736 reviews analysed
1. GE Enbrighten Z-Wave Plus Smart Motion Sensor Light Switch, On/Off, Vacancy / Occupancy Sensor, Includes White and Lt. Almond, Zwave Hub Required, Works with SmartThings, Wink, and Alexa, 26931
Feature
- ALEXA COMPATIBLE – REQUIRES AN ALEXA SUPPORTED HUB for voice control with Echo Products (Alexa device and hub sold separately). CANNOT connect directly with ECHO PLUS (Only ZigBee products can connect directly to Echo Plus)
- Requires a Z-Wave certified gateway. Compatible with the following Z-Wave certified Hubs: SmartThings, Wink, ADT Pulse, Trane, Vivint, Nexia, Honeywell, HomeSeer, Harmony Home Hub Extender, Vera, Connect and Iris. Works with Alexa for voice control (hub required
- Alexa device and hub sold separately)
- Wirelessly trigger scenes and send alerts when motion detection has turned lights on or off. Remotely monitor with any mobile device (Requires Z-Wave gateