522 reviews analysed
1. SHOP FOX W1727 1 HP Dust Collector
Description
Shop Fox W1727 1 Hp 800 Cfm Portable Dust Collector 9″ Balanced Steel Impeller
2. JET DC-650BK Dust Collector with Bag Filter Kit
Feature
- Hook up one to three machines for optimum dust cleaning
- Quick install collection bag makes emptying and re attaching a snap
- Single stage design for economical and quiet operation
- Includes four casters for maneuverability and total portability
- Permanently lubricated, totally enclosed, fan cooled motors are rated for continuous duty
Description
Product Description
We see a future built on great brands, great products and great people. In every facet of our business we leverage the strengths of our global infrastructure to maximize the benefits of all three.
From the Manufacturer
If you’ve been looking for a Dust Collector for your shop with plenty of filtering ability and lots of muscle, then look no further than the JET DC-650. With Exclusive features like a powerful 1HP motor and 30-Micron filtering ability, this compact Dust Collector delivers a powerful 650CFM air flow through its 4-Inch hose connection . With an available remote control and timer the JET DC-6500 is the best choice for your shop, big or small.
3. Jet Tools – RF Remote Control 115V, for Dust Collectors (708636C)
Description
We see a future built on great brands, great products and great people. In every facet of our business we leverage the strengths of our global infrastructure to maximize the benefits of all three.
4. Jet 708701 FB-650-5M 5-Micron Filter Bag for 708640 DC-650A Dust Collector
Description
Product Description
We see a future built on great brands, great products and great people. In every facet of our business we leverage the strengths of our global infrastructure to maximize the benefits of all three.
From the Manufacturer
Your JET Dust Collector is working hard to keep your workshop clear of wood chips, sawdust, and fin airborne dust. Help maintain its (model 708621) superior performance with JETs 5-Micron Filter Bag.
SPECIFICATIONS
- Filter Bag Length: 31 in.
- Filtration: 5-Micron
- Fits model: 708621
5. Jet JCDC-1.5 1.5 hp Cyclone Dust Collector
Feature
- The cyclone’s two stage separation provides more working CFM than comparable horsepower single stage units
- Heavy debris is pulled down to collection drum before debris stream reaches the filter, providing constant suction
- Direct mounted filter eliminates inefficiencies from ridged flex hosing and bends
- Fine dust particles are filtered through pleated material that captures even the smallest particles down to 1 micron and below
- Heavy debris is captured in 20 gallon drum with quick release levers and independent casters for quick emptying
Description
Are you ready to get more from your dust collector? The Cyclone Dust Collector Collection from JET delivers the efficiency you’ve been waiting for. With a direct mount filter, a radio frequency remote control and a large collection bin these dust collectors take your shop’s capabilities to a new level. Upgrade to a JET Cyclone Dust Collector and experience The Power of Efficiency.
6. SHOP FOX W1685 1.5-Horsepower 1,280 CFM Dust Collector
Description
A powerful dust collector from Shop Fox. This unit features an extra heavy-duty 12″ steel impeller and a 1-1/2 HP motor that runs on 110V. For wood dust only. Features 2.5 micron filtration.
7. PSI Woodworking LR110-3 110-Volt Long Ranger Dust Collector Switch
Feature
- PSI Woodworking Long Ranger dust collector switch with 110-volt, 1-1/2-horspower engine and 20-amp relay receiver
- Turn on a dust collector from anywhere in the shop
- Uses R.F. signal, which is not affected by outside interference by large television transformers, electrical noise, or three-phase power sources
- Includes a circuit breaker in the receiver and a 5-foot power cord
- Ships at 1.84-pounds
8. WEN 3410 3-Speed Remote-Controlled Air Filtration System (300/350/400 CFM)
Feature
- Circulate the air in a 400 square foot room up to 7.5 times per hour
- Three-speed operation flows air at a rate of 300, 350, or 400 cubic feet per minute
- Includes a 1-micron filter and a 5-micron pre-filter, both of which can be easily replaced
- Programmable timer automatically shuts unit off after set number of minutes
- Remote control allows users to set timer, change speed and power the unit on and off from up to 26 feet away
Description
Remember when your workshop was full of clean air? Air-borne dust particulates can dirty up a woodworker’s workshop and harm a healthy respiratory system, but with the WEN 3-Speed Remote-Controlled Air Filtration System, you no longer need to worry. This system eradicates these contaminants by catching them in one of the two easily cleanable filters while circulating the air in your work area. The powerful 1/6 HP motor leaves no stone unturned, collecting every contaminant in its path. Quiet system creates 50 to 60 dB of noise and is controllable up to 26 feet away with the included remote. The lightweight design weighs in at a mere 31 pounds. Combine this with the attached carrying handle and eyebolts for easy mobility, mounting and installation. The WEN Air Filtration System collects and releases the air in your workshop after filtering it through both a 5-micron outer filter and a 1-micron inner filter. Easily switch between three speeds of 300, 350 and 400 cfm depending on what the situation calls for. With the time feature, you don’t even have to worry about turning off your machine. Simply set the timer and the machine will turn off on its own once the time runs out, allowing you to easily give your workshop a thorough cleanse at the end of a day of woodworking without having to be present. And because this is a WEN Product, your 3-Speed Remote-Controlled Air Filtration System is backed by a two-year warranty, a helpful customer service phone line, and a nationwide network of experienced technicians. Remember when you could breathe easy in your workshop? Remember WEN.
9. Jet JCDC-3 3 hp Cyclone Dust Collector Kit
Feature
- The cyclone’s two stage separation provides more working CFM than comparable horsepower single stage units
- Heavy debris is pulled down to collection drum before debris stream reaches the filter, providing constant suction
- Direct mounted filter eliminates inefficiencies from ridged flex hosing and bends
- Fine dust particles are filtered through pleated material that captures even the smallest particles down to 1 micron and below
- Heavy debris is captured in a 66 gallon drum with quick release levers and independent casters for quick emptying
Description
Are you ready to get more from your dust collector? The Cyclone Dust Collector Collection from JET delivers the efficiency you’ve been waiting for. With a direct mount filter, a radio frequency remote control and a large collection bin these dust collectors take your shop’s capabilities to a new level. Upgrade to a JET Cyclone Dust Collector and experience The Power of Efficiency.
10. JET 708675PK XACTASAW Deluxe 3-Horsepower, 1Ph, 50-Inch Rip Fence
Feature
- Quick release riving knife greatly reduces binding or kickback risk
- Push button arbor lock for rapid blade change
- Poly-V drive belt system delivers efficient, quiet operation
- Left tilt, Wide stance heavy-duty trunnion for stability and smooth blade positioning
- Enclosed cabinet with built-in sealed storage drawer
Conclusion
By our suggestions above, we hope that you can found Jet Woodworking Vacuum for you.Please don’t forget to share your experience by comment in this post. Thank you!