The Best What Size Circuit Breaker For Dryer

Style: 15Amp 3-wires

NOTICE:

1. Although GFCI is a rainproof device, it is very important to keep the device far away from water.

2. Please read the user manual carefully before using.

What is GFCI Replacement Plug?

1) This attachable safety GFCI Plug earth leakage protection device is widely used to replace the general PLUG 

of your power tools and home appliances, such as pressure washer, hair blower, hairdryer, vacuum cleaner, air conditioner,

 bathroom heater, aquarium, pool pump and all the Christmas cards that plug into each other. 

2) It will trip off when it detects current loss, to protect people from electric shock.

How to use?

(1) Cut off the original electrical plug and wired up this GFCI plug.

(2) Place the Hotwire under the Brass-colored screw. Place the Ground wire under the green-colored screw. 

Place the Neutral wire under the silver-colored screw.

(3) Install the strain-relief clamp (the u-shaped piece of metal) over the outer cable exterior to help prevent a pulling force 

from pulling the wires out from the screws that are supplying the electricity

(4) Test it and make sure the red indicator light is ON before using.

How to test?

(1) Power on, plug into the receptacle

(2) Press RESET button, red indicator light ON

(3) Press TEST button, red indicator light OFF

(4) Press RESET button for use.

DO NOT USE IF TEST FAILS!

Specifications:

Name: Replacement GFCI Plug 3-Prongs

Certificate: ETL

Rated Voltage: 125VAC, 60Hz

Rated Current: 15Amp

Residual Current: 5mA

Tripping Time: ≤0.1ms

Voltage Withstand: 2000V

Endurance Test Time: 6000

Limited Current: 250A

Color: Black

Testing GFCIs and afcis on a monthly basis is a good idea that is sometimes forgotten. Underwriters laboratories (UL) suggests that afci/GFCI Devices be tested every 30 days after installation to ensure they are properly working. Now the new self test & lockout feature enables the dual function circuit breaker to automatically and continuously test itself to ensure that it is working properly. If it is detected that the device has been compromised, the device trips itself and locks out the homeowner from resetting the device, reducing the possibility of the homeowner incorrectly assuming that the device was tripped to prevent a ground/arc fault. This effortless system guarantees that only the best protection is given to your home at all times.

The Combination Type AFCI differs from the Branch/Feeder AFCI in its ability to detect series arcing faults. The Branch/Feeder AFCI can only detect line-to-neutral and line-to-ground arcing faults. Combination AFCIs provide protection against the high-energy parallel (line-to-neutral and line-to-ground) arcing and low-energy series arcing. “Combination” does NOT mean an AFCI + GFCI. Combination = parallel + series arcing. Combination AFCIs protect downstream branch circuit wiring, cord sets and power supply cords. Siemens Combination Type AFCI trip indicators provide a valuable analysis tool to help electricians pinpoint the type of trip. These indicators are in the form of LEDs that appear near the handle of the breaker. The LED indications will appear for 5 seconds each time the AFCI is turned “ON” up to 30 days after the last trip.

100a double pole interchangeable circuit breaker, 2 inch wide, full size, 120/240V, for replacement main breaker or add a 100a main breaker to 125a main lug load centers, also used as branch circuit breaker, with individual upc bar code, bulk.

Product description:
It is a compact, single pole, push-to-reset thermal circuit breakers
Widely used in household and commercial appliances, transportation, marine, telecommunications, power strips, audio-visual, medical, and power supplies

Specifications:
Item Type: Push-button Thermal Circuit Breakers
Series: L1
Weight：0.25 ounces
Size: 35 x 31 x 14mm/1.38 x 1.22 x 0.55″
Voltage: 125-250V AC; 50V DC
Current: 3A -50A
Rated current: 20A
Reset type: Manual reset
Operating temperature: -10℃ (14℉)~ 60℃ (140℉)
Interrupt capacity: 1000 amps
Widely used in household and commercial appliances, transportation, marine, telecommunications, power strips, audio-visual, medical, and power supplies

Package inckuded:
1 x Manual Reset Thermal Circuit Breaker 20A
1* Hex Nut
1* Grip Nut Ring

Product Description

The Parallax ITEQ230 Double-Pole Circuit Breaker is a type QP plug-in. HACR SWD. Rated. 120/240VAC 10,000 AIC. Dimensions: 2.56″ H x 2″ W x 3″ L.

From the Manufacturer

Siemens plug in circuit breakers are intended for use in Siemens EQ, Siemens Ultimate, ITE, and Gould load centers or meter combinations. The double pole Siemens breakers may be used in 1 or 3-phase load centers and are 240V rated. To ensure the warranty on a Siemens panel is not voided, the use of Siemens breakers is required.

Product Description

Siemens offers a wide array of thermal-magnetic circuit breakers that are the key element for overload and short-circuit protection of your home’s electrical system. To provide additional protection Siemens offers circuit breakers to protect against severe electrical shock or electrocution, mitigate the risk of electrical fires and protect against damaging surges and Voltage spikes. Circuit breakers are intended for switching and protection of your home’s wiring from high temperatures caused by excess current higher than the rating of the wire. While thermal-magnetic circuit breakers are the key element for overload and short-circuit protection of your electrical system, there are potentially dangerous conditions that do not involve over current. To ensure the warranty on a Siemens panel is not voided, the use of Siemens breakers is required. Siemens strongly recommends against the use of “used” breakers. The installation of used breakers in a Siemens panel will void the warranty on the panel. Siemens does not sell used breakers and has not approved any 3rd party sellers to do so.

From the Manufacturer

Siemens plug in circuit breakers are intended for use in Siemens EQ, Siemens Ultimate, ITE, and Gould load centers or meter combinations. The double pole Siemens breakers may be used in 1 or 3-phase load centers and are 240V rated. To ensure the warranty on a Siemens panel is not voided, the use of Siemens breakers is required.

Product Description

Connecticut Electric manufactures new high quality replacement circuit breakers for Stab-Lok load centers that accept NA style circuit breakers. Circuit breakers should only be replaced with new tested and Safety Agency Listed circuit breakers, never used or refurbished ones.

From the Manufacturer

This 120/240 volt Federal Pacific Electric, 30 amp, double pole, thick series replacement circuit breaker is used in a Federal Pacific (FPE) load center. Typical applications, up to 13,200 watts, include hot water heaters, clothes dryers, air conditioners (240 Volt, up to 36,000 BTU) and electric motors (240 Volt, 1-1/2 hp to 3 hp). These are only suggested applications and cannot assure compliance with all local codes. Please check local electrical codes before starting any electrical project.

Product Description

Our biggest and best snap circuits kit yet! Give your child an exciting, hands-on introduction to electronics with Elenco electronics’ Snap circuits extreme SC-750. This kit contains over 80 color-coded, real circuit parts that snap together to create working electronic circuits and devices. Recommended for children 8 and older, this set offers over 750 do-it-yourself projects that will give your child an entertaining, concrete education on how electronics work. A computer interface option lets children view waveforms and frequencies (compatible with Windows 95 or later). create working electronic circuits snap circuits comes with over 80 parts to create over 750 different electronic projects. The parts, which include Snap wires, slide switches, resistors, an FM radio module, and a solar cell, snap together easily on the included plastic grid–no soldering required. Each part is numbered and color-coded to make identifying them easy. These snap circuits parts combine to create working circuit boards just like the ones found inside televisions, radios, and other electronic devices. View frequencies with computer interface the SC-750 kit features a to customize computer interface for use with over 50 of the projects. With the included software and pc-interface cable, your child can view waveforms and frequencies, just like an electronics engineer. How cool is that?! for projects involving the to customize computer interface, your computer will need windows 95 or later and a working microphone input port. Simple, fun projects let kids learn while they play with its easy-to-follow instructions, snap circuits gives your child a hands-on education in how electrical circuits work to run the Everyday devices that they’re familiar with. They’ll also gain valuable lessons in building and in following instructions. The project manuals include large color illustrations and simple directions for each project. The project list includes all of the projects in the SC-100, SC-300, and SC-500 kits and additional projects like a solar alarm, a rechargeable battery, and a vibration detector. With these projects, children will learn about electric switches, integrated circuits, digital circuits, fuses, and more. grow as you go– Because the projects are arranged in order of complexity, kids can build on their skills as they progress through the manual. The lessons start out with a simple electric light and switch project that demonstrates how electricity is turned on and off with a switch. Further along, kids can put together an LED flasher, a photo solar alarm, an electronic kazoo, and more. Design your own circuits and upgrade your kit once children have mastered several of the techniques introduced in this kit, They can use the Parts to experiment and create their own customized circuits and electronic devices. The snap circuits extreme SC-750 can also be upgraded to the snap-micro I Standard (SCM-400) with the purchase of a uc-100 upgrade kit. Kids will enjoy additional parts, manuals, and projects that’ll take their kit-andd their fun-too the next level. Snap circuits extreme SC-750 requires four AA batteries, which are not included. what’s in the box? Plastic snap-grid, 82 snap circuits parts, 5 Project manuals, software, and pc-interface cable.

