The Best How To Convert Kegerator For Homebrew Video

Feature

• Simple to use: plug it in, set the temp ranges, place the probe, plug in the heater/cooler into the marked outlet.
• Be able to connect with refrigeration and heating equipment at the same time.
• Easily calibrated.
• Can display in Centigrade or Fahrenheit.
• Whether you need temperature control for fermentation, greenhouse, kombucha control or to set up your temperature project system, the ITC-308 temperature controller is a great choice.

Feature

• ????????【Convenient Design】 Plug and play, easy to use. Support reading with Centigrade or Fahrenheit.
• ????????【Dual Display Window】 Be able to display measured temperature and set temperature at the same time.
• ????????【Only Heating】 Temperature Control Mode: On/Off Control. Please note it is only heating controller without cooling function. Both of the plugs can control the heating. But totally could not over 1200W.
• ????????【Dual Time Cycle Setting】Can be set different temperature from day and night on the basis of the physical needs of animals and plants during 24 hours.
• ????????【Different Functions】Temperature calibration, over-temperature and sensor fault alarm. Maximum output load: 1200W (110V).

Feature

• [Convenient Design] Plug and play, easy to use.
• [Reading Mode] Support reading with Centigrade or Fahrenheit unit.
• [Safe] Maximum output load: 1100W(110V).
• [Dual Relay Output] Be able to connect with refrigeration and heating equipment at the same time.
• [Dual Display Window] Be able to display measured temperature and set temperature at the same time.

Feature

• ✨✨Support reading with Centigrade or Fahrenheit unit
• ✨✨Dual display window, be able to display measured temperature and set temperature at the same time
• ✨✨Simplify operational processes and you don’t need to operate more steps if you want to set the definite value
• ✨✨High accuracy of displaying and controlling. Manual and Auto turning are available
• ✨✨1 Year Warranty

Feature

• Pre-wired controller ITC-308 is served as the successor to the STC-1000. If you don’t want to build your own STC-1000, the Inkbird ITC-308 is the solution!
• Setup is easy, straightforward and quick.
• The cord on the remote temperature sensor is a bit over 6 feet long.
• Accurate displays, thermostatic function and temperature calibration.
• It’s an all in one, simple solution providing control of cooling and heating.

Feature

Feature

• KEEP TEMPERATURE IN DESIRED RANGE AND GUARANTEED ACCURACY:It’s on/off control mode. Turn on your device at a degree and turn it off at another degree. The difference of the 2 degrees can be minimum 1°F and maximum 25°F.Fully utilize the stc microcontroller and NTC probe to have this controller has great accuracy(&lt
• 1°F).
• WIRRING HEATER AND COOLER AT THE SAME TIME:No more frequently change wirring between heater and cooler.This Incubator thermostat has 2 Relays.Compared with other 1 relay temperature controllers,you can wire 2 appliances (heater and cooler) at the same time on this temperature controller.It will automatically keep temperature in your set range.(SEPARATE POWER SOURCE NEEDED)
• OVER 40 IN WATERPROOF PROBE CORD FOR ENDLESS APPLICATION:The temperature controller is equipped with over 40’’ inch waterproof probe can be used in moisture and water enviorment,you can use it in home brewing, aquarium,pet breeding,reptile tank,incubation,fermentation,seedling heat mat, accelerating germination.
• ABS PLASTIC SHELL AND COMPRESSOR DELAY PROTECT FUNCTION:Made of ABS heavy-duty and anti-flamming plastic shell,designed with compressor delay protection,alarm when temperature exceeds temperature limit.All these promise the best safty guarantee to this temperature controller.
• KETOTEK 1 YEAR GUARANTEE AND PROFESSIONAL ELECTRICAN SUPPORT:Every piece of our products is strictly inspected before sale.If you have any question please don’t hesitate to contact use when you use it,we have profesional technicians to help you with any problems in using.All ketotek products include a 12-month warranty, we will try our best to meet your satisfaction.

Feature

• Auto converts cooling and heating modes to keep your equipments in an ideal temperature range.
• DIY design use wiring diagram, the more economical and practical choice
• The temperature sensor from Shibaura Japan,temperature control range from -50℃ to 99℃, accuracy:±1℃
• Stable and Reliable as flame retardant ABS for plastic shell reaches up to V0 level and passed EMC anti-interference test.
• Audible and visual alarm for over temperature and sensor failure problems.

Feature

• ????????[WIFI & APP] WIFI smart controller supports both IOS & Android，WIFI supports 2.4GHz Wi-Fi router, free APP “InkbirdSmart” which is able to monitor temperature at any time.
• ????????[Two Function] Heating or Cooling can be chose, support Cooling Delay Protection.
• ????????[Alarm for Safe] High/Low temperature limit setting alarm, probe abnormal alarm.
• ????????[Convenient Design] Plug-n-play, easy to use. Support °C/°F mode and Temperature calibration.
• ????????[Long Warranty] The controller itself has 2 years warranty while the temperature sensor has 1 year warranty.

Feature

• √ ● Dual display for Fahrenheit(F) and Celsius(C)，Range: -1999 to 9999 (depends on the input signal)
• √ ● Input: Thermo Resistor: PT100, Cu50，Thermocouple: K,Wre3 ~ Wre25 ， Main Output: SSR: Open circuit: 4V, Closed Circuit: 24V 40mA DC
• √ ● K type thermocouple Temperature rang:0-800℃, Sensor Dia: 4.5mm, Cable Length: 2m
• √ ● Solid state relay SSR-25DA Load Voltage: AC 24-380V, Load Current: 25A, Input Voltage: DC 3-32V
• √ ● Packing details: 1 x SNR Temperature Controller( DIN 1/8), 1 x SSR-25DA Solid State Relay, 1 x K Type Thermocouple( 6 Feet)