Top 10 Whirlpool Upper Senser Unit

SPECIFICATIONS
The temperature sensor measures the temperature inside the oven. If your oven is too hot, not heating evenly, is not heating enough when baking, or simply will not start, you could have a faulty temperature sensor. A faulty temperature sensor can be a fire risk. If your sensor is not working properly, you should look to replace it straight away. A failed oven sensor is most often responsible for F3 or F4 error messages on electronically-controlled ovens. Make sure you disconnect the power to your range before you start your repair.

Works with the following models:
KitchenAid: KDRP407HBU10, KDRP407HSS06, KDRP407HSS08, KDRP407HSS09, etc
Maytag: MEW7530WDS01, MEW7530WDW01, MEW7630WDB01, MEW7630WDS01, etc
Whirlpool : GBD277PDB10, GBD277PDB4, GBD277PDB5, GBD277PDB6, etc

Replaces part numbers: WPW10131825, 4455636, WPW10131825VP

Works with most top name brands: KitchenAid, Whirlpool, Jenn-Air, Maytag.

Fixes the following symptoms:
Oven is too hot
Oven not heating evenly
Element will not heat
Little to no heat when baking
Will not start
Count on our W10131825 oven temperature sensor for an unrivaled mix of durability, convenient functionality, and great value for money. Click ‘Add to Cart’ now!

The Whirlpool brand names and logos are the registered trademarks of their respective owners. Any use of the Whirlpool brand name or model designation for this product is made solely for purposes of demonstrating compatibility.

Super Exquisite and Durable Icemaker Control Board Kit

How To Test The Whirlpool Ice Maker Optic Control Boards 4389102
Diagnostics 1 : First, open the freezer door and look at the status LED on the right hand side. Make sure the ice maker control is turned “ON”. The status LED should blink twice, pause, and then repeat (blink blink…. pause. blink blink… pause).
Diagnostics 2 : Next, with the freezer door open, hold down the flapper door on the left hand side to un-block the optics beam. With the optics beam unblocked, the status LED should light up and stay on (not blink). If the status LED continues to blink twice, then you have faulty optic control boards and they will need to be replaced.
Diagnostics 3 : If there is no status LED light, then the ice maker could be in “harvest” mode. Hold down the freezer light switch, the status LED should flash every second while in harvest mode. If the LED light still does not light up, then the optic control boards will need to be replaced.

How To Replace The Whirlpool Ice Maker Optic Control Boards 4389102
Step1: First, unplug the refrigerator.Remove the three Phillips screws on the right hand side.
Step2: Disconnect the wire harness on the back side and then remove the two Phillips screws to release the receiver control board from the housing. Re-install the receiver board in the reverse order.
Step3: Next, remove the three Phillips screws on the left hand side.
Step4: Disconnect the wire harness on the top side and then remove the two Phillips screws to release the emitter control board from the housing. Re-install the emitter board in the reverse order.

Specification:
Brand: KONDUONE
Condition: 100% Brand New and never used
Package Includes:
1 x 4389102 Icemaker Sensor Control Board Kit with Instruction Manual

ROTOR SWITCH

This particular Electronic Control Board is specific to Whirlpool brands including：

Kenmore,Maytag, Magic Chef, Amana, Admiral, Estate, Inglis, KitchenAid, Roper, Crosley, Jenn-Air, Hardwick, Glenwood, and Caloric.

4389102 Refrigerator Icemaker Emitter Sensor Control Board Kit Replace Part Numbers: 

2198585, 2198586, 2220398, 2220402, 2255114, 4388635, 4389102R, AP5956767, AP3137510, 

PS557945, PS10064583, TJ4389102R, W10193666, W10193840, W10290817, W10757851.

4389102 refrigerator control board AKA w10193666 whirlpool,4389102 kenmore,w10290817 kitchen aid,whirlpool optics w10757851,whirlpool 2198588,whirlpool 2220398,whirlpool w10757851,whirlpool ap5956767,whirlpool 2255114,whirlpool 4389102.

Replacing the Electronic Control Board could solve your appliance problem as below:

symptoms:

1) The ice maker will not make ice

2) The ice maker will not stop making ice

3) The ice maker seems to have stopped working properly

How To Replace The 4389102 Ice Maker Optic Control Boards  for Whirlpool:

1): Unplug the refrigerator.Remove the three Phillips screws on the right hand side.

2): Disconnect the wire harness on the back side and then remove the two screws to release the receiver control board from the housing.

Re-install the receiver board in the reverse order.

3): Remove the three screws on the left hand side.

4): Disconnect the wire harness on the top side and then remove the two screws to release the emitter control board from the housing.

Re-install the emitter board in the reverse order.

Tips: If you are not a mechanic,we recommend you to take a photo before removing the old parts to avoid forgetting how to install new parts!

