942 reviews analysed
1. GE Enbrighten Z-Wave Plus Smart Light Switch with QuickFit and SimpleWire, Compatible with Alexa, SmartThings, Wink, Zwave Hub Required, ON/OFF Control, Repeater/Range Extender, 3-Way Ready, 46201
Feature
- VOICE CONTROL – ALEXA & GOOGLE ASSISTANT COMPATIBLE (requires a Z-Wave certified hub). Works with the following Z-Wave certified hubs: SmartThings, Ring Alarm, Wink, ADT Pulse, ADT Command, Trane, Vivint, Nexia, Honeywell, Home Seer, Harmony Home Hub Extender, Vera and more.
- ADVANCED DESIGN 2ND GENERATION MODEL – Improved components reduced the housing depth by up to 20% compared to previous Z-Wave models and eliminated the need for heat tabs. Quick Fit enhancements are the ideal smart solution for older-style switch boxes, multi-gang configurations or any other application with limited space. Auto line-load sensing terminals support fast and easy installation by detecting line and load wires and configuring the dimmer accordingly. Dual ground ports, which are offset to avoid switch box mounting screws, support daisy-chaining in multi-switch setups.
- VERSATILE APPLICATIONS – Control the device remotely with your smartphone and voice commands when connected to a compatible hub or enjoy manual ON/OFF operation from the switch. Home automation is simple through custom scenes, personalized scheduling and convenient alerts. The smart device operates perfectly on its own or seamlessly integrates into multi-switch setups with required add-on switches – models 12723, 12728, 46199, or 46200. Up to four add-on switches can be connected to the same device.
- FULL-HOME COVERAGE – Z-Wave Plus works with all previous Z-Wave generations to allow continued expansion of your home-automation network. The switch is capable of controlling indoor or outdoor fixtures for whole-home automation = and repeats your Z-Wave signal from your hub or other devices to extend your range by up to 150ft. Extended signal range increases your home automation coverage to enhance your control.
- EASY INSTALLATION – Requires indoor in-wall installation with hardwired connections. NEUTRAL WIRE REQUIRED. Includes white and light almond paddles (wall plate not included). Works with all LED, CFL, incandescent and halogen bulbs as well as other devices. Operating temperature range 32-104 degrees Fahrenheit.
2. GE Enbrighten Z-Wave Plus Smart Light Dimmer with QuickFit and SimpleWire, Works with Alexa, Google Assistant, SmartThings, Wink, Zwave Hub Required, Repeater/Range Extender, 3-Way Compatible, 46203
Feature
- VOICE CONTROL – ALEXA & GOOGLE ASSISTANT COMPATIBLE (requires a Z-Wave certified hub). Works with the following Z-Wave certified hubs: SmartThings, Ring Alarm, Wink, ADT Pulse, ADT Command, Trane, Vivint, Nexia, Honeywell, Home Seer, Harmony Home Hub Extender, Vera and more.
- ADVANCED DESIGN 2ND GENERATION MODEL – Improved components reduced the housing depth by up to 20% compared to previous Z-Wave models and eliminated the need for heat tabs. Quick Fit enhancements are the ideal smart solution for older-style switch boxes, multi-gang configurations or any other application with limited space. Auto line-load sensing terminals support fast and easy installation by detecting line and load wires and configuring the dimmer accordingly. Dual ground ports, which are offset to avoid switch box mounting screws, support daisy-chaining in multi-switch setups.
- VERSATILE APPLICATIONS – Control the device remotely with your smartphone and voice commands when connected to a compatible hub or enjoy manual ON/OFF operation and brightness adjustment from the dimmer. Home automation is simple through custom scenes, personalized scheduling and convenient alerts. The smart device operates perfectly on its own or seamlessly integrates into multi-switch setups with required add-on switches – models 12723 or 46199. Up to four add-on switches can be connected to the same device.
