Finding your suitable readers for lowes gas dryer installation kit is not easy. You may need consider between hundred or thousand products from many store. In this article, we make a short list of the best readers for lowes gas dryer installation kit including detail information and customer reviews. Let’s find out which is your favorite one.
804 reviews analysed
1. BrassCraft CSSD114R-72 X Gas Appliance Connector
Feature
- 3/8 In. ID (1/2 In. OD) x 72 In. corrugated stainless steel with corrosion resistant coating
- Safety+PLUS Excess Flow Valve helps protect against gas fires and explosions – 3/8 In. Female Flare or 1/2 In. MIP connection to gas supply or gas ball valve
- Approved for indoor and outdoor use. 100% Leak Tested
- Use with natural, manufactured, mixed and liquefied petroleum (LP or propane) gases and LP gas-air mixtures
- CSA certified. Designed, machined & assembled in the USA
Description
BrassCraft’s 3/8 In. Female Flare (1/2 In. MIP) EFV x 1/2 In. MIP x 72 In. Safety+PLUS Gas Appliance Connector is 1/2 In. OD (3/8 In. ID) with a maximum operating capacity of 49,100 BTU’s. This Safety+PLUS gas connector combines excess flow technology with the advanced corrosion resistance of ProCoat, to provide a safer gas connector for home and family. In the event of a gas line rupture or disconnect, the Safety+PLUS valve restricts gas flow at the appliance to a non-hazardous level. This immediate action helps avert the potential for a dangerous release of gas into the home. BrassCraft’s stainless steel gas connector is protected with a proprietary polymer coating designed to withstand prolonged exposure to harsh household cleaning, plumbing repair and masonry products. ProCoat coating is applied to the corrugated stainless steel connector using advanced powder-coat technology. Unlike conventional dipped or sprayed coatings, the ProCoat coating is baked directly on the connector surface at high temperatures to provide a uniform coating over the entire length of the connector. The coating is applied only after the connector has been 100% leak tested, prior to nut and fitting assembly. This process results in the most complete corrosion resistance available.
2. Deflecto Dryer Kit Vent Kit, Clothes Dryer Transition Duct, 4" x 8′, White (SK8WFW)
Feature
- 4″ diameter clothes dryer transition duct
- Includes supurr vent louvered vent hood with pipe and collar, supurr-flex UL listed clothes dryer transititon duct and two 4″ plastic clamps
- Fire resistant, flexible and easy to install
- Durable, weather resistant hood
- Supurr-vent hood louvers operate quietly for maximum exhaust air flow and seals when not in operation to help prevent back drafts
- Kit Includes
- Hood, Pipe, Collar, 8-Feet Ul Listed 2158a Duct and Clamps
- Deflector
Description
Product Description
KIT INCLUDES; HOOD, PIPE, COLLAR, 8-FT UL LISTED 2158A DUCT & CLAMPS
From the Manufacturer
Deflector SK8WFW 8-Feet Super-flex Dryer Vent Kit.
3. Supplying Demand 279838 Heating Element & Fuse 3392519 3977393 With Dryer Thermostats 3387134 3977767 5 Piece Kit Compatible with Whirlpool
Feature
- 5 piece Kit : Includes (1) 279838, (1) 3392519, (1) 3387134, (1) 3977767, (1) 3977393
- Compatible with Whirlpool brands which include some Kenmore models and Maytag models
- The heating element is rated at 5400 Watts 240 Volts. Easy to install as only requires removal of back of dryer, 2 screws and easy to plug in 5/16 terminals.
- Alternate part numbers include 3398064, 3403585, 8565582, AH334313, AP3094254, EA334313, PS334313
- Service Tip: Make sure to unplug unit before servicing.
4. Ultra Durable Stacking Kit for Samsung Washer & Dryer – 27" Front Load Laundry SKK-7A
Feature
- ✅ Stacking Kit for 27″ Samsung Front Load Washers & Dryers Compatible with SKK-7A and SK-5A
- ✅ Easily stack washer and dryer to increase usable space in your laundry room
- ✅ Non-OEM replacement Stacking Kit for Samsung Washer & Dryer – Guaranteed Quality
- ✅ Premium Quality: We utilize premium, highly durable materials guaranteed to exceed OEM specifications
- ✅ LAP Guarantee: For any reason you’re not completely satisfied, you are welcome to return the product for a full refund, no questions asked
Description
SPECIFICATIONS
Compatible with 27″ Front Load Samsung Washer and Dryers
Part Numbers: SKK-7A and SK-5A
If you are unsure our replacement part will fit your appliance model, we are happy to help! Please let us know (1) your model number and (2) the item in question via the following link:
https://www.amazon.com/ss/help/contact/?_encoding=UTF8&marketplaceID=ATVPDKIKX0DER&ref_=v_sp_contact_seller&sellerID=A1DJ19X7QQXXQ9
Whirlpool, Samsung, General Electric, Frigidaire, Kenmore, Sears, Maytag, KitchenAid brand names and logos are the registered trademarks of their respective owners. Any use of the above brand name or model designation for this product is made solely for purposes of demonstrating compatibility.
