We spent many hours on research to finding hard start capacitor 10 hp, reading product features, product specifications for this guide. For those of you who wish to the best hard start capacitor 10 hp, you should not miss this article. hard start capacitor 10 hp coming in a variety of types but also different price range. The following is the top 9 hard start capacitor 10 hp by our suggestions
634 reviews analysed
1. Supco RCO810 3 n’ 1 START Hard Start Kit
Description
Product Description
This 3 in 1 start kit is for compressors with horse power of 1/12 through 1/5.
From the Manufacturer
This 3 in 1 start kit is for compressors with horse power of 1/12 through 1/5.
2. SUPCO SPP6 Relay/Capacitor Hard Start Kit with 500% Increase Starting Torque
Description
Relay/CAPACITOR hard start kit 500% incr starting torque,increased compressor starting torque. Designed for use on permanent split CAPACITOR single phase a/c and heat pump systems. Multiple use includes: room air conditioner units, residential or commercial psc AC units.. the country of origin is china.
3. SUPCO SPP-6 Super Boost Start Capacitor, 130-156µf Size, 1/2-10 hp, 90-277Vac
4. Century USQ1152 1-1/2 HP, 1.1 Service Factor, 48Y Frame, Capacitor Start/Capacitor Run, ODP Enclosure, Square Flange Pool Motor
5. Supco SPP6 Hard Start Kit
6. Antoble Hard Start Kit SPP6 Relay Start Capacitor Relay 1/2HP-10HP Increases Torque 500% Pow-R-Pak 120-288V AC Compressor
7. CSR-U2 Hard Start Device for 3.5- to 5-Ton AC Units by PartsBroz
Feature
- ✅ PART NUMBER CSR-U2: This hard start device is a high-quality exact replacement part for part number CSR-U2.
- ✅ FOR LARGE UNITS: The part works with larger air conditioner units. It’s compatible with most 3.5- to 5-ton AC units. Refer to your owner’s manual or reach out to us to confirm the size of your unit.
- ✅ IMPROVES AC START-UP: A hard start device improves air conditioner start-up times by 30-50%. It can extend the life of a new or even failing AC unit, saving you the expense of buying a new air conditioner or compressor.
- ✅ 30-MINUTE FIX: Unless you’re familiar with electrical, it’s best to have this device installed by a certified HVAC technician. Installation should only take 10 to 30 minutes per unit.
- ✅ HIGH-QUALITY DESIGN: This high-quality replacement part includes a potential relay, capacitor, mounting screws, and a zip tie. Specs – Control volts: 204 to 240, Pick up: 180 to 195, Drop out: 40 to 105, Voltage: 208 to 240, Phase: 1, Hz: 60, HP: 3.5 to 5, Dimensions: 2D x 2W x 5H in.
Description
Adding the CSR-U2 exact equivalent part by PartsBroz to your AC unit can speed up start-up speeds by 30 to 50%. The faster your AC unit starts up, the longer your unit will last. Why’s that? During start-up, your AC uses five to ten times more power than it does when it’s running. Overtime, the heat produced during start-up damages the unit’s compressor, capacity, and terminals, reducing the life expectancy of your AC unit. A hard start device will keep your AC unit running for as long as possible.
The CSR-U2 exact equivalent part by PartsBroz works with 3.5- to 5-ton AC units. Smaller units require a smaller capacitor.
Quick Fix that Improves AC Start-Up
Adding a hard start device to your air conditioner or compressor is a good idea if:
- Your AC unit makes a lot of noise during start up
- House lights flicker during AC start up
- Your AC unit takes a while to start up
- You want to extend the life of your AC unit
- You want to reduce your home’s energy consumption
Unsure about compatibility with your unit? Reach out to us in the customer questions and answer section or on the PartsBroz storefront.
8. TEMCo Motor Start Capacitor SC0014-216-259 mfd 110-125 V VAC Volt uf Round HVAC AC Electric
9. STT-5 HARD START KIT, 300% Boost, FROM 1/2 to 10 HP, 115-250V UL Certified
Description
Combines PTC solid state relay with a start capacitor to increase starting torque on low voltage or tight compressors. Use on permanent split capacitor (PSC) single phase A/C and heat pump systems, 115v to 250v, 6,000 to 120,000 btu-h (1/2 to 10 HP). Can be used on 115 thru 250 VAC units Applications: Fridge, Freezer, Ice Vending Machine, Room A/C Units, Residential and commercial PSC A/C units and heat pumps
Conclusion
By our suggestions above, we hope that you can found Hard Start Capacitor 10 Hp for you.Please don’t forget to share your experience by comment in this post. Thank you!