899 reviews analysed
1. Cen-Tec Systems 94038 TurboCat Air Turbine Tool with 35 Ft. Hose and Attachments for Central Vacuums, Gray
- Includes the popular Turbo Cat air turbine tool in the gray color with blue accent
- The gray Turbo Cat features an eleven and a half inch wide poly V driven full size agitator for superior cleaning of carpeted surfaces. The metal shroud lets the tool glide easily over carpeted surfaces and low profile gets under furnishings
- The turbine features an easy clean out feature for the turbine should large debris gain access to the turbine assembly. Easy spin needle bearings help the tool transmit the power from the air stream created by your vacuum to the agitator
- Includes a premium chrome steel telescopic wand with Cen-Tec’s trademarked Button Down feature making it easy to disengage the wand from your hose for above the floor cleaning
- The Chrome wand extends from its fully collapsed length of 24” to a fully extended length of 39” at one-inch intervals. The wand is easy to install into the turbine and accommodates all of the included accessories for above the floor use
- The 35 foot crush proof low voltage hose for convenient control of your central vacuum at the 360 degree swiveling easy to grip hose handle. The hose end is designed to work with the most popular industry standard inlet valves featuring two pin low volt control contacts
- Ideal for use with all major brands of central vacuums including Beam, NuEra, Husky, ProLux, Vacumaid, Vacuflo, Canavac, Eureka, Cyclovac, Nutone, Honeywell, MD, Wal vac, Galaxie, and Imperium
- Features a 12” soft gray floor brush with a generous natural fill making it ideal for use on all hard floor surfaces including hardwood, laminate, stone, tile, vinyl, and parquet
- Also included in the package is a premium soft natural fill dusting tool, 13” fluted and beveled crevice to prevent sealing off on upholstery, and a soft 5” wide upholstery tool with brush strip to groom upholstery capturing pet dander and hair, as well as normal household dust
The 94038 is designed for new and replacement requirements for a superior air turbine floor nozzle for cleaning carpeted surfaces accompanied by the tool necessary for safe cleaning of hard floor surfaces and all above the floor cleaning needs. The 35 foot crush proof low voltage hose permits control of the central vacuum from the hose handle. The Italian made chrome steel telescopic wand is designed for the wand diameter to increase as it extends from floor to hose insuring maximum airflow. The premium cleaning accessories are ideal for cleaning hard surfaces, soft upholstery, and into tight spaces and can be carried along with you on a convenient wand mounted tool clip. The 94038 is ideal for use with all major brands of central vacuums including Beam, NuEra, Husky, ProLux, Vacumaid, Vacuflo, Canavac, Eureka, Cyclovac, Nutone, Honeywell, MD, Wal Vac, Galaxie, and Imperium.
2. Cen-Tec Systems 91353 Central Vacuum Hose, 40 Ft, Light Gray
- 1.375” x 40 foot pearl gray central vacuum hose designed to fit industry typical wall inlet valves and provide for on off control of your central vacuum from the hose handle
- Has a 360 degree swivel handle with a comfortable grip providing single handle control of the hose and vacuum tools in a comfortable compact design
- The hose carcass is lightweight and crush proof to making it easier to vacuum and reducing fatigue. The hose is highly flexible and has a soft surface with rounded corrugations to avoid damage to household furnishings without the need for a hose sock
- Compatible with all major brands of central vacuum including eureka, beam, electrolux, vacuumed, canavac, hoover, cyclovac, husky, vacuflo inlets with pin jack inlets, m+s, md, imperium, honeywell, and most regional brands
- The eva body and pearl gray color will not mark walls, floors, or furnishings and the 40 foot length is longer than the industry standard 30 feet to make it easy to reach to the corners of the room even when furnishing are present
- The wall end design fits industry standard wall inlets equipped with low voltage contacts inside the valve opening. The split contacts in the wall end provide simple circuit through to the handle switch for turning your central vacuum power unit on and off at the working end of the hose
- Total control hose provides on and off control of the vacuum at the handle
- The 91353 is a low voltage hose, so it is not compatible with electric power nozzles
3. Cen-Tec Systems 93367 Central Vacuum Attachment Kit Gray
- Features a commercial grade 1.25X 35 foot vacuum hose with the trademarked arc relax strain relief to increase hose life by preventing kinking
- Includes a premium Gray rug and hard floor combination tool with wheels to insure easy movement on carpeted surfaces and area rugs
- Includes a white hose hanger with a unique non-slip blade to keep the hose on the hanger
- Compatible with all major central vacuum brands including, beam, electrolux, eureka, vacuflo, vacumaid, md, aerus, cyclovac, canavac, honeywell, vacuflo, and imperium
- The hose features a smooth interior for superior airflow and the soft Gray color assure the hose to be non-marking
The 93367 is designed to complement all major central vacuum systems and is an ideal set of accessories for those concerned about black tools marking surfaces. The 1.25 inch inner diameter commercial grade vacuum hose is highly flexible with a smooth interior for superior airflow. Cen-Tec’s trademarked arc relax strain relief system covers the last 14 inches of each end of the hose and prevents kinking increasing hose life. The premium combination nozzle has a wheel system, metal base plate, and pivoting swivel neck that keeps the tool parallel to the surface of the floor for superior vacuuming. A five-piece accessory set with natural fill dusting and natural fill upholstery tool is ideal for all above the floor surfaces. The 93367 is lightweight, making it ideal for cleaning above the floor surfaces, stair risers, while reducing fatigue. The 93367 is designed to be compatible with all major central vacuum brands including: Beam, Electrolux, Eureka, Vacumaid, Vacuflo, MD, Cyclovac, Canavac, Honeywell, Galaxie, Imperium, and Nutone installed with valves that have approximately a 1.50 inch industry standard opening.
