We spent many hours on research to finding plastic vs brass pex fittings, reading product features, product specifications for this guide. For those of you who wish to the best plastic vs brass pex fittings, you should not miss this article. plastic vs brass pex fittings coming in a variety of types but also different price range. The following is the top 10 plastic vs brass pex fittings by our suggestions
909 reviews analysed
1. SharkBite UC248LFA10 1/2" 90 Degree Elbow PEX Barb Fitting (10-Pack), Brass
Feature
- ELBOWS: SharkBite fitting 1/2 inch 90 degree Elbow connects PEX Pipe in water distribution and hydronic heating systems.
- AFFORDABLE: Low cost solution to connect PEX Pipe Tubing
- COMPATABLE PRODUCT: Use with SharkBite PEX Clamp tool and stainless steel clamp rings, or PEX Crimp tool and copper rings. The SharkBite connection system is perfect for your next commercial or homeowner plumbing project.
- LEAD FREE: All SharkBite brass fittings are made of Lead Free DZR brass for a durable fitting that is also corrosion resistant
- QUALITY: Only SharkBite’s quality and performance is field-proven with more than 550 million connections. SharkBite is the only push-to-connect brand than can ensure a clean, leak-free connection
Description
10 Pack, 1/2″, Lead Free Brass Barb Insert Elbow, For Connecting 2 Pieces Of 1/2″ Cross Link Polyethylene Pex Tubing, Secure Barb Ends Of Fittings To Pex Pipe With TV #608-933 Cinch Clamps and TV #608-743 Cinch Tool, Or Copper Crimp Rings and Crimp Tool, Immediately Testable To Well Over 100 PSI, Meets The New NSF/ANSI Standard 14-2009 and ASTM F 1807-9SI Standard For Products Intended For The Transport Of Potable Water, ANSI/NSF Standard 61 Annex G For Lead Free Compliance and The Wetted Surface Of This Product Contacted By Consumable Water Contains Less Than 0.25% Of Lead By Weight To Meet AB1953 California and VT S152 Vermont Low Lead Restrictions.
2. Cambridge Pex Cinch Rings 1/2 Inch, Open Diameter 17.5 mm, 100 Pcs, 304 Stainless Steel
Feature
- Premium quality NSF PW rated pex cinch ring clamps recommended for all forms of flexible and inflexible thin walled hoses.
- 304 Stainless Steel 1/2 Inch, 17.5mm open diameter,
- Specialized tongue-in-groove design which provide a full 360º seal.
- 100 pc contractor size packaging. Recommended for outdoor or indoor use.
- Cambridge performance driven and high quality products are preferred by industry leaders in the Electrical, HVAC, Automotive Aftermarket, Plumbing and Home Improvement Markets.
3. PROCURU 1/2-Inch PushFit Coupling – Push-to-Connect Plumbing Fitting for Copper, PEX, CPVC, Lead Free Certified (0.5 Inch (1/2"), 10-Pack)
Feature
- SIZE & TYPE: 1/2″ x 1/2″ Straight Coupling (Pack of 10)
- LIFETIME WARRANTY: Designed and manufactured by the “Gold Standard” of Push-Fit Fittings
- PLUMBING MADE EASY: No need for installation tools, glue, or soldering! Simply push to connect pipe made of COPPER, PEX, PVC. Need to change out or remove after installation? The Procuru Disconnect Clip Tool makes it a breeze.
- PUSH-TO-CONNECT PIPE: Easiest and fastest way to join copper, CPVC, or PEX pipe. No need for installation tools, glue, or soldering! Simply push to connect pipe.
- HIGHEST STANDARDS OF QUALITY: Certified & Compliant UPC, CSA, ANSI/NSF-61, ASSE.
Description
PROCURU Push-Fit Fitting provides super easy, safe, and trouble-free solution to joining pipe of various materials including Copper, PEX, and PVC. No installation tools is necessary: NO solder, NO torch, NO wrench, NO glue! Meets and exceeds the latest plumbing and building codes, PROCURU Push-Fit is specified and recommended by the industry’s leading experts. 1/2″ PushFit Coupling, Pack of 10.