- VERSATILE APPLICATIONS – Control the device remotely with your smartphone and voice commands when connected to a compatible hub or enjoy manual ON/OFF operation and brightness adjustment from the dimmer. Home automation is simple through custom scenes, personalized scheduling and convenient alerts. The smart device operates perfectly on its own or seamlessly integrates into multi-switch setups with required add-on switches – models 12723 or 46199. Up to four add-on switches can be connected to the same device.
- EASY INSTALLATION – Requires indoor in-wall installation with hardwired connections. NEUTRAL WIRE REQUIRED. Includes white and light almond paddles (wall plate not included). Full-range dimmability for use with dimmable LEDs and CFLs as well as incandescent and halogen bulbs. Supported wattage – 600W incandescent
- 300W LED/CFL. Supported voltage – 120VAC. Operating temperature range 32-104 degrees Fahrenheit.
Description
Set the scene with the GE-branded Enbrighten Z-Wave In-Wall Smart Dimmer with Quick Fit and Simple Wire. When paired with a compatible hub, the hardwired smart dimmer operates wall, ceiling and accent lighting through individual commands and programmed settings. Wirelessly control and schedule indoor or outdoor fixtures for effortless management of your home. Your automation possibilities are seemingly infinite when connected to hubs from Ring, Wink, SmartThings, Home Seer, Vera, Nexia and more.
3. GE Enbrighten Z-Wave Plus Direct Wire 40 Amp Smart Switch, Indoor/Outdoor, 120-277V Lighting Appliance Control, Range Extender, Zwave Hub Required, Works with SmartThings, Wink, Alexa, 14285, White
Feature
- ALEXA COMPATIBLE – REQUIRES AN ALEXA SUPPORTED HUB for voice control with Echo Products (Alexa device and hub sold separately). CANNOT connect directly with ECHO PLUS (Only ZigBee products can connect directly to Echo Plus).
- Requires a Z-Wave certified gateway. Compatible with the following Z-Wave certified Hubs: SmartThings, Wink, ADT Pulse, Trane, Vivint, Nexia, Honeywell, HomeSeer, Harmony Home Hub Extender, Vera, Connect, Fibaro and Iris. Works with Alexa for voice control (hub required
- Alexa device and hub sold separately)
- Remotely controls the ON/OFF functions of water heaters, landscape lighting, spas, pool pumps, heaters and other large load devices – up to 11,000 watts (277v). Energy monitoring capability allows remote monitoring of watt- and kilowatt hours.
- Lockable, tamper-resistant metal case keeps out dirt/debris and keeps settings and wiring secure. Weather-resistant, rugged designed housing suitable for use outdoors in damp or wet conditions.
- Z-Wave S2 Security and Smartstart supported with compatible gateways. S2 Security virtually eliminates the risk of devices being hacked while being included in your network (does not impact interoperability with older Z-Wave products). Using Smartstart with compatible gateways makes the installation process simple and trouble-free eliminating the confusion and unpredictability of device installation.
Description
Transform any home into a smart home with the GE 40 amp Z-Wave plus direct-wire indoor/outdoor smart switch. When added to a Z-Wave network, the heavy duty switch enables wireless control of on/off functions for large load, hard-wired applications such as waters heaters, landscape lighting, spas, pool pumps and heaters. The smart switch can be used indoors or outdoors and features an easy access wire connection block, front mounted LED lights indicating power and on/off status, and an override switch to turn connected devices on or off manually. The smart switch is housed in a lockable, tamper-resistant case to ensure settings and wiring are secure. The rugged, weather-resistant design will keep out dirt and debris while being suitable for use in extreme weather conditions.
4. GE Enbrighten Add QuickFit and SimpleWire, in-Wall Paddle, Z-Wave ZigBee Wireless Smart Lighting Controls, NOT A STANDALONE Switch, 46199, White & Light Almond
Feature
- ULTIMATE FLEXIBILITY – Add a switch to any GE Smart Control Automation Switch to control lights or devices from multiple locations for three or four-way control. Compatible with GE In-Wall Z-Wave and ZigBee switches, dimmers and fan controls. Works with LED, CFL, incandescent and halogen lights.
