520 reviews analysed
1. Simpson Strong Tie SPS25344-KT Storm Panel Screw, 305 Stainless Steel, 25 Screws, Wing Nuts and Caps and 1 Hex Driver Bit, 1 Carbide Drill Bit
Description
Product Description
Ideal for attaching storm panels to wood, concrete and masonry
From the Manufacturer
Ideal for attaching storm panels to wood, concrete and masonry
2. The Hillman Group 831493 1/4 X 1-1/2-Inch Stainless Steel Hurricane Bolt, 100-Pack
Description
Product Description
Hurricane Bolts are made of strong bad durable stainless steel. They are ideal for installing hurricane panels to storefronts and sliding glass doors. Normally used in conjunction with lead anchors.
From the Manufacturer
Hurricane Bolts are made of strong abd durable stainless steel. They are ideal for installing hurricane panels to storefronts and sliding glass doors. Normally used in conjunction with lead anchors.
3. Sidewalk Bolt Stainless Steel 1/4 x 1-1/4 (Pack of 25)
Feature
- Low-profile head can remain in place when panels are down
- Hurricane bolts can also be referred to as sidewalk bolts
- These stainless steel, combo-drive sidewalk bolts measure 1/4″ in diameter x 1-1/4″ in length and come in 25 pieces per retail package
- The combo head is Slotted and Phillips. The bolt is 1/4-20 (thread is 20) and the diameter of the head is 3/4″
- Country of Origin: Taiwan
Description
Hurricane Bolts are made of strong bad durable stainless steel. They are ideal for installing hurricane panels to storefronts and sliding glass doors. Normally used in conjunction with lead anchors.
4. Hurricane Hardware Stainless Steel Phillips Combo Drive Stainless Steel Sidewalk Bolt Kit with Masonry Anchors & Set Tool – 49 Pieces
Feature
- 1/4″-20 x 1-1/2″ Phillips Slotted Combo Drive Sidewalk Bolts 18-8 Stainless Steel – 24 pieces
- 1/4″-20 Machine Screw Masonry Anchors – 24 Pieces
- Includes Setting Tool for Proper Machine Screw Anchor Installation
- Commonly used for storm windows and shutters to anchor into brick or masonry wall
- Fixtures can be removed or replaced without sacrificing holding power
5. Hard-to-Find Fastener 014973281267 281267, 1/4-20″, 12 Anchors
Description
We stock a wide variety of fasteners ideal for many applications around the home, farm, business, automotive, and in industry. Most of our fasteners have a light zinc plating over steel giving a more rust resistant finish. We also sell coated and stainless products for additional rust resistance. We stock many grades of fasteners ranging from low carbon steel on up to hardened, heat treated steel. Not all fasteners are applicable for all applications so be certain to test thoroughly and get the opinion of a licensed builder or certified building or structural engineer before relying on these fasteners for any situations where failure would result in damage to property or person.
6. CONFAST 1/4" (Inside/Screw 1/4-20 Diameter) Machine Screw Anchor with 1 Setting Tool (100 per Box)
Feature
- SHALLOW EMBEDMENT OPPORTUITIES-Less time required to drill hole
- NATIONAL COARSE THREADS-Bolts and threaded rod is most common type available
- INTERNAL THREADS Easy-removabilityWORKS IN MOST MASONRY MATERIAL-Consistent holding values in wide variety of base materials
- REQUIRES THE USE OF A SETTING TOOL-Setting tool allows for proper positive expansion of the anchor
Description
Applications
The anchor is made from Anchor Body Antimonial Lead Alloy/Cone Zamac Alloy. This anchor is designed for use in Concrete, Block, and Brick.
Environment
The anchor is designed for use in a Moist environment.
Head Style
The anchor is a head
Hole Diameter/Bit Diameter
The anchor requires a 1/2″ hole to be drilled in the base material (Concrete, Block, and Brick). The hole should be drilled with carbide tipped bit that meets ANSI standards and used in a hammer drill.
Driver Required
A is required for driving the anchor into the base material.
Diameter of Anchor
The diameter of the anchor is 1/4″.
Length Anchor
The length of the anchor is 7/8″
Thread Length
The length of the threads on the anchor is in length.
Minimum Embedment
The minimum anchor embedment into the concrete is 7/8″. Therefore, the anchor must be installed so that a minimum of 7/8″ of the anchor is embedded into the concrete.
Maximum Fixture Thickness
The maximum fixture thickness or the maximum thickness of the material being fastened for a anchor is . This will ensure that the minimum embedment of 7/8″ will be met.
Fixture Hole Diameter
The hole in the fixture or material being fastened must be larger than the designated diameter of the anchor. The 1/4″ diameter anchor requires the hole in the fixture to be 9/16″.
Spacing between Anchors
Each anchor must be spaced a minimum distance of 5″ from each other when measured center to center.
Edge Distance
It is very important not to install the anchor any closer than 2-1/2″ from an unsupported edge of the concrete.
7. WIDGETCO 1/4" x 1" Screw Thread Protectors, White – Works w/Many Hurricane Shutters
Description
1/4 inch x 1 inch White Screw Thread Protectors fit 1/4 inch (1/4-20) screws and bolts. Simply slide over the threaded end of the screw or bolt. Functions as a Thread Protector, Mask (for painting), Insulator, Decorator, Seal or to Color Code. Ideal for Hurricane Shutters.
8. Hurricane Hardware Stainless Steel Phillips Combo Drive Stainless Steel Sidewalk Bolt Kit with Masonry Anchors – 24 Pieces
Feature
- 1/4″-20 x 1-1/2″ Phillips Slotted Combo Drive Sidewalk Bolts 18-8 Stainless Steel – 12 pieces
- 1/4″-20 Machine Screw Masonry Anchors – 12 Pieces
- Commonly used for storm windows and shutters to anchor into brick or masonry wall
- Fixtures can be removed or replaced without sacrificing holding power
- Corrosion resistant stainless steel screws with caulking type anchors designed to provide a quick setting in brick, concrete or stone
9. Hard-to-Find Fastener 014973320898 Combo Truss Machine Screws, 1/4-20 x 1-1/2, Piece-100
Description
We stock a wide variety of fasteners ideal for many applications arround the home, farm, business, automotives, and in industry. Most of our fasteners have a light zinc plating over steel giving a more rust resistant finsh. We also sell coated and stainless products for additional rust resistance. We stock many grades of fasteners ranging from low carbon steel on up to hardened, heat treated steel. Not all fasteners are applicable for all applications so be certain to test thouroughly and get the opinion of a licensed building or certified building or structural engineer before relying on these fasteners for any situations where failure would result in damage to property or person.
Conclusion
By our suggestions above, we hope that you can found Hurricane Screws And Anchors for you.Please don’t forget to share your experience by comment in this post. Thank you!
