Nowadays, there are so many products of temp control for kegerator in the market and you are wondering to choose a best one.You have searched for temp control for kegerator in many merchants, compared about products prices & reviews before deciding to buy them.
You are in RIGHT PLACE.
Here are some of best sellings temp control for kegerator which we would like to recommend with high customer review ratings to guide you on quality & popularity of each items.
813 reviews analysed
1. Inkbird Pre-Wired Dual Stage Digital Temperature Controller Outlet Thermostat 110V, 1100W Heating and Cooling Multi-purpose Controllers for Aquaria, Reptile Keeping, and Brewing Fermentation Kegerator
Feature
- Simple to use: plug it in, set the temp ranges, place the probe, plug in the heater/cooler into the marked outlet.
- Be able to connect with refrigeration and heating equipment at the same time.
- Easily calibrated.
- Can display in Centigrade or Fahrenheit.
- Whether you need temperature control for fermentation, greenhouse, kombucha control or to set up your temperature project system, the ITC-308 temperature controller is a great choice.
Description
Features:
Temperature Control Range : -50~99 °C / -58~210 ° F
Temperature Resolution: 0.1 ° C / 0.1° F Temperature
Accuracy: ±1°C (-50 ~ 70°C) / ±1°F (-50 ~ 160° F)
Temperature Control Mode :On/Off Control, Heating and Cooling
Input Power: 100 ~240VAC, 50Hz/60Hz
Temperature Control Output: Max. 10A, 100V ~240V AC
Dimension Body: 140x68x33mm (5.5×2.7×1.3inch)
Socket: 85x42x24mm(3.3×1.7x1inch)
Sensor Length: 2m / 6.56ft
Input Power Cable Length: 1.5m (5ft)
Output Power Cable Length: 30cm (1ft)
Buzzer Alarm: High and Low Temperature Alarm
Temperature calibration
Over-temperature and sensor fault alarm
Heating/Cooling differential function could be set separately for refrigeration and heating to protect temperature controller from violent change.
Sensor Type: NTC sensor (Including)
Ambient Temperature: -30~ 75 ° C / -22~ 167 ° F
Storage Temperature: -20~ 60 ° C / -4~ 140 ° F
Humidity 20~85% (No Condensate)
Warranty: 1 Year
It has certificate of EMC, LVD, RoHS, FCC compliance.
Package Content:
1x Temperature controller ITC308
1x Manual
2. Inkbird ITC-308 Digital Temperature Controller Outletsmoker Thermostat, 2-Stage, 1100W, with Sensor Reptile Beer Brewing Kegs Fridge Cured Meat Breeding
Feature
- Plug and play design, easy to use
- Dual relay output, be able to connect with refrigeration and heating equipment at the same time
- Support reading with Centigrade or Fahrenheit unit
- Maximum output load: 1100W(110V)
- Dual display window, be able to display measured temperature and set temperature at the same time
3. Inkbird All-Purpose Digital Temperature Controller Fahrenheit &Centigrade Thermostat w Sensor 2 Relays ITC-1000
4. Johnson Controls A421ABG-02C A421 Series Electronic Temperature Control with Pre Wired Power Cord, -40 to 212 Degree F Temperature Range
Feature
- Electronic Single Stage Temperature Control, 120/240 VAC, UL TYPE 1, IP20, SPDT, with 12 amp power c
- Featuresa lockable front-panel touchpad for setup and adjustment, and a Liquid Crystal Display (LCD)
- Replaces the popular A419 Johnson Control model with upgraded technology.
- The A421 controls provide heating or cooling control, sensor offset, temperature setback, adjustable
- In stock – Ships FAST!
Description
The Johnson Control’s A421 digital temperature controller is great for the brewers kegerator or keezer. You can use this to keep your beer or wine at exactly the temperature you like it. Excellent for fermenting lagers as well. The A421 Series controls are single stage, electronic temperature controls with a single-pole, double-throw (SPDT) output relay. The controls feature an adjustable backlit LCD for viewing the temperature and status of other functions, and a three-button touchpad for setup and adjustment. An LED indicates the On/Off status of the output relay. The A421 control is 120 VAC. The A421 controls provide heating or cooling control, sensor offset, temperature setback, adjustable anti-short cycle delay, and a restricted user adjustment mode. The temperature units can be displayed in °F or °C. The temperature adjustment range is -40 to 212°F or -40 to 100°C. The A421 automatically changes from heating and cooling.
