Finding your suitable readers for kegerator conversion kit perth is not easy. You may need consider between hundred or thousand products from many store. In this article, we make a short list of the best readers for kegerator conversion kit perth including detail information and customer reviews. Let’s find out which is your favorite one.
816 reviews analysed
1. Kegco D4743DT-SS Double Tap SS Draft Beer Kegerator Tower – 3" Diameter
Feature
- Kegco Quality 304 Stainless Steel Beer Tower with Two Chrome Faucets
- 3″ Diameter Premium Quality 304 Stainless Steel Column
- Used with Air Cooled Beer Dispensing Systems
- Two Kegco Chrome-Plated Brass Faucets Installed
- Two 5′ Lengths of 3/16″ Clear Beer Tubing with Nozzle and Hex Nut Assemblies
Description
This is a Polished Stainless Steel Single Column, Double Faucet, 3″ Diameter Draft Tower. This tower comes complete with two chrome-plated beer faucets and two separate 5″ lengths of 3/16″ clear beer tubing with nozzle and hex nut assemblies. It will connect to all standard keg couplers.
2. Dual Beer Tower Dispenser – Draft Kegerator Tower Beer Dispenser Kit with 2 Faucet Tap Handles & Caps, Hose, Keg Wrench
Feature
- DOUBLE YOUR POURING POWER: Limiting yourself and your guests to pouring one beer on tap at your in-home bar is time consuming and frustrating
- The G. Francis Double Tap Draft Beer Tower is a beer faucets accessory that will double your pouring power and give your bar the finished feel you have been longing for
- USE YOUR EQUIPMENT: Inside lined with foam sheet for cooled tower systems insulation
- Tower stands 13.25 inches (33.7cm) tall (not including 3.1-inch/7.9cm tall tap handles) and has a 3-inch (7.6cm) diameter and 4.5-inch (11.4cm) base diameter
- 2.75-inch (7cm) center-to-center mounting hole distance (fits standard 3-inch/7.6cm hole pattern)
- Includes 2 separate 5-foot (1.5m) lengths of 3/16-inch (4mm) inside diameter (ID) (7/16-inch / 11mm OD) clear beer tubing with a 4.5-foot (1.4m) reach
- BUILT TO LAST: Constructed from polished silver stainless steel hardware and components, hard plastic faucet knob tap handles, and soft rubber faucet cap sanitary covers for maximum strength and longevity that resists rust and corrosion while preventing scratches and other damage
- Transparent hose is FDA approved 21CFR 175.300 PVC
- KEEP OUT CONTAMINANTS: Black faucet cap sanitary covers are the most simple and effective way to keep the faucets clean and are an essential part of draft faucet hygiene as it protects the faucets from insects and bacteria that could otherwise make their way into the spout of the faucet and into your drink
- Faucets (tap handles) are threaded and removable for easy cleaning and sanitizing
- PACKAGE CONTENTS: This beer faucet accessories package includes (1) double tap draft beer tower, (2) beverage tap flow control faucets, (2) faucet covers, (4) mounting hardware bolts, (1) tower gasket, (2) hose drink tubes, hose clamps, and a multi-purpose keg faucet wrench for your convenience
- Keg couplers required, not included
3. Kegco Basic Kegerator Draft Beer Conversion Kit – BCK-NT
Feature
- CHROME BEER FAUCET WITH BRASS LEVER: Featuring a forged brass body and a highly polished chrome finish, this NSF-approved Kegco CFBL beer faucet puts a stylish finishing touch on your kegerator. The brass shaft assembly and lever includes a non-stick ball washer for smooth operation, and the lever has standard threading that is compatible with most branded tap handles. This faucet comes complete with a durable ABS plastic faucet knob with a sleek and glossy black finish.
- 4-1/8″ LONG SHANK WITH NIPPLE ASSEMBLY: The 4-1/8″ long forged brass beer shank features a black flange on the front and a compression ring on the back, making it easy to secure the shank to a mounting surface to attach beer line to your faucet. The shank comes fitted with a tail piece for connecting to 3/16″ I.D. beer line.
- 5 FOOT LENGTH OF 5/16 INCH I.D. BLUE AIR LINE: This brewery-approved thermoplastic vinyl beverage hose not only meets but exceeds all of the rigid demands for beer dispensing systems. The blue 5/16″ I.D. beer line remains flexible and durable at recommended temperatures and pressures, is unaffected by normal cleaning compounds, and will not rot, swell, or dry out.
- 5 FEET OF CLEAR BEER LINE WITH HEXNUT ASSEMBLY: This clear 5/16″ I.D. thermoplastic vinyl beer hose reliably meets all of the demands for beer dispensing systems. It remains flexible and durable at recommended temperatures and pressures, is unaffected by normal cleaning compounds, and will not rot, swell, or dry out. Included is 1 plastic snap clamp with a reusable design and a coupling assembly of 1 stepless clamp, 1 3/16″ hose nipple/tail piece, and hex nut coupling nut.
- INCLUDES METAL BEER FAUCET WRENCH: This beer faucet spanner wrench is an essential tool that allows you to quickly and confidently loosen or tighten shank collars without scratching your faucets. This wrench has been built to last with a rugged all-metal construction and a convenient 5-1/4″ length.
4. DOUBLE TAP DRAFT BEER TOWER – 2-TAP BEER COLUMN 13” HIGH 3” DIAMETER – STAINLESS STEEL BODY WITH UNIQUE BLACK SATIN FINISH – CHROME FINISH FAUCETS – BEERGON BT-1000
Feature
- TIRED OF THE SAME LOOKING BEER TOWER? BEERGON DOUBLE TAP DRAFT COLUMN is made of premium stainless steel with a unique black satin finish so you can distinguish yourself from your friend’s beer dispenser.