4. (30) 1/2" POLY ALLOY PEX FITTINGS 10 EA-ELBOW, COUPLER, TEE
Description
– NSF Certified to NSF 14 and NSF/ANSI 61
– Compatible with any brand of PEX manufactured to North American standard
– Manufactured to ASTM Standard F877 and ASTM F2159 for use with any SDR-9 PEX piping
– Manufactured to CSA B137.5
– Compliant with AB1953 (No Lead / Lead Free laws) in the USA
– Compatible with: Crimp and Cinch Ring Fitting Systems, PEX-A, PEX-B, PEX-C
– NOT Compatible with: Expander Fitting System, Uponor/Wirsbo Expander System
5. MIDLINE VALVE 800Q056-4-L Full Port PEX Barb Ball Valve Water Shut Off, 3/4", Brass
Feature
- High quality: constructed of lead free (dzr) Brass for superior reliability and strength
- Easy to use: fittings work with crimp ring or clamp connection methods
- Heavy duty: forged Brass valve pressure is rated 150 psi wsp for steam and 600 psi woc for water, oil and gas
- Style: full port chrome plated Brass ball with pex size 3/4 inch connections on both ends
- Nsf, upc and csa approved, manufactured to astm standard F1807
Description
The lead free full port PEX ball valve feature 3/4 inch connections for PEX tubing on both ends and is useful for heavy duty commercial and residential applications. Typical uses include domestic hot cold water systems and natural gas. The valve is operated with a chrome plated Brass handle covered with a vinyl grip. The handle lever makes a 90 degree quarter turns by opening or closing A valve. The construction of heavy duty forged Brass valve pressure is rated 150 psi for steam and 600 psi for water, oil and gas (wog). this lead free product has been rated nsf-61-g by UPC standards.
6. HM Digital DM-1 In-Line Dual TDS Monitor, 0-9990 ppm Range, +/- 2% Readout Accuracy
Feature
- plastic
- Imported
- The DM-1 helps you to measure the tap water coming in vs the purified water going out of your water filtration system at any time
- The In-Line Dual TDS Meter displays TDS levels of the feed water and product water with in and out electrode probes
- This TDS Monitor is highly efficient and accurate due to its advanced microprocessor technology
- Highly efficient and accurate due to its advanced microprocessor technology
- Auto-Off function conserves battery power. The unit shuts off automatically after 10 minutes of non-use
- Installs quickly and easily
Description
Product Description
Product Description: How Pure is Your Water? HM Digital’s DM-1 is a dual inline monitor that measures TDS from 0 to 9990 ppm. It includes batteries, two sensors and two 1/4″ quick-connect T-fittings. The DM-1 is an easy and convenient method of determining TDS levels for water filtration/purification systems such as reverse osmosis (RO), deionization (DI) and more. It’s very useful for coolers or under-the-sink systems. For any type of system that removes TDS, you can install the ‘IN’ sensor on your tap water (before the system) and the ‘OUT’ sensor on your product water (after your filtration system) to determine the filter/membrane’s effective operating (rejection) rate.
From the Manufacturer
In-Line Dual TDS Monitor.
7. SUPPLY GIANT QYMO0012-10 X PEX 90 Degree Elbow Barb Pipe Fitting, 1/2 Inch, Brass (pack of 10)
Feature
- HIGH QUALITY: Constructed of lead free (DZR) brass for superior reliability and strength
- EASY TO USE: Fittings Work with Crimp Ring or Clamp Connection Methods
- Barb x barb x barb connection for PEX plumbing systems, Rated to 200°F and 200 PSI
- Compatible with PEX pipe size 1/2 pack of 10
- NSF, UPC and CSA approved, Manufactured to ASTM standard F1807
Description
The Pexflow PEX Barb Elbow (10-Pack) is an easy to install, low cost solution to connect PEX Pipe. Pexflow PEX Barb fittings are compatible for potable water distribution and hydronic heating applications. These PEX fittings may be used with the stainless steel clamp system or the copper crimp ring system (both sold separately). The Pexflow PEX Barb fitting range offers a wide variety of Fittings, Manifolds, Valves, clamp rings, crimp rings and tools in various sizes to help complete your next plumbing project.