5. Inkbird ITC-308 Max.1200W Heater, Cool Device Temperature Controller, Carboy, Homebrew, Fermenter, Greenhouse Terrarium Temp. Control
Feature
- [Convenient Design] Plug and play design, easy to use. Support °C/°F display.
- [Dual Relay Output] Be able to connect with refrigeration and heating equipment at the same time.
- [Dual Display Window] Be able to display measured temperature and set temperature at the same time.
- [Buzzer Alarm] High and low temperature alarms are available when the temperature is over or the sensor is with issue.
- [Warranty & Safe] Warranty: 1 year. Maximum output load: 1100W(110V). It is with temperature calibration and compressor delay which can protect your refrigeration.
Description
Specification:
Temperature Control Range: -50~99°C / -58~210°F
Temperature Resolution: 0.1°C / 0.1°F Temperature Accuracy: ±1°C (-50~70°C) / ±1°F (-50~160°F)
Temperature Control Mode :On/Off Control, Heating and Cooling
Input Power: 100 ~240VAC, 50Hz/60Hz
Temperature Control Output: Max. 10A, 100V~240V AC
Buzzer Alarm: High and Low Temperature Alarm
Sensor Type: NTC sensor (Including)
Sensor Length: 2m / 6.56ft
Input Power Cable Length: 1.5m (5ft)
Output Power Cable Length: 30cm (1ft)
Body Dimension: 140x68x33mm (5.5×2.7×1.3inch)
Socket Dimension: 85x42x24mm (3.3×1.7x1inch)
Ambient Temperature: -30~75°C / -22~167°F
Storage Temperature: -20~60°C / -4~140°F
Humidity: 20~85% (No Condensate)
Warranty: 1 Year
Package Included:
1x ITC-308 Temperature Controller
1x Manual
6. Titan Controls High Temperature Shut-Off Controller w/ Delay, Single Outlet, 120V – Zephyr 2
Description
Controller turns off your lights if high temperature exceeds set point. Built in 1 – 30 minute ‘hot start’ delay with ‘HOLD’ feature. 6 foot temperature probe is accurate to within 2Degree F. Protects your garden & keeps your plants safe. Plastic enclosure protects internal components from dust and moisture. 15 Amps/120 Volts/60 Hz. 3 year warranty.
7. Inkbird Combination Temperature and Humidity Controller ITC-608T Digital Pre-wired Outlet Humidistat Thermostat, 120V 15A 1800W, 12 Period Time Dual Stage w/Sensor
Feature
- 1.√US ETL Certificate Listed and Warranty. ITC-608T thermostat temperature and humidity controller is ETL listed, and rigorously tested for quality control and safety. The unit itself has 2 years warranty. (The temperature and humidity sensor have 1 year warranty.)
- 2.√Three in one Multifunction Temperature and Humidity Control Mode with Dual Relay Output. ITC-608T can work as a temperature controller, a humidity controller, a temperature and humidity controller. First, only plug temperature sensor with cooling and heating equipment. Second, only plug humidity sensor with humidifier and dehumidifier equipment. Third, plug both temperature and humidity sensor with cooling/heating and humidifier/dehumidifier equipment.
- 3.√Supporting calibration, compressor delay and saving reset setting values. Centigrade or Fahrenheit degree display, easy to set, PV and SV dual display windows. And with compressor delay for protecting cooling device. ITC-608T can save the original setting values in case accidentally power-off.
- 4.√More power up to 1800W. Temperature control range is -40-212°F(-40-100℃), humidity display range is 5 -99.0%RH. Max Loading: 120V 15A 1800W. Temperature senor is waterproof while humidity sensor is not.
- 5.√Multifunction usage. Temperature and humidity controller ITC-608T can be used in home brewing (refrigerator), fermenting, Greenhouse, terrarium, reptile, planting (mushroom), meat storage and cooking.