- YOU WISH THAT SOMETIMES YOU HAD A DIFFERENT BEER FLAVOR? NOW YOU CAN ! HAVE 2 beer FLAVORS poured from the same beer tower system at the same time ! It has high quality FDA-safe beer line (3/16” ID, 7/16” OD) that will not impart plastic flavors.
- YOU ARE WORRIED THAT IT MAY BE COMPLICATED TO INSTALL YOUR NEW TOWER? DO NOT FRET ! BEERGON DRAFT BEER TOWER IS SUPER EASY TO INSTALL on your tabletop and comes with all the hardware necessary to secure this column on your counter.
- ARE YOU CONCERNED THAT THE BEER TAPS WILL RUST? RELAX ! BEERGON BEER TAPS ARE SOLIDLY MADE and are installed and used in many bars and do not show signs of rust over many years !
- YOU THINK THAT A STANDARD 12-INCH TALL TOWER IS NOT HIGH ENOUGH FOR YOU? GOOD NEWS ! WE HAVE ADDED AN EXTRA INCH. Enjoy your 13-inch tall beer tower by pouring your beer into your extra-tall mugs !
Description
BEERGON Beer Tower BT-1000 is made of premium stainless steel with a black satin finish so you can distinguish yourself from your friend’s beer towers. This double tap tower for your home allows you to have 2 beer flavors poured from the same tower at the same time and is equipped with a high quality FDA-safe beer lines (3/16” ID, 7/16” OD) that will not impart plastic flavors. BEERGON DRAFT BEER TOWER is super easy to install and comes with all the hardware necessary to secure this column on your counter. BEERGON BEER TAPS are solidly made and installed and used in many bars and do not show signs of rust over many years ! GET YOUR BEERGON BEER TOWER NOW, YOU DESERVE IT !
INSIDE THE PACKAGE:
One (1) beer tower cooler insulator
Two (2) faucets/taps
Two (2) tap handles (black)
Two (2) springs already inside the faucets
Two (2) 3-feet long beer lines already installed;
One (1) wrench
One (1) washer for the column base
Four (4) bolts to secure the base on the counter
SPECIFICATIONS:
Column height: 13”
Column diameter: 3”
Base diameter: 4-3/16”
Height from base to bottom of tap: 10”
Height from base to top of tap handle: 16.25”
FDA-safe beer lines (3/16” ID, 7/16” OD)
Faucet finish: Polished Chrome
Tower body color: Black satin
5. Kegco Pro Series Dual Gauge Co2 Draft Beer Regulator
Feature
- Beware of cheap imitation! Only Beverage Factory sells this regulator with the Kegco warranty
- Dual Gauge regulator shows you working pressure and tank pressure
- Chrome Plated Brass Body
- Manual Pressure Release Valve and Pressure Adjustment Knob
- Integral Safety pressure relief valve releases at 45 PSI
Description
The Kegco 542 Pro series works with any Co2 Tank with a CGA-320 valve and measures PSI, as well as the volume of the Co2 gas in the Cylinder. The regulator body is constructed of forged brass with all brass connections and components, a sintered brass inlet filter, integrated nylon tank connection washer (and spare) and self resetting safety release valve. Both gauges feature an easy to read design. The top gauge lets you know how much Co2 Pressure is in the keg and displays 0-60 psi. The second gauge lets you know how much Co2 gas is left inside the Co2 Tank and features a 0-2000 display. A large adjustment knob with a lock ring allows gas flow to be changed without the need for a screw driver. This regulator includes a tamper proof safety pressure relive valve that releases at 45 psi. There is also a shut off valve that allows for instantly shutting off pressure to the keg without backing up your gas line.
6. Draft Beer Faucet with Brass Lever- Chrome
Description
Meet the industry standard. The quick and easy to use lever is made of brass and there’s an attractive chrome finish to make sure your point of dispense always looks great. For maximum versatility this faucet screws onto most any shank or tower. Any tap marker (faucet handle) can be used, however the handle is not included.
7. Kegco Sankey to Ball Lock Coupler Adapter Set
Feature
- Kegco Sankey coupler adapter kit includes both a gas and a liquid post
- These posts replace the barb fittings on your Sanke coupler to match the posts on a typical Cornelius ball lock style keg
- Allows you to seamlessly switch between your ball lock corny keg and a commercial Sanke keg in seconds
- No more messing with tubing connections or continuously tapping and untapping the same sanke keg when switching back and forth
- Now there’s a quick and easy solution that allows you to dispense any beer you have on tap!
8. Ball Lock Homebrew Cornelius Beer Keg – 3 Gallon – New
Description
Make kegging homebrew easier than ever with this brand-new Ball Lock Homebrew Cornelius Keg. Made from NSF-approved stainless steel with a durable rubber bottom and two convenient rubber carrying handles that make it easy to transport, this 3-gallon keg is perfect for your homebrew draft dispensing needs. Because it’s not used, it’s in the pristine condition that your beer deserves. Two ball lock connection ports allow for easy attachment of your quick disconnects so you’ll enjoy dependably hassle-free pouring of your homebrew pints. Why bother bottling? Pick up your new cornelius keg now! * Specs – Holds 3 gallons, Height:16″ and Diameter: 8.5″.
Conclusion
By our suggestions above, we hope that you can found Kegerator Conversion Kit Perth for you.Please don’t forget to share your experience by comment in this post. Thank you!