @ 4-Ohm 74.6% @ 2-Ohm 63.0% @ 1-Ohm |
Crossover Controls: | Low-Pass (LP): 35-250Hz 24dB/octave Butterworth |
Tone Controls: | Bass: 0dB to +18dB @ 45Hz Infrasonic Filter: -3dB @ 28Hz 12dB/Octave |
Signal Input: | Low level: 1 RCA pair |
Signal Output: | Low level: 1 RCA pair |
Power Input Connector: | Block |
Power Wire Gauge: | 4 AWG |
Speaker Output Connector: | Screw terminal barrier strip |
Speaker Wire Gauge: | 8 AWG to 18 AWG |
Heat Sink Type: | Cast aluminum |
Cooling: | Convection |
Remote Controls: | Optional Remote Punch EQ (overrides built-in Punch EQ) |
Visual Indicators: | Power Thermal Protect |
Circuit Topology Class: | Class bd |
Frequency Response: | 20Hz to 250kHz +/- 0.5dB |
Shipping Weight: | 14.35 Lbs. (6.50 Kg.) |
Dimensions (HxWxL): | 2.14 x 8.14 x 14.91 (in) 5.42 x 20.68 x 37.86 (cm) |
Thirty Years of Rockford Fosgate
Rockford Fosgate products have been designed and engineered in Tempe, Arizona since the beginning. Rockford’s 30 year reputation is grounded in engineering and manufacturing some of the finest audio products in the world. The company’s no-compromise approach has yielded patented iconic products such as the Punch EQ, Punch 45 amplifier and the 3Sixty integrated signal processor. Today, Rockford’s new products push the performance envelope even further. Each new product is a step forward–they sound bigger, they play louder, and run longer. Rockford never settles for “good enough.”
The 2010 product line represents the company’s core philosophy. Rockfords new amplifiers, speakers and subwoofers have raised the bar on the competition.
What’s in the Box
Rockford Fosgate Power T1500-1BDCP 1500 watt mono amplifier, Mounting Hardware, User’s Manual
Power Series “Constant Power” Amplifiers
Rockford Fosgate Power T500-1BDCP 500 watt mono amplifier | Rockford Fosgate Power T1000-1BDCP 1000 watt mono amplifier | Rockford Fosgate Power T1500-1BDCP 1500 watt mono amplifier |
5. Jensen Power760 4-Channel 760 Watt Amplifier (Black)
Description
Jensen power 760 hi-fi amplifier (4-channel, 760-watt) * 2 Stable ; variable low pass filters 40 hz240 hz (12 db per octave); variable high pass filters 40 hz400 hz (12 db per octave); variable bass boost 012 db at 45 hz ; low level pass trough rcas (channel 1 & 2 only) ; encapsulated power & speaker connectors;channel-mode selector switch (4/3/2 channels) bridge- / tri-mode capability;tri-mode ; protection circuit that safeguards against short circuits, dc-offset & thermal overload; green operation & red protection leds; 4 channel-amp; peak power: 760w ; nominal output power: 4x75w x 195w ;4×100
6. K&N HP-1010 Performance Wrench-Off Oil Filter
Feature
- O/E replacement oil filters for most cars, trucks, SUV’s, motorcycles, & ATV’s
- Resin-impregnated filter media traps 99% of harmful contaminants
- 1 In. exposed nut designed for easy oil filter removal
- Heavy duty construction for extreme conditions
- Anti-drainback valve (where applicable) eliminates dry starts, prevents oil from draining back into crankcase during engine shutdown
7. Rockford Fosgate P300X2 Punch 300 Watt 2-Channel Amplifier
Feature
- The Punch P300X2 is a full chassis (2.38” x 7.76” x 9.86”) 2-channel stereo amplifier, that delivers a rocking 300 Watts of RMS Power
- Versatile design for full-range or component systems or can be bridged for use with smaller subwoofers (RMS Power Output: 100 Watts x 2 @ 4-Ohm OR 150 Watts x 2 @ 2-Ohm OR 300 Watts x 1 @ 4-Ohm Bridged)
- RCA inputs can accept both Hi and Low level audio signals without the need of a signal converter
- Featuring Class-A/B topology, on-board Punch EQ with +18dB boost @ 45Hz, variable 12 dB/Oct Butterworth crossovers, and C.L.E.A.N. Set-up
- Famous Rockford Fosgate build quality with a full 1-year warranty when purchased from an authorized Rockford Fosgate reseller
Description
The Punch P300X2 is a 2-channel stereo amplifier capable of producing 150 Watts into each channel at 2-Ohms. The P300X2 amplifier is great with full-range or component systems and can be bridged for use with smaller subwoofers.