- SPACE-SAVING HOUSING DESIGN –Improved components reduced the housing depth by up to 20 percent compared to previous Z-Wave models and eliminated the need for heat tabs. Quick Fit enhancements are the ideal smart solution for older-style switch boxes, multi-gang configurations or any other application with limited space.
- EASY INSTALLATION WITH SIMPLE WIRE – Dual ground ports, which are offset to avoid switch box mounting screws, support daisy-chaining in multi-switch setups.
- LIGHT COMMERCIAL CAPABLE – Supports 120V and 277V for universal use in a variety of systems. The switch is suitable for use in common home 120V or light-commercial 277V applications without additional equipment.
- MULTI-SWITCH OPERATION – Easily replace any in-wall control in a multi-switch configuration to remotely turn on or off and set programs for a wide range of fixtures. The switch is not a standalone device. It must be used with a GE-branded smart control for Z-Wave or ZigBee home automation. The smart switch or dimmer and as many as four add-on switches can be linked for up to 6-way operation.
5. Honeywell Z-Wave Plus Smart On/Off Light and Appliance Switch, Dual Outlet Plug-In, 2 Controlled Together | Repeater Range Extender| ZWave Hub Required – SmartThings, Wink, and Alexa Compatible, 39342
Feature
- WIRELESSLY CONTROL & SCHEDULE LIGHTS & OTHER DEVICES – Schedule timed events for connected devices. Customize scenes for day or night, home or away. Wirelessly control switch from anywhere through your smartphone, tablet, PC or Z-Wave remote.
- 2 SIMULTANEOUSLY CONTROLLED GROUNDED OUTLETS – features 2 grounded outlets that can be controlled at the same time (NOT SEPERATLEY) and a manual ON/OFF & program physical button. Works with all LED, CFL, halogen and incandescent bulbs and other devices.
- REQUIRES A Z-WAVE CERTIFIED HUB – Compatible with the following Z-Wave Hubs: Honeywell, SmartThings, Pulse, Trane, Wink, Nexia, Honeywell, HomeSeer, Harmony Home Hub Extender, Vera, Fibaro, Vivint and ADT.
- ALEXA COMPATIBLE (HUB REQUIRED) – Requires an Alexa supported hub for voice control with Amazon Echo Products (Alexa device and hub are sold separately). Cannot connect directly with ECHO PLUS (Only ZigBee products can connect directly to Echo Plus).
- EASY SETUP – simply plug the module into any in-wall outlet, then connect your lights or devices to the smart outlets located on the side of the plug-in (one outlet on left and right side). Space saving design will leave the bottom outlet free to use when plugged into the top outlet.
6. GE Enbrighten Z-Wave Plus Smart Motion Sensor Light Switch, On/Off, Vacancy / Occupancy Sensor, Includes White and Lt. Almond, Zwave Hub Required, Works with SmartThings, Wink, and Alexa, 26931
Feature
- ALEXA COMPATIBLE – REQUIRES AN ALEXA SUPPORTED HUB for voice control with Echo Products (Alexa device and hub sold separately). CANNOT connect directly with ECHO PLUS (Only ZigBee products can connect directly to Echo Plus)
- Requires a Z-Wave certified gateway. Compatible with the following Z-Wave certified Hubs: SmartThings, Wink, ADT Pulse, Trane, Vivint, Nexia, Honeywell, HomeSeer, Harmony Home Hub Extender, Vera, Connect and Iris. Works with Alexa for voice control (hub required
- Alexa device and hub sold separately)
- Wirelessly trigger scenes and send alerts when motion detection has turned lights on or off. Remotely monitor with any mobile device (Requires Z-Wave gateway or controller)
- Multiple Operation Modes: Occupancy – auto ON/auto OFF, Vacancy – manual ON/auto OFF, Manual – manual ON/OFF. 3 Sensitivity Levels – low, medium, high
- Requires in-wall installation with hard-wired connections – Neutral wire REQUIRED. Includes white and light almond paddles (wall plate not included)
7. Zooz Z-Wave Plus Toggle Dimmer Light Switch ZEN24 VER 3.0 (White), Works with Existing Mechanical 3-Way Switch
Feature
- Manual or remote on/off and dimming control from your mobile device or computer (when included to a Z-Wave gateway controller – sold separately). Reports status instantly!
- Direct 3-way Solution: no add-on switch needed! Works with mechanical 3-way switches as long as NEUTRAL is present. On/off only from the slave switch (dim lights from ZEN24 or your Z-Wave hub)
- NEW! Improved dimming capability for LED bulbs (scroll down for details, NOT compatible with Luminus bulbs).
- VERSION 3.0: More space for wall plate screws added (use short screws included in the box). Double tap to full brightness. Fully adjustable ramp rate (if you hub supports advanced setting input). Remembers and restores on/off/brightness status after power failure.
- Neutral wire required! Z-Wave Plus certified > better range and communication speed. UL certified.
Description
- NOTE: Do NOT connect this switch to ceiling fans, motors, or home appliances. Use with lighting only.
- Model Number: ZEN24 VER 3.0
- Z-Wave Signal Frequency: 908.42 MHz
- Power: 120 VAC, 60 Hz
- Minimum Load: 15W for LED and CFL bulbs
- Maximum Loads: 500W single, 400W 2-gang, 300W 3-gang Incandescent, 150W CFL or LED
- Z-Wave Range: Up to 100 feet line of sight
- Operating Temperature: 32-104° F (0-40° C)
- Installation and Use: Indoor only
- Amazon Basic
- BROADA
- CMYK Edison Style
- CREE
- Ecosmart
- GE
- Halo
- Philips
- Sunco
- Sylvania
- Utilitech Recessed Dimmable LED’s
- Utilitech Dimmable LED’s
- Click the toggle up to turn on the light to the last brightness level. It takes around 3 seconds for the dimmer to reach full brightness. The ramp rate is not adjustable.
- Click the toggle down to turn off the light (with a fade-out effect and 3-second ramp rate).
- Press and hold the toggle up to add more brightness. Press and hold it down to reduce brightness.
- After power failure, the switch will automatically turn on to the last brightness level.
- In a 3-way installation, the slave (mechanical switch) can only turn the light on or off. The slave switch will always turn the light on only to the last brightness level. Dimming is only available from the master Zooz switch and your Z-Wave software.
NEUTRAL WIRE REQUIRED
- SPECIFICATIONS:
Will it dim my bulbs?
You’ll be able to adjust brightness levels between 10% and 100% (with full on/off capability) for the following popular dimmable LED bulbs:
Manual Operation:
8. Zwave Plus Switch On/Off Smart Toggle Light Switch Works With SmartThings, Wink, Support 3-Way Installation, Signal Repeater, Required Z-Wave Hub, White(MS12Z)
Feature
- Voice Control :This switch is compatible with Alexa Echo and Google Home. REQUIRES AN ALEXA SUPPORTED HUB for voice control with Echo Products. CANNOT connect directly with ECHO PLUS.
- Requires a Z-Wave certified gateway: The MS11Z is compatible with Samsung Smart Things, the Wink Hub, and all certified Z-Wave controllers
- Compatible for: This Z-Wave enabled universal switch works for most residential lighting control. It supports LED, CFL,incandescent and halogen bulbs. Supported voltage – 120 VAC
- Wireless control: Turn on/off, schedule, or group the light from multiple switches all with a smartphone app, automatically turn lights on when you are home, and off when you are away.
- Installation Requires:With hard-wired connections – Neutral wire REQUIRED. Includes white faceplate
9. GE Enbrighten Z-Wave Plus Outdoor Smart Plug Switch, 1 On/Off Outlet, Weather-Resistant, Built-in Repeater/Range Extender, Zwave Hub Required, Works with SmartThings, Wink, Alexa, 14284, BLACK
Feature
- ALEXA COMPATIBLE – REQUIRES AN ALEXA SUPPORTED HUB for voice control with Echo Products (Alexa device and hub sold separately). CANNOT connect directly with ECHO PLUS (Only ZigBee products can connect directly to Echo Plus).
- Requires a Z-Wave certified gateway. Compatible with the following Z-Wave certified Hubs: SmartThings, Wink, ADT Pulse, Trane, Vivint, Nexia, Honeywell, HomeSeer, Harmony Home Hub Extender, Vera, Connect and Iris. Works with Alexa for voice control (hub required
- Alexa device and hub sold separately).
- Wirelessly schedule and control your home’s outdoor lighting and appliances, including seasonal and landscape lighting, fountains and pumps, from anywhere, at any time. Supported voltage – 120 VAC
- Features one (1) Z-Wave enabled outlet and a manual On/Off button – Integrated outlet cover protects the module outlet from dirt and debris when not in use.
- Weather and impact resistant housing withstands damp or wet conditions. Built-in mounting bracket for temporary and long term installation – should not be exposed directly to rain or immersed in water.
Description
Transform any home into a smart home with the plug-in GE Z-Wave outdoor smart switch. The outdoor switch enables you to wirelessly control your home’s outdoor lighting and appliances, including seasonal and landscape lighting, fountains and pumps, letting you turn lights on and off or Schedule a timed event from anywhere in the world, at any time of the day. The weather-resistant housing with a protective outlet cover safeguards the outlet from dirt and debris when not in use and its discreet black color blends in with any outdoor environment. Take control of your home lighting with GE Z-Wave smart lighting controls
10. GE Enbrighten Plus Smart Switch with QuickFit and SimpleWire, in-Wall Commercial Grade 120/277 VAC, Z-Wave Hub Required, Works with Ring, SmartThings, Alexa, 43072, White & Light Almond
Feature
- ALEXA COMPATIBLE – REQUIRES AN ALEXA SUPPORTED HUB for voice control with Echo products (Alexa device and hub sold separately). CANNOT connect directly with ECHO PLUS. Wirelessly control ON/OFF functions of lighting with your mobile device or computer using any Z-Wave certified gateway. Supported voltage – 120/277 VAC. Wireless range: Up to 150 feet.
- SPACE-SAVING HOUSING DESIGN – Improved components reduced the housing depth by up to 20 percent compared to previous Z-Wave models and eliminated the need for heat tabs. QuickFit enhancements are the ideal smart solution for older-style switch boxes, multi-gang configurations or any other application with limited space.
- EASY INSTALLATION WITH SIMPLEWIRE – Auto line-load sensing terminals support fast and easy installation by detecting line and load wires and configuring the switch accordingly. Dual ground ports, which are offset to avoid switch box mounting screws, support daisy-chaining in multi-switch setups.
- LIGHT-COMMERCIAL CAPABLE – Supports 120VAC and 277VAC for universal use in a variety of systems. The switch is suitable for use in common home 120VAC or light-commercial 277VAC applications without additional equipment. The smart device operates perfectly on its own or seamlessly integrates into multi-switch setups when paired with GE-branded Z-Wave Add-on Switches. Up to five add-on switches can be connected to the same light, fan or appliance.
- ADDITIONAL FEATURES – Easily replace any standard in-wall switch equipped with a neutral wire to remotely turn on or off and create schedules for a wide range of fixtures. White and light almond rocker-style paddles are included to match your existing switches. Black, brown and ivory options are also available. Works with all LED, CFL, incandescent and halogen bulbs, and other devices. It must be connected to a supported hub to interact with the Alexa. NEUTRAL WIRE REQUIRED.
Conclusion
By our suggestions above, we hope that you can found Ge Zwave 65613 for you.Please don’t forget to share your experience by comment in this post. Thank you!