4. LifeSupplyUSA 35 ft Central Vacuum Knitted Hose Cover 35ft with Application Tube
- !!! PLEASE CHECK SIZE !!! WE HAVE OTHER LISTINGS WITH OTHER SIZES !!!
- Protects Floors, Walls and Furniture, Machine Washable and Durable
- Compatible with VACSOCK, VACUFLO, ELECTROLUX, AERUS, ALLEGRO, BEAM, VACSOC, AIRVAC, MD, VACUMAID, HAYDEN, DIRT DEVIL, NUTONE, HONEYWELL, AND ALSO POOL VACUUM HOSES!
- Compatible with ALL BRANDS OF CENTRAL VACUUM HOSES
- Brand New Individually Sealed
5. Cen-Tec Systems 93730 Central Vacuum Garage Attachment Kit with 30 ft. Hose, Black
- Includes a 30 foot crush proof commercial grade vacuum hose featuring the Cen-Tec exclusive arc relax strain relief that helps preserve hose life by reducing kinking and sharp bends at the wall valve and working end of the hose
- Features a four piece premium accessory set including a 30 degree soft grip handle, 13” wide mouth paddle crevice, paint brush soft dusting tool, and an upholstery tool that is ideal for lifting matted carpet and releasing stuck on dirt from floor mats, trucks, and upholstery. An extra natural fill dusting tool is included for gentle cleaning of cloth upholstery
- The upholstery tool is designed to mimic the commercial car wash tool with a wide throat to pick up large and non-uniform debris
- Designed to fit close to the 360 degree swivel end on the hose to make cleaning easier to control the tools when working in confined space. The swivel feature allows the tools to be positioned for maximum effectiveness
- Includes two plastic extension wands and a 12” natural fill floor brush allowing you to not only clean the car but also tidy up around the garage
- Contains a handy hose hanger and caddy bag for holding all the tools when not in use. We recommend hanging the hose at close to eye level which reduces the need to tightly coil the hose
- Compatible with all major brands of central vacuums including Beam, Electrolux, Eureka, Canavac, Vacuflo, Vacumaid, Nutone, M&S, Honeywell, MD, Galaxie, Imperium, and Cyclovac
- The 30 foot, 1.25″ diameter crush proof commercial grade hose will last for years, even in harsh high use environments
The 93730 is designed to use your central vacuum system in the garage or work shop for fast effective clean-up. The Cen-Tec exclusive tool set was designed with the unique cleaning requirements associated with detailing cars, boats, and RV’s. The tool set is set at a unique 30 degree angle not the typical 45 degree to relax your wrist and reduce the effort that comes from trying to position the tool at the proper angle for effective cleaning. The nylon fill dusting tool is paint brush soft with extra long fill to reach into the louvers on your car dash, the deep corner when the dash meets the windshield and down into the deep pockets on the door panels. A second dusting tool is ideal for grooming upholstery and open, hard surfaces. The upholstery tool feature can be angled down for gentle cleaning or angled up to engage aggressive teeth for raising matted carpet or releasing stuck on dirt that dries and grabs the carpet surface. The two extension wands a 12” natural fill floor brush extends the use of the 93730 to floors and walls great for capturing cobwebs or saw dust. The 30 foot crush proof commercial grade hose will last for years, even in harsh high use environments. The 93730 is compatible with all major brands of central vacuums including Beam, Electrolux, Eureka, Canavac, Vacuflo, Vacumaid, Nutone, M&S, Honeywell, MD, Galaxie, Imperium, and Cyclovac.