8. SUPPLY GIANT QYUF0034-10 X PEX Barb Tee Pipe Fittings, 1/2", Brass
Feature
- HIGH QUALITY: Constructed of lead free (DZR) brass for superior reliability and strength
- EASY TO USE: Fittings Work with Crimp Ring or Clamp Connection Methods
- Barb x barb x barb connection for PEX plumbing systems, Rated to 200°F and 200 PSI
- Compatible with PEX pipe size 1/2 pack of 10
- NSF, UPC and CSA approved, Manufactured to ASTM standard F1808
Description
The Pexflow PEX Barb Tee (10-Pack) is an easy to install, low cost solution to connect PEX Pipe. Pexflow PEX Barb fittings are compatible for potable water distribution and hydronic heating applications. These PEX fittings may be used with the stainless steel clamp system or the copper crimp ring system (both sold separately). The Pexflow PEX Barb fitting range offers a wide variety of Fittings, Manifolds, Valves, clamp rings, crimp rings and tools in various sizes to help complete your next plumbing project.
9. SharkBite UC526LFA10 1/2" Female Swivel x PEX Barb Fitting Adapter (10-Pack), Tan
Feature
- INSTALLS IN SECONDS: No soldering or glue
- Just crimp to create a watertight seal
- VERSATILE: SharkBite plumbing fittings fit copper, CPVC, CTS, and PEX pipe and connect all 4 types in any combination
- LEAD-FREE: Made of high-quality forged DZR brass that is lead-free
- HIGH QUALITY: SharkBite’s quality and performance is field-proven with more than 550 million connections
- SharkBite is the only push-to-connect brand that can ensure clean, leak-free connections
- CERTIFIED: SharkBite fittings are certified to 200 PSI and 200 degrees Fahrenheit and can be reused up to 4 times
Description
CUT. PUSH. DONE. The SharkBite PEX barb swivel Adapter is an easy to install solution to connect PEX tubing to a male threaded connection. SharkBite barbed fittings can be used are suitable for potable water distribution and hydronic heating applications. The SharkBite Connection System makes any plumbing project fast and easy thanks to unique push-to-connect technology. When you insert a pipe into a SharkBite quick-connect fitting, the fitting’s stainless-steel teeth bite down and grip the pipe, while its special O-ring compresses to create a watertight seal. No soldering, no clamps, no glue. SharkBite products work with your existing plumbing, are easy to disassemble for changing and reusing fittings, and can be rotated for installation in tight spaces. Whether you need to repair a broken pipe or plumb a whole house, SharkBite provides a push-to-connect solution and leak-free results.
10. Oetiker 3/4-inch Stainless Steel PEX Cinch Clamp Rings For PEX Tubing Pipes, 50-pack
Feature
- 3/4-Inch stainless steel cinch clamps with PEXGrip Technology
- Connect PEX to crimp type fittings in hard to reach spaces
- Just Pinch the tab closed with a PEX tool to make the connection
- Interlocking ring that forms a complete 360-Degree watertight seal around PEX Tubing
- Made in The USA – ASTM F877/F2098
Description
Oetiker QSOET crimp ring is made of stainless steel for enhanced durability. Ring has a nominal size of 3/4 inch and is suitable for hot as well as cold water plumbing applications. Crimp ring has PEX end style for precise operation. Ring with 0.031 Inch wall thickness has 0.917 Inch ID for convectors. PEX cinch clamps are used for connecting PEX tubing to brass or poly fittings, especially in hard-to-reach spaces. Stainless steel cinch clamps feature an easy-to-use tab design, so there is no need to get a tool around the entire fitting. Simply press the tab closed with a cinch tool and the connection is complete. The cinch clamp design provides a positive mechanical connection, ensuring the PEX tubing is evenly compressed against the full circumference of the fitting. This is a pack of 50 rings.
Conclusion
By our suggestions above, we hope that you can found Plastic Vs Brass Pex Fittings for you.Please don’t forget to share your experience by comment in this post. Thank you!