We spent many hours on research to finding lambro ind 289w dryer vent closure, reading product features, product specifications for this guide. For those of you who wish to the best lambro ind 289w dryer vent closure, you should not miss this article. lambro ind 289w dryer vent closure coming in a variety of types but also different price range. The following is the top 10 lambro ind 289w dryer vent closure by our suggestions
527 reviews analysed
1. Lambro Ind. 289W Dryer Vent Closure, Model: Lambro Ind. 289W Dryer Vent Closure, Tools & Outdoor Store
2. Lambro 289W Dryer Vent Seal, 4"
3. Lambro 289W Dryer Vent Seal
4. LAMBRO Industries 4" HD Galv Dryer Hood
Description
LAMBRO INDUSTRIES dryer vent hood is made with an energy efficient air tight construction and weighted damper preventing costly back draft and heat loss. Features a painted hood, heavy duty design and galvanized finish for durable, long lasting use. Product measure 4”.
5. Heartland Natural Energy Saving Dryer Vent Closure – Outside Dryer Vent Cover Adapts to Outdoor Siding
Feature
- HIGH QUALITY VENTILATION – The Heartland Natural Vent will last throughout all seasons, letting warm air escape when open and preventing cold air from entering when closed.
- PEST PROTECTION – Additionally, this vent will provide critter protection, keeping insects and other pests from entering your home through the dryer vent.
- EASY-TO-INSTALL – Replace your old vent with the Heartland Natural Vent in less than 30 min. Features a square base with pre-drilled holes, It must be installed in a vertical position. It can be mounted to brick, masonite, and press board.
- EXTRA SAVINGS – Looking for some savings? This energy saving dryer vent closure is designed to get the job done effectively and efficiently. Do your wallet a favor with the Heartland Natural Vent.
- SPECIFICATIONS – This dryer vent cover is 13.2 x 7.4 x 6.7 inches in size and weighs 1.8 pounds.
6. BetterVent Indoor Dryer Vent Kit – Protect Indoor Air Quality and Save Energy with a Superior Dryer Lint Filter (Electric Dryers Only)
Feature
- INDOOR DRYER VENT LINT TRAP – Double filter system captures lint and dust for healthier indoor environment. The stainless steel screen acts as a pre-filter capturing large lint particles, pet hair, etc. and can be cleaned with a sweeping motion of the hand. The polyester filter will capture the finer lint dust and can be vacuumed clean for extended use or replaced when fully loaded with lint. Compatible with electric dryers only.
- SAVE ENERGY – Clothes dry faster, saving time and energy. Savings increase in colder months by returning warm dryer air into the room.
- NO WATER NEEDED – This patented double filter system does not use water, eliminating messy cleanups.
- SAFETY ALERT FEATURE – There is a patent pending Safety Vent Flap designed to open, as a reminder to clean the screen and filter. This is a great solution for renters or homeowners concerned with dryer lines that exceed the dryer manufacturer’s recommendations, resulting in inefficient operation and lint accumulation.
- MADE IN USA – Manufactured in the United States of America. All installation hardware included.
Description
This indoor dryer vent is designed to capture the lint from your electric clothes dryer, for those unable to vent to the outside. All types of indoor dryer vents will allow heat and humidity into the room. We recommend the user allow for air circulation and ventilation when operated in confined spaces. This patented double filter system does not use water, eliminating messy cleanups. The stainless steel screen acts as a pre-filter capturing large lint particles, pet hair, etc. and can be cleaned with a sweeping motion of the hand. The polyester filter will capture the finer lint dust and can be vacuumed clean for extended use or replaced when fully loaded with lint. Replacement filters are available in packages of 6, lasting most users up to a year under normal conditions. There is a patent pending “safety vent flap” designed to open, as a reminder to clean the screen and filter. For renters or homeowners concerned with dryer lines that exceed the dryer manufacturer’s recommendations, resulting in inefficient operation and lint accumulation, this is a great solution. Saves energy in colder months by returning warm dryer air into the room. All installation hardware included. Customer supplies hose and clamps. Installation is quick and easy, instructions included. If you’ve purchased this product in the last 30 days and one or both of the side clips is broken, please reach out to [email protected] for a replacement.
7. Whirlpool 4396006RW Venting Close Elbow
Description
Product Description
This Dura Safe Close Elbow effectively turns 90 degrees within 4-1/2 Inch. It features snap-lock fittings and rotating collars. It is an ideal product for limited space installations.
From the Manufacturer
This DuraSafe Close Elbow effectively turns 90 degrees within 4-1/2 inches. It features snap-lock fittings and rotating collars. It is an ideal product for limited space installations.
8. Deflecto Supurr-Vent Louvered Outdoor Dryer Vent Cover, 4 Inches Hood, White (HS4W/18)
Feature
- 4″ (10.2cm) diameter vent opening
- 6″ x 6″ total unit size
- Helps keep wind, rain and snow from entering outdoor dryer vents
- Dryer vent cover is easy to install and opens with ease for maximum exhaust flow
- Features curved louvers for quieter operation
- Durable and weather-resistant with UV inhibitor added to hood to prevent sun damage and cracking
Description
The Deflecto Supurr-Vent Louvered Dryer Vent Hood Cover helps keep wind, rain and snow from entering outdoor dryer vents. The vent cover is easy to install and features curved louvers for quieter operation. Opens with ease for maximum exhaust flow, and it is durable and weather-resistant with UV inhibitor added to hood to prevent sun damage and cracking.
9. Lambro 60601 Dryer Vent Hood
Description
Product Description
Labor’s 4″ Plastic Vent Hood is used in dryer and exhaust venting systems. The aluminum ducting is fire resistant and its wide mouth opening allows for better airflow. Seal joints with approved duct mastic sealants and tapes.
From the Manufacturer
Lambro’s 4″ Plastic Vent Hood is used in dryer and exhaust venting systems. The aluminum ducting is fire resistant and its wide mouth opening allows for better airflow. Seal joints with approved duct mastic sealants and tapes.
10. Lambro 289W Four (4) Inch Paintable Dryer Vent Seal Keeps Out Unwanted Elements
Description
This dryer vent seal from Lambro replaces conventional dryer vent hoods. The floating shuttle is designed to remain closed unless the dryer is in use. A positive seal keeps cold or hot air out as well as unwanted pests. It is made of white ABS plastic and can be painted to match any home.
Conclusion
By our suggestions above, we hope that you can found Lambro Ind 289W Dryer Vent Closure for you.Please don’t forget to share your experience by comment in this post. Thank you!