8. Rockford Fosgate PM1000X1bd Punch Marine 1,000 Watt Class-bd Mono Amplifier
Feature
- Marine grade compact amp (2.4″ x 7.8″ x 13.3″) designed for motorsport and marine applications, is packed with features and performance to deliver power and bass on demand with 1000 Watts of RMS power
- 1-ohm capability will drive a pair of 4-ohm DVC subwoofers or quad-configuration of 2-ohm DVC subwoofers with ease (RMS: 300 Watts x 1 @ 4-Ohm or 500 Watts x 1 @ 2-Ohm or 1000 Watts x 1 @ 1-Ohm)
- Super-efficient Class-bd circuit topology, the PM1000X1bd assures maximum BOOM for your buck! Dedicated to a low frequency response, this amp is optimized for mid-bass speakers or subwoofers only
- High level input capable with Auto Turn-On circuit, On-board Punch EQ with +18dB boost @ 45Hz and 12dB/octave Butterworth crossover make the PM1000X1bd a serious power house
- Famous Rockford Fosgate build quality insures that the PM1000X1bd will handle everything you throw at it! Full 2-year parts and labor warranty when purchased from an authorized Rockford Fosgate reseller
9. FH Group F16408 Black-F16408 F16408BLACK Universal Fit Rear BumperButler Bumper Guard Protector
Feature
- WARNING: Intended to be used on parked vehicles ONLY! Never drive with the Bumper Butler attached.
- Dimensions: 43 X 11 inches
- Easy installation with adjustable straps and hook to inside of your trunk. Folds into your trunk cargo area with ease when not in use
- Patented, durable, and long-lasting rubber design
- Fits most sedan vehicles
- High-Intensity Safety Reflectors make the Bumper Butler stand out to vehicles parking behind you and helps make your vehicle noticeable in emergency situations
Description
Patented, durable, and long-lasting rubber design. Fits most sedan vehicles. Easy installation with adjustable straps and hook to inside of your trunk. Folds into your trunk cargo area with ease when not in use. Mildew and stain resistant – loose dirt can be shaken out or vacuumed, and hard soiled areas can be hosed down with water and allowed to dry. High-Intensity Safety Reflectors make the Bumper Butler stand out to vehicles parking behind you and helps make your vehicle noticeable in emergency situations. Strong security straps – Help Deter Theft – Ultra Heavy Duty. Protects the rear bumper from low-speed impacts from parallel parking thereby preventing scratches. Conforms to the vehicle’s unique contours and blends with its shape and does not detract from its stylish appearance. WARNING: Intended to be used on parked vehicles ONLY! Never drive with the Bumper Butler attached.
10. Rockford Fosgate PBR300X4 Punch BRT 300-Watt Ultra Compact 4-Channel Amplifier
Feature
- Four-channel, 4-ohm (only) amplifier with 75 Watts x 4 @ 4-Ohms RMS power rating and 300 watts RMS total power. The suggested alternator is 75 A and the recommended fuse is 50 A
- Designed for stereo front/rear systems that require little space–just 1.53 x 4.25 x 6.75 inches
- High- and low-level inputs with variable 4-6 volt hi level DC offset voltage input turn-on control
- Selectable 80Hz LP/AP/80Hz HP filter @ 12dB/Octave
- One-year limited warranty
Conclusion
By our suggestions above, we hope that you can found Alfa Romeo Authorized Services for you.Please don’t forget to share your experience by comment in this post. Thank you!