Description
Main features:
*Plug and play design, easy to use, can control temperature and humidity at the same time
* Dual relay output, be able to connect with refrigeration and heating equipment at the same time; be able to connect with humidifier and dehumidifier equipment at the same time; be able to connect with refrigeration/ heating and humidifier/dehumidifier equipment at the same time
* Support reading with Centigrade or Fahrenheit unit
* Maximum output load: 1800W (120V, 15A)
*Dual display window, be able to display measured temperature/humidity and set temperature/humidity at the same time
* Supporting Temperature and humidity calibration
* Compressor delay protection for refrigeration control
* High and low temperature/humidity alarms are available
* Over-temperature/humidity and sensor fault alarm
* Heating/Cooling differential function could be set separately for refrigeration and heating to protect temperature controller from violent change. Same as humidity control
* Support setting 12 different temperatures in 12 different time period
Specification:
Maximum output load:120Vac, 60Hz, 15A, 1800W
Temperature measurement range:-40℃~100℃/-40℉~212℉
Temperature display accuracy:0.1℃/℉(<100℃ )="">
Relative humidity measurement range:5~99%RH
Humidity display accuracy:0.1%RH
Display unit:temperature:Celsius °C or Fahrenheit °F;humidity:%RH
Ambient temperature:-20℃~60℃/-4℉~140℉
Storage environment:temperature:0℃~60℃/32℉~140℉;humidity:20~80%RH(Unfrozen or condensation state )
Temperature sensor cable Length: 2m(78.74in)
Humidity sensor cable Length: 2m(78.74in)
Input Power Cable Length: 1.5m(59.05in)
Unit Dimension: 20.8cm*8.5cm*3.5cm(8.19*3.35*1.38in)
Warranty: 2 year
Package Content:
1x ITC-608T temperature and humidity controller;
1x Temperature sensor
1x humidity sensor
1x Manual
8. Inkbird ITC-1000 Dual Stage Digital Temperature Controller Fahrenheit & Celsius Thermostat with Sensor for 3D Printer,Freezer,Fridge,Hatching ect (110 Volt)
Description
Fahrenheit and Celsius Display Can Be Choose
Temperature Calibrating, Refrigerating control output delay protection
Control the Temperature by Setting the Temperature Set Value and the Difference Value
Alarm When Temperature Exceeds the Limit or When Sensor Error
2 Relays, Switch Between Cooling and Heating Modes
Technical Parameter:
Output: 2 Relays
Temperature Measuring Range: -50~210 oF / -50 oC-99 oC
Resolution: 0.1 oF / 0.1 oC
Accuracy: ±1 oF(-50 oF -160 oF)/ ±1 oC(-50 oC -70 oC) Power Supply: 110VAC 50Hz/60Hz
Power Consumption: 3W
Sensor: NTC Sensor
Relay Contact Capacity: Cooling (10A/250VAC)/ Heating (10A/250VAC);
Ambient Temperature: 0 oC-60 oC
Storage Temperature: -30 oC-75 oC
Relative Humidity: 20-85% (No Condensate)
Package Content:
1x Temperature controller ITC 1000 110V
1x 7.87″ SENSOR
1x Muanal
9. hOmeLabs Beverage Refrigerator and Cooler – 120 Can Mini Fridge with Glass Door for Soda Beer or Wine – Small Drink Dispenser Machine for Office or Bar with Adjustable Removable Shelves
Feature
- MODERN ELECTRIC BEVERAGE COOLER – This 3.2 cubic feet, free standing beverage refrigerator features an elegant see through, left hinge glass front door with a stainless steel frame for you to view your wine, beer or soda at a glance. Its blue LED interior light illuminates for easy, nighttime selection of your favorite chilled drink
- LARGE CAPACITY BEER & WINE CHILLER – Under counter beverage cooler with large, internal storage design is equipped with 3 adjustable and removable chrome shelves. It’s an organizer that conveniently holds up to 120 standard sized soda, water, and beer cans or up to 60 bottles of white or red wine at just the right humidity
- ADVANCED TEMPERATURE CONTROLS – Single zone beverage mini refrigerator has an easy touch temperature control that cools down to 33°F, and large digital display for quick monitoring and setting of any temperature. Its memory function automatically restores the preset temperature of the cooler in case it becomes unplugged, or in the event of a power outage
- POWERFUL COOLING SYSTEM – Our 120V 240W heavy duty, vertical chiller features energy efficient advanced technology, and a whisper quiet compressor that works with a small convection fan to cool quickly, and keep consistent air circulation for a uniform temperature supply inside. Perfect for an office, dorm, apartment, RV, restaurant, home kitchen and more
- AUTO DEFROSTING FUNCTION – Beverage cooler is also designed with an additional temperature sensor for auto defrost mode. External size: 18.87” W (front across) x 33.25” H (top to bottom) x 17.30” D (front to back). Internal size: 16” W x 29” H x 12” D. NOTE: Images show EXTERNAL Dimensions rounded UP to nearest decimal
Conclusion
By our suggestions above, we hope that you can found Temp Control For Kegerator for you.Please don’t forget to share your experience by comment in this post. Thank you!