5. BuilderS Best Inc. 110108 4 Inch Dryer Vent Close Clearance Elbow
Description
4 Inch close clearance elbow dryer vent. Use the close clearance elbow whenever possible. It will make a 90-degree turn in only 4.5in. WARNING: This product can expose you to chemicals which is [are] known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
6. Stanbroil One Stop Gas Appliance Hook Up Kit – Brass Gas Ball Valve and Flexible Gas Connector w/Fittings
Feature
- Highly durable, easy to install and use for most gas appliances
- 1/2″ OD x 3/8″ ID, 22″ stainless steel flexible gas connector with 1/2″ Female Flare on both end
- Brass Shut-off valve 1/2 female NPT x 1/2 Male Flare
- 3 different couplings,1/2″ male Flare x 1/2″ NPT, 1/2″ male flare x 3/8″ male NPT, 1/2″ male flare x 3/8″ female NPT
- CSA certified
Description
Along with everything needed for installing most gas appliances
On/off valve provides easy servicing of appliances or summer shutdown
5 Pieces kit includes: 22″ stainless flexible gas connector
1/2″female flare at both ends
1/2″ male Flare x 1/2″ NPT
1/2″ male flare x 3/8″ male NPT
1/2″ male flare x 3/8″ female NPT
Brass shut-off valve with 1/2″ female NPT x 1/2″ male flare
Fit for gas logs, garage heaters, gas stoves and wall mounted heaters
7. BUILDERS BEST 111718 Elbow Kit, 4-inch by 8-foot, Silver
Description
This dryer vent kit includes parts necessary to connect a dryer to the wall vent. This kit includes a flexible 8 ft. Pipe and a close elbow with two metal clamps. The air flow of this dryer vent kit allows for enhanced drying time of the connected dryer.
8. BrassCraft CSSL45R-72 P Safety PLUS Gas Appliance Connector with 3/8" OD EFV and 1/2" MIP x 1/2" FIP x 72"
Feature
- 1/4 In. ID (3/8 In. OD) x 72 In. corrugated stainless steel connector with corrosion resistant coating
- Safety+PLUS Excess Flow Valve helps protect against gas fires and explosions – 1/2 In. MIP connection to gas supply or gas ball valve
- Approved for indoor and outdoor use. 100% Leak Tested
- Use with natural, manufactured, mixed and liquefied petroleum (LP or propane) gases and LP gas-air mixtures
- CSA certified. Designed, machined & assembled in the USA
9. BRASS CRAFT CSSD54-60 ProCoat Stainless Steel Straight Gas Connector with Fittings, 1/2" x 60" L
Feature
- Manufactured in China
- Easy to use
- Highly durable
- Corrosion Resistant Coating Protects From Exposure To Harsh Cleaning and Plumbing Repair Products
- Stainless Steel Construction
- Ranges, Water Heaters and Cooktops Up To 53,200 Btu
- 100-Percent Leak Tested
- Approved For Lp (propane) and Natural Gas
Description
Product Description
SD Series, 60″, Pro-Coat Epoxy Coated, Stainless Steel, Gas Appliance Connector, 3/8″ I.D. x 1/2″ O.D. Tube, 1/2″ Female Pipe Thread x 1/2″ Male Pipe Thread, Product Comes in Re-Sealable Zip lock Bags, AGA Approved & IAS Design Certified For Indoor/Outdoor Use, Recommended For Forced Air Heaters, Gas Ranges, Furnaces, & Water Heaters.
From the Manufacturer
Brasscraft CSSD54-60 Gas Dryer and Water Heater Flex-Lines .
10. LASCO 10-1215 Flexible Coated Gas Appliance Supply Line, 72-Inch, 3/8-Inch OD Connector with 1/2-Inch MIP X 1/2-Inch FIP Fittings
Description
Product Description
LASCO 10-1215 LASCO 10-1215 Flexible Coated Gas Appliance Supply Line, 72-Inch, 3/8-Inch OD Connector with 1/2-Inch MIP X 1/2-Inch FIP Fittings. For indoor or outdoor use. Yellow safty coating – corrugated stainless steel. For use with natural gas or propane. Connect to gas dryers! Larsen Supply a third generation family owned and operated company with over 80 years of experience has the largest retail plumbing line in the industry today with over 7000 packaged and 16,000 bulk SKU’s. We pride ourselves on service, selection and support! All Lasco merchandise if warranted to be free of manufacturing defects. Please revert to retail place of purchase for resolution of any possible plumbing questions, warranty or defective part replacement.
From the Manufacturer
LASCO 10-1215 Flexible Gas Dryer Connector Line, 3/8-Inch Diameter with 1/2-Inch Fittings, 72-Inch Long. 3/8-Inch X 72-Inch Gas Appliance Connector, Flexible Stainless Steel, Safety Coating, 1/2-Inch Pipe Thread Ends. Indoor or outdoor use. Yellow Safety Coated. Corrugated Stainless Steel. For Use With Natural Gas or Propane. To Connect Gas Dryers.
Conclusion
By our suggestions above, we hope that you can found Lowes Gas Dryer Installation Kit for you.Please don’t forget to share your experience by comment in this post. Thank you!