Amazon.com

Give your child an exciting, hands-on introduction to electronics with Elenco Electronics Snap Circuits Extreme SC-750. This kit contains over 80 color-coded, real circuit components that snap together to create working electronic circuits and devices. Recommended for children 8 and older, this set offers over 750 do-it-yourself projects that will give your child an entertaining, concrete education on how electronics work. A computer interface option lets children view waveforms and frequencies (compatible with Windows 95 or later).

Create Working Electronic Circuits
Snap Circuits comes with over 80 pieces to create over 750 different electronic projects. The pieces, which include snap wires, slide switches, resistors, an FM radio module, and a solar cell, snap together easily on the included plastic grid–no soldering required. Each piece is numbered and color-coded to make identifying them easy. These components combine to create working circuit boards just like the ones found inside televisions, radios, and other electronic devices.

View Frequencies with Computer Interface
The SC-750 kit features a CI-73 computer interface for use with over 50 of the projects. With the included software and PC-interface cable, your child can view waveforms and frequencies, just like an electronics engineer.

For projects involving the CI-73 computer interface, your computer will need Windows 95 or later and a working microphone input port.

Simple, Fun Projects Let Kids Learn While They Play
With its easy-to-follow instructions, Snap Circuits gives your child a hands-on education in how electrical circuits work to run the everyday devices that they’re familiar with. They’ll also gain valuable lessons in building and in following instructions. The project manuals include large color illustrations and simple directions for each project.

The project list includes all of the projects in the SC-100, SC-300, and SC-500 kits and additional projects like a solar alarm, a rechargeable battery, and a vibration detector. With these projects, children will learn about electric switches, integrated circuits, digital circuits, fuses, and more.

Grow as You Go
Because the projects are arranged in order of complexity, kids can build on their skills as they progress through the manual. The lessons start out with a simple electric light and switch project that demonstrates how electricity is turned on and off with a switch. Further along, kids can put together an LED flasher, a photo solar alarm, an electronic kazoo, and more.

Design Your Own Circuits and Upgrade Your Kit
Once children have mastered several of the techniques introduced in this kit, they can use the components to experiment and create their own customized circuits and electronic devices. The Snap Circuits Extreme SC-750 can also be upgraded to the Snap-Micro I Standard (SCM-400) with the purchase of a UC-100 upgrade kit. Kids will enjoy additional parts, manuals, and projects that’ll take their kit–and their fun–to the next level.

Snap Circuits Extreme SC-750 requires four AA batteries, which are not included.

What’s in the Box
Plastic snap-grid, 82 electrical components, 5 project manuals, software, and PC-interface cable.

Product Description

Siemens offers a wide array of thermal-magnetic circuit breakers that are the key element for overload and short-circuit protection of your home’s electrical system. To provide additional protection Siemens offers circuit breakers to protect against severe electrical shock or electrocution, mitigate the risk of electrical fires and protect against damaging surges and Voltage spikes. Circuit breakers are intended for switching and protection of your home’s wiring from high temperatures caused by excess current higher than the rating of the wire. While thermal-magnetic circuit breakers are the key element for overload and short-circuit protection of your electrical system, there are potentially dangerous conditions that do not involve over current. To ensure the warranty on a Siemens panel is not voided, the use of Siemens breakers is required. Siemens strongly recommends against the use of “used” breakers. The installation of used breakers in a Siemens panel will void the warranty on the panel. Siemens does not sell used breakers and has not approved any 3rd party sellers to do so.

From the Manufacturer

Siemens plug in circuit breakers are intended for use in Siemens EQ, Siemens Ultimate, ITE, and Gould load centers or meter combinations. The double pole Siemens breakers may be used in 1 or 3-phase load centers and are 240V rated. To ensure the warranty on a Siemens panel is not voided, the use of Siemens breakers is required.