6. Cen-Tec Systems 94093 35 Ft. Low Voltage Central Vacuum Installed Hose Sock, Light Gray
- 1.375” x 35 foot pearl gray central vacuum hose designed to fit industry typical wall inlet valves and provide for on off control of your central vacuum from the hose handle
- Has a 360 degree swivel handle with a comfortable grip providing single handle control of the hose and vacuum tools in a comfortable compact design
- The hose carcass is lightweight and crush proof to making it easier to vacuum and reducing fatigue
- Compatible with all major brands of central vacuum including eureka, beam, electrolux, vacumaid, canavac, hoover, cyclovac, husky, vacuflo inlets with pin jack inlets, m + s, md, imperium, and most regional brands
- The eva body and pearl gray color will not mark walls, floors, or furnishings and the 35 foot length is longer than the industry standard 30 feet to make it easy to reach to the corners of the room even when furnishing are present
- The wall end design fits industry standard wall inlets equipped with low voltage contacts inside the valve opening. The split contacts in the wall end provide a simple circuit through to the handle switch for turning your central vacuum power unit on and off at the working end of the hose
- Low voltage hose, so it is not compatible with electric power nozzles
- The locking stub tube is ideal for insuring the wand stays in place, avoiding unintended separation
- Features an installed soft cotton lycra blend hose sock which smooths the surface of the hose to prevent damage to base boards, door jambs, and fine furnishings in the home. The sock is treated with an anti-microbial to protect your home environment
- Hose is made in the USA
7. 30ft Central Vacuum Low Voltage On/Off Hose
Crushproof, lightweight, 360-degree swivel, 30-foot central vacuum hose with on/off switch for the suction. A great central vacuum cleaner replacement hose for everyone who uses an air driven non-electric power brush such as all models of TurboCat and other small air-driven brushes. Compatible with vacuum wall valves with two small low voltage metal contacts inside the 1.5 inch (or so) diameter hole. Use with Chrome Extension Tube Wands. ATTN VACUFLO: The hose end doesn’t have two metal valve pins
8. 35′ "Comet" Central Vacuum Kit with Hose, Power Head & Tools – Works with All Brands of Central Vacuum Units
- Light gray 35ft 1 3/8″ inside diameter electric crushproof hose (27% more airflow than 1 1/4″ inside diameter hose) with a 3-way switch and a soft grip ergonomic handle.
- Light gray colored “Comet” power head.
- Comes complete with a 4 piece tool kit (12″ Floor brush, crevice tool, upholstery tool and duster), telescopic wand for use with floor brush, red dust mop, caddy bag, wand tool caddy attachment, hose hanger and wall holder
- Compatible with any standard 1.5 inch inside diameter wall inlet valves. Please measure your inlet valve to ensure compatibility. Your choice of either a pigtail or direct connect hose configuration. Please notify us of your choice after purchase.
- Not compatible with the Vacuflo proprietary inlet valve (HP Vacuflo Series 4940, 4949, 4940, 4941) . If you are unsure of compatibility, please message Alder Products Ltd.
Electric Hose – Compatible with any 1.5″ wall inlet valve – 1 3/8″ inside diameter crush-proof lightweight hose with button lock handle with a 3-way control switch – 360 degree swivel handle – New handle design with a soft grip – Strain relief helps maintain consistent suction by preventing kinks in the hose at the handleElectric Power Head – Durable drive/geared belt – Electronic reset button to protect motor; motor will instantly stop if the brush roller is jammed – Headlight for improved viewing angle – Sealed ball bearings for no hair build-up Brush roller viewing window – On/Off foot pedal switch button – Non-marking wheels – Great edge cleaning – Protective bumper to protect baseboards and furniture – 13 inch cleaning path Tools/Accessories – Mesh attachment caddy bag – Steel ratchet wand – Set of cord management button lock wands with cord clips – 4 piece tool kit (12″ Floor brush, crevice tool, upholstery tools and duster) – Wand tool caddy attachment – Hose hanger – Wand holder – Red dust mop
9. 30′ Deluxe Central Vacuum Accessory kit
- 30′ Plastiflex 3-way switch, Crush proof Hose (Direct plug adaptor included)
- Sweep and Groom power head with metal brush roll
- 2 sets of wand (including a telescopic wand)
- all premium tools and floor brush w/natural bristols
- Fits all central vacuums, Beam, Eureka, Electrolux, MD, Vacu maid, Cyclo vac and etc
This is the most popular central vacuum attachment kit on the market. The 3-way switch control allows you to turn on/off the unit and the power head. 2 sets of wands helps for quick replacement of tools and attachments. all tools are none marking and have natural bristols. The hose has a power cord attached from a manufacturer and it includes the Direct connect plug and instructions on how to change it.
10. 30ft Low Voltage On/Off Hose with Button Lock
- Button-lock Stub. Color may vary: light or dark grey
- 30′ light weight, crush-proff hose with 360 degree Swivel Hose Handle with on/off switch.
- Attn VACUFLO USERS: This hose is NOT compatible with the 2-pin wall valves.
- Fits Standard 1.5 inch Wall Inlet Valve
- Free Technical Support, Call 929.800.2980
<p>- Button- lock Stub. Color may vary: light or dark grey- 30′ light weight, crush- proff hose with 360 degree Swivel Hose Handle with on/off switch.- Attn VACUFLO USERS: This hose is NOT compatible with the 2- pin wall valves.- Fits Standard 1.5 inch Wall Inlet Valve- Free Technical Support, Call 929.800.2980</p>
By our suggestions above, we hope that you can found Vacuflow Central Vacuum 60 Ft Hose Sock for you.Please don’t forget to share your experience by comment in this post. Thank you!