Package Includes:

1 x 4389102 Icemaker Sensor Control Board Kit with Instruction Manual

Package:
The ice maker whirlpool replacement kit includes an Emitter Board and a Receiver Board.
Compatible brand:
The refrigerator ice maker control board Kit Designed to fit specific Whirlpool manufactured refrigerator models,include:
Whirlpool，Kenmore,Maytag, Magic Chef, Amana, Admiral, Estate, Inglis, KitchenAid, Roper, Crosley, Jenn Air, Hardwick, Glenwood, and Caloric.
Replacement part Numbers:
The ice maker whirlpool replacement kit Replacement part Numbers,
 2198585 、2198586、 2198588、2220398、2220402、2255114、4388635、4389102 、4389102R、ADC9102 、AP3137510、 AP5956767 、PS557945 、PS10064583、TJ4389102R、 W10193666 、W10193840、W10290817、W10757851
The ice maker whirlpool replacement kit can solve problems:
(1) The ice maker does not make ice
(2) The ice maker does not distribute ice
(3) The ice maker won’t stop making ice
(4) The ice maker seems to have stopped working properly
Replacement and installation:
(1)Unplug the refrigerator and remove the three cross screws on the right side.
(2) Disconnect the wire harness on the back side and then remove the two screws to release the receiver control board from the housing.
(3) Re-install the receiver board in the reverse order.
(4)Remove the three screws on the left hand side.
(5) Disconnect the wire harness on the top side and then remove the two screws to release the emitter control board from the housing.
(6)Re-install the emitter board in the reverse order.
Service:
ALEW Direct always adhere to the product quality as the core, customer service as the purpose, if you have any questions or Suggestions in the process of using our products, you can contact me by email, I will give you a timely and satisfactory reply!

Product Description:
Ice maker optic board set 4389102 senses ice cube level in the ice bucket and shuts off ice production when the bucket is full. Set also prevents the ice maker from ejecting ice when you open the freezer door. Set includes emitter and receiver optic boards.

Genuine Original Equipment Manufacturer (OEM) parts! This motor rotor position sensor (part number WPW10178988) is for washers. Motor rotor position sensor WPW10178988 monitors the direction and speed of the spinning rotor and communicates this information to the electronic control board. Unplug the appliance before installing this part. Wear work gloves to protect your hands. For Whirlpool, Maytag, & Kenmore.

4389102 Refrigerator Ice Maker Sensor Control Board Kit
This part fixes the following symptoms: Ice maker not making ice ; Ice maker won’t dispense ice ; Ice maker dispenses too much ice
This part works with the following brands:Kenmore, KitchenAid, Whirlpool, Jenn-Air, Maytag, Dacor, Thermador
Part Number 4389102 replaces: ADC9102 AP3137510 PS557945 PS10064583 2220398 2220402 W10193666 W10193840 2198585 2198586 2198588 2255114 W10290817 4388635 4389102 4389102R W10757851 AP595676 PS10064583 TJ4389102R.
Fits model: 10641522500, 10644022600, KSCS25FTMS01, KSCS25FTMS02 ,KSCS25FTSS00

Please note: All brand names and logos are registered trademarks of their respective owners.This is an DIKOO Brand replacement part, NOT an OEM and not affiliated with any brands product. All mentions of brand names or model descriptions are made solely for purposes of demonstrating compatibility.
Any warranties for this product are offered solely by DIKOO , not affiliated with any warranties offered by the original manufacturers.

Package including:
1*4389102 Ice Maker Sensor Control Board Kit

Dryer hot fuseis a dryer safety device, when the dryer overheating, it can prevent current flow to the motor circuit.
279838 Heating Element  replacement for numbers 2438, 279837, 279838, 279838A,279838VP,3398064,3403585,8565582,AP3094254, W10724237.
The 3977767 Dryer Thermostat Replacement is a hi-limit thermostat with Terminal Extension Arm. It acts as as safety mechanism that keeps the dryer from overheating. Once the dryer temperature reaches 221 degrees Fahrenheit, this piece will shut down power to the heating element until it drops by 80 degrees Fahrenheit
3392519 dryer thermal fuse is used indryers as a safety mechanism that stops the flow of electricity to the motor circuit when a dryer overheats. This replacement part features two 3/16 inch terminals, and is sold individually. When this fuse is faulty, your dryer will not start or it will not heat properly. This is a one-time fuse, meaning it cannot be re-set.It must be replaced when there is no longer continuity between the terminals.
3392519  replaces part number 3388651, 3392519, 694511, 80005, WP3392519VP
Works with most top name brands:  Whirlpool, Kenmore, Roper, Maytag, Estate, Inglis,
 KitchenAid, Crosley, Amana, Admiral, Magic Chef.
Package list:
1PC 279838 Dryer Heating Element
1PC 397767 Dryer Thermostat kit
1PC 3392519 Dryer Thermal Fuse
Count on our Dryer Heating Element Kit 279838 & 3977767 & 3392519  for an
unrivaled mix of durability, convenient functionality, and great value for
money. Click ‘Add to Cart’ now!
If you are unsure our replacement part will fit your appliance model, you can ask us in Customer questions & answers section or contact us by visiting the Sumnew Tech storefront — click the Sumnew Tech on a product page to get to the storefront — then click the “Ask a question” link under Further Information. Select your reason, and then tell us about the question.