The Best Miracle Weld

HighHeat is a hand mixable epoxy putty stick specifically formulated to bond and repair materials that will be exposed to high temperatures in automotive and industrial maintenance applications. It cures to a tough, hard bond with little to no shrinkage. This industrial-strength product outperforms conventional epoxy putties at high temperatures and sets in 1 hour at room temperature. After 8 hours, it can be drilled, tapped, machined, ground, filed and painted. HighHeat is rated at a tensile strength of 800 PSI and cures to a machine grey in color. It is able to withstand continuous heat exposure of 400ºF and intermittent heat exposure to 550ºF

Gorilla Super Glue Gel, 20 g, Clear

J-B Weld is The Original Cold Weld two-part epoxy system that provides strong, lasting repairs to metal and multiple surfaces. Mixed at a ratio of 1:1, it forms a permanent bond and can be shaped, tapped, filed, sanded and drilled after curing. At room temperature, J-B Weld sets in 4-6 hours to a dark grey color. A full cure is reached in 15-24 hours. J-B Weld has a tensile strength of 3960 PSI and sets to a hard bond overnight. It can withstand temperatures up to 550ºF when fully cured.

WaterWeld will plug or seal leaks and patch holes and cracks in almost anything. Ideal for repairing plumbing, fuel tanks, tub and shower, drains, pool and spa, boats and potable water tanks; setup occurs even under water. After curing, it can be drilled, tapped, filed, sanded and painted. WaterWeld has a set time of 15-25 minutes and sets hard in one hour. WaterWeld cures to an off-white color, is rated at a tensile strength of 900 PSI and will withstand temperatures up to 300ºF.

Product Description

PC-7 is the tough job epoxy. This paste epoxy was formulated for maximum bonding power. When mixed, components A (grey) and B (black) reacts to form a bond of tremendous strength. PC-7 formulation provides extended working time, for large and critical jobs, which allow the user to reposition work or make changes. High “wet grab” or tack of PC-7 Paste Epoxy makes overhead and sidewall work easy without drip or sag. PC-7 demonstrates excellent chemical resistance to mild acids, caustics, detergents, gasoline, fuel oil, salt, and fresh water. Approximately equal amounts of A and B by volume; variations of either component as high as 20 percent will not affect the bond strength. When desirable, one part of A to two parts B may be used to increase elasticity (expansion joints, etc.). In cold or cool temperatures, place PC-7 container near heat prior to using. PC-7 mixes and spreads easier at 80 degree F than at 40 degree F. Any clean smooth flat surface is an excellent surface for mixing and working. A small putty knife or flexible artist spatula are great tools for mixing and applying PC-7. Use with as adhesive: wood, metal (all types), glass, brick, block, rubber, concrete, stone, slate, fiberglass, tile, and more in any and all combinations; as sealant: oil, gas, water tanks, cellar cracks, pressure tanks, and plumbing leaks; as a filler: holes, castings, patterns, molds, voids, welds, steering wheels and much more. Work time (70 degree F): 60 minutes. Tack free cure time: 160 minutes. Cure for service: 24 hours. Maximum cure: 7 day. Gardner impact resistance: 160 in./Lb. Conduction (electric): non conductive. Excellent thermal shock. Non toxic once cured. Heat range: -20 to 200 degree F.

From the Manufacturer

PC-Products, celebrating 60 years of “Fixing Your Things”, with quality, reliable repair products. Repair solutions for just about anything that needs repair or what you can manage to break. From Concrete to Wood restoration and heavy duty permanent repairs, we have you covered.Yeah; We can fix that!

Gorilla super glue gel is an easy-to-use, thicker and more controlled formula great for multiple surfaces and vertical applications. Developed for long-lasting repairs in an instant, the clear glue Dries in 10–45 seconds. This super glue gel is specially formulated to absorb drops, impacts and shocks. Super glue, also referred to as cyanoacrylate glue, or CA glue, works on a variety of materials, including plastic, metal, fabric, stone, ceramic, paper, rubber and more. It’s Gorilla tough, every time. Not recommended for use on polyethylene or polypropylene plastic. For high performance and usability, the adhesive needs to be protected from air. Gorilla super glue gel should not be used for intentional contact with the skin. Click on the Gorilla link at the top of this page to see other quality products from the Gorilla glue company.

Product Description

PC Concrete epoxy gel is an anchoring and concrete repair product. PC Concrete has exceptional strength, maximum field reliability, along with a high heat deflection temperature of 134 degree F, which provides engineers and contractors with a choice for specifying and setting adhesive anchors in elevated temperature environments. PC Concrete out performs all caulks and hydraulic cement. PC Concrete will not come loose from any cleaned concrete surface. PC Concrete the best solution for permanent concrete repair. PC Concrete is a two component (1:1 ratio), 100 percent solids, high modulus, and structural epoxy gel. It is a solvent free, no odor, high strength, moisture-insensitive epoxy. In addition, PC Concrete has a long working time (20 minutes at 75 degree F), while providing a bolt down/paint time in as little as 4 hours. PC-Concrete has been tested in accordance with the ICC-AC58 Acceptance criteria for adhesive anchors in concrete and masonry elements. PC-Concrete is recognized for the following uses: static loads, seismic / wind loading, long term creep at elevated temperatures, static loading at elevated temperatures, damp holes, freeze thaw conditions, critical and minimum edge and spacing distances. Used as adhesive for wood, metal (all types), glass, brick, block, rubber, concrete, stone, slate, fiberglass, tile, and more in any and all combinations. Color (component a): White. Color (component B): Dark gray. Color (mixed): Concrete gray. Work time (70 degree F): 20 minutes. Cure for service: 4 Hours. Elongation: 1.9 percent. Conduction (electric): Non conductive. Thermal shock: Excellent. Toxicity: Non toxic once cured. Heat range: -20 to 115 degree F. Compressive strength: 10990 psi yield. Compressive modulus: 214,180 psi. Tensile strength: 6790 psi. Heat deflection: 134 degree F 7 day. Bond strength: 1100 psi (2 day), 1640 psi (7 day). Consistency: Non-sag paste. Water Absorption: 0.40 percent. Shrinkage: 0.003.

From the Manufacturer

PC-Products, celebrating 60 years of “Fixing Your Things”, with quality, reliable repair products. Repair solutions for just about anything that needs repair or what you can manage to break. From Concrete to Wood restoration and heavy duty permanent repairs, we have you covered.Yeah; We can fix that!

POR-15 Rust Preventive Coating is the Only Product that REALLY Stops Rust Permanently! POR-15 Rust Preventive Coating is designed for application directly on prepped rusted, sandblasted, and seasoned metal surfaces. It dries to a rock-hard, non-porous finish that won’t chip, crack, or peel, and it prevents rust from recurring by protecting metal from further exposure to moisture. POR-15 Rust Preventive Coating is sensitive to UV light and must be top coated when prolonged exposure to sunlight is possible. Top coating is not required for areas not exposed to sunlight.