Finding your suitable readers for periscope dryer vent duct is not easy. You may need consider between hundred or thousand products from many store. In this article, we make a short list of the best readers for periscope dryer vent duct including detail information and customer reviews. Let’s find out which is your favorite one.
984 reviews analysed
1. Whirlpool 4396037RP 0-to-18 Inch Vent Periscope
This periscope can range from 0 to 18 Inch depending on preference. It includes one male snap-lock fitting and one extra long draw-band collar. Keep in mind that any excess length can be trimmed to fit according to your needs.
From the Manufacturer
This periscope can range from 0 to 18 inches depending on preference. It includes one male snap-lock fitting and one extra long draw-band collar. Keep in mind that any excess length can be trimmed to fit according to your needs.
2. Builder’s Best 010149 Adjustable Dryer Vent Periscope, 0" to 5", 6" Length, 2" ID, Aluminum
- 0 to 5-inch telescoping rigid dryer vent for overlapping or very close outlets
- Only requires 2 1/2 inches of clearance between the wall and the dryer
- 2″ x 6″ rigid aluminum with smooth interior decreases air friction
- draw-band collar for dryer connection
- Crimped fitting for wall connection
- Recommended by dryer manufacturers
- Made in the USA out of 100 percent aluminum
- Overall length of periscope is 12″, 0-5″ measurement is from center to center of the collars.
This 010149 Zero Periscope is specifically designed for use in situations where the dryer Outlet overlaps or is very close to the wall Outlet. The 2 inch by 6 inch smooth aluminum construction telescopes to handle outlets up to 5 inches distance from center to center. The 4 inch diameter draw band collar synchs down over the clothes dryer vent i.e.. The 4 inch diameter crimped fitting slides into most wall ies. Once installed, it needs only 2.5 inches clearance behind the dryer. If your outlets are very close and you need to move the dryer closer to the wall, this vent maintains critical airflow and provides all metal performance. Clothes dryer manufacturers specify “only rigid or flexible metal vent shall be used for exhausting. Do not use plastic or metal foil vent.” installation instructions are included inside each carton. The zero periscope is built in the USA by Builder’s Best, Inc.
3. Whirlpool 4396014 29-Inch to 50-Inch Vent Periscope
4. Whirlpool 4396011RP 18-to-29-Inch Vent Periscope
- Adjustable dryer vent (18 to 29 inches)
- Includes a male snap-lock fitting and extra long draw-band collar for easy installation
- 2-1/2 inch clearance telescoping sections with beveled ends eliminate interference with floors and side walls
- Sections separate for easier connection
- Excess length can be trimmed to fit
This Dryer Telescoping Vent Periscope measures 18-in L to 29-in L and is designed for use in small laundry spaces with 2-1/2-in clearance. It features one male snap-lock fitting and one extra long draw-band collar for easy installation; excess length can be trimmed to fit. The beveled ends of the item prevent interference with or damage to floors and wall. This is an accessory that can be used across several brands; check to see if your model number is compatible. Installing this accessory will require basic hand tools and novice repair experience.
From the Manufacturer
This periscope can range from 18 to 29 inches depending on preference. It includes one male snap-lock fitting and one extra long draw-band collar. Keep in mind that any excess length can be trimmed to fit according to your needs.
5. Whirlpool 4392892 29-Inch to 77-Inch in the Wall Vent Periscope
DRYER VENT PERISCOPE FROM 29″ TO 77″ WITH 2 1/2″ WALL CLEARANCE. WHIRLPOOL
From the Manufacturer
This item is designed to fit between the studs inside the wall. It does a great job of carrying the exhaust air through the top plate and into attic/floor space. You should use the 4″ aluminum vent to complete the run to the outside. This dryer vent rough-in system has (3) 2-1/2″ clearance telescoping sections that extend from 29″ to 77″. It also has one male snap-lock fitting, one female snap-lock collar and mounting strap, as well as all-metal rigid construction that meets most in-wall codes.
6. Whirlpool 8171587RP Dryer Exhaust Periscope Kit
- This product is a Factory Certified Accessory. These three words represent quality parts and accessories designed specifically for your appliance. Time tested engineering that meets our strict quality specifications
- Package contains (1) Dryer Exhaust Periscope Kit
- Multi screwdriver needed for installation
- This part is a replacement for the following part numbers: W1083349, 8171587
- This product is a universal accessory item compatible with several brands
7. Lambro 3005 Dryer Vent Tite Fit, 90 Degree 18" to 30"
Dryer Vent Tite Fit, 90 Degree 18″ to 30″
8. Deflecto 4" Oval Duct, Adjustable from 27" to 48" (DAF2)
- 27″ x 48″ adjustable oval duct
- Made with sturdy, aluminum metal
- Allows dryer installation as little as 3″ from the wall
- Pipe can conveniently be cut to shorter lengths
- Prevents duct from being smashed behind dryer
- Aluminum material
- Allows for vertical, horizontal or diagonal installation in tight spaces
- 4 inch oval duct
- Adjusts from 27 in. to 48 in. long
- Fire Resistant
This fire resistant, aluminum oval duct by Deflecto is adjustable and can be cut to shorter lengths. Allowing dryer venting installation as little as 3″ from the wall, it can be installed vertically, horizontally, or diagonally. Made with sturdy metal that prevents the duct from smashing behind the dryer. Skinny ducts are ideal for venting your dryer safely and accurately in closed spaces such as closets. Deflecto keeps you in mind for a better venting and installation experience.
9. Dryer Venting. Offset Elbow, Dryer
By our suggestions above, we hope that you can found Periscope Dryer Vent Duct for you.Please don’t forget to share your experience by comment in this post. Thank you!