979 reviews analysed
1. Auto Meter 2697 Z-Series in-Dash Electric Tachometer
Feature
- Traditional incandescent lighting illuminates around the perimeter of the dial
- Compatible with 2 – 4 pulse ignition signals (4-8 cylinder engines) with points, electronic, and most 12V high-performance racing ignitions.
- 12 and 16 volt compatible, well-suited with nearly every street car or race car electrical system
- Gauge kit includes bulb and socket assembly, red and green bulb covers, mounting hardware, and detailed instructions for installation
- Auto Meter’s race proven air-core electric tachometers provide quick and accurate readings with a needle so responsive it can go from 0 – full scale in 333 milliseconds
Description
High performance movements and understated good looks make this series a perfect choice for low-key instrumentation. Features rugged air core meter. Subtle all black design for a factory look. Precision movement and extreme accuracy. 1 year limited warranty.
2. MOTOR METER RACING Universal Tachometer for Alternator 3-3/8" 4000 RPM Black Dial in Dash
Feature
- SPECIFICATION: Standard 3-3/8″ (85mm) dial for a 3-3/4″ (95mm) opening.
- FEATURES: Designed for in-dash
- tachometer suitable for diesel automotive, “W” terminal on the alternator & requires 12 or 24-volt negative ground systems.
- PACKAGED: Light bulb(for 12V and 24V), U-bracket kit, VR stick.
- WARRANTY: One-year for non-human factor damage and free lifetime technical support.
- Made in Taiwan
3. MOTOR METER RACING Universal Tachometer for Alternator 2" 6000 RPM White Dial in Dash
Feature
- SPECIFICATION: Standard 2″ (52mm) dial for a 2-1/16″ (52.4mm) opening.
- FEATURES: Light bulb illumination
- Tachometer suitable for diesel automotive, “W” terminal on the alternator & requires 12 negative ground systems. Adjust the pole of number easily form gauge back.
- PACKAGED: U-bracket kit, VR stick, installation manual.
- WARRANTY: One-year for non-human factor damage and free lifetime technical support.
- Made in Taiwan
4. Auto Meter 3-3/8" 5204 Solutions Gauge Mount, 3 3/8", Pedestal W/Black Cup
Description
Finding the perfect place to mount your auto meter gauge can be a challenge sometimes. Using auto meter’s universal gauge cup, you can mount your gauge anywhere you see fit. The universal pedestal gauge cup can be mounted inside or outside of the cabin, on top, or under the dash. The possibilities are endless.
5. W Pro Tachometer 8000 RPM Programmable Waterproof Black Dial White LED
Feature
- Spec.: Standard 3-3/8″ (85mm) dial for a 3-3/4″ (95mm) opening required 12-volt negative ground systems.
- FEATURES: Indicator Hour Meter Records and Displays to 99999.9 Hours & Automatic Roll Over Resolution 0.1 Hour
- Designed for 270 dial sweep in-dash
- White LED illumination, convex lens stainless bezel comes with ABS housing.
- PACKAGED: Tachometer, Wiring Harness, installation manual.
- With Waterproof , Anti-fog, and UV-resistant.
- WARRANTY: One-year for non-human factor damage & Free lifetime technical support.
6. Universal Tachometer for Diesel Alternator 2" 6000 RPM Black Dial Chrome Bezel
Feature
- SPECIFICATION: Standard 2″ (52mm) dial for a 2-1/16″ (52.4mm) opening. Tachometer suitable for diesel, “W” terminal on the alternator & requires 12 negative ground systems. Adjust the pole of number easily form gauge back.
- FEATURES: Designed for in-dash
- Swiss Stepper Movement, certification for IP67, 304 stainless steel bezel with a convex lens, white LED illumination, the dial has UV protection, easy installation (using pin-style wiring).
- PACKAGED: Power harness, Screw Bracket, O-ring, installation manual.
- WARRANTY: One-year for non-human factor damage & Free lifetime technical support.
- Made in Taiwan
7. MOTOR METER RACING Fuel Level Gauge 2" Included Sender Panel
Feature
- SPECIFICATION: Standard 2″ (52mm) dial for a 2-1/16″ (52.4mm) opening and requires 12-volt negative ground systems.
- FEATURES: Designed for 90 dial sweep in-dash
- Light bulb illumination, flat lens black bezel with plastic housing.
- PACKAGED: Fuel level sender, removable mounting panel, light bulb, U-bracket kits, installation manual.
- WARRANTY: One-year for non-human factor damage & Free lifetime technical support.
- Made in Taiwan
Description
Fuel Level Gauge includes panel and sender If you are buying this combination of products, this will be your best choice.
8. MOTOR METER RACING 6 Gauge Set Classic Instruments Electronic Speedometer Digital Odometer Black Dial
Feature
- SPECIFICATION(Speedometer & Tachometer): Standard 3-3/8″(85mm) dial for 3-3/4″(95mm) opening. Classic Gauge Set requires any 1 to 9 cylinder gas powered engine & 12-volt negative ground systems. Notice: If the vehicle does not have an ECU, please purchase the set with GPS sensor: B084ZDVGVL, otherwise, the speedometer will not operate normally.
- SPECIFICATION(Volt gauge, Oil pressure, Water temp gauge, Fuel gauge): Standard 2″ dial for 2-1/16″ opening.
- FEATURES: Designed for in-dash
- Light bulb illumination, convex lens stainless bezel comes with plastic housing. Adjust the number of cylinders easily form gauge back.
- PACKAGED: Water temp sensor (Thread size: 1/8 NPT), oil pressure sensor (Thread size: 1/8 NPT), fuel level sender, power harness, U-bracket kit, installation manual.
- WARRANTY: One-year for non-human factor damage and free lifetime technical support
- Made in Taiwan.
9. MOTOR METER RACING Electronic Fuel Level Gauge 2" LED Backlit White Amber Waterproof Pin-Style Install
Feature
- SPECIFICATION: Standard 2″ (52mm) dial for a 2-1/16″ (52.4mm) opening. Notice: Fuel Gauge requires fuel level sender: B07D3SG4RY & 12-volt negative ground systems.
- FEATURES: Designed for 270 dial sweep in-dash
- Swiss Stepper Movement, LED illumination (White & Amber), used the 304 stainless steel on the bezel, dial UV protection, certification for IP67, easy installation (using pin-style wiring).
- PACKAGED: Power harness, screw bracket, O-ring, installation manual.
- WARRANTY: One-year for non-human factor damage & Free lifetime technical support.
- Made in Taiwan
10. MOTOR METER RACING Electronic Fuel Gauge 2" Stainless Steel
Feature
- SPECIFICATION: Standard 2″ (52mm) dial for a 2-1/16″ (52.4mm) opening. Notice: Fuel Gauge requires fuel level sender: B07D3SG4RY & 12-volt negative ground systems.
- FEATURES: Designed for 90 dial sweep in-dash
- Light bulb illumination, Stainless bezel comes with a convex lens.
- PACKAGED: Screw bracket, light bulb, installation manual.
- WARRANTY: One-year for non-human factor damage & Free lifetime technical support.
- Made in Taiwan
Conclusion
By our suggestions above, we hope that you can found 52Mm Tachometer In Dash for you.Please don’t forget to share your experience by comment in this post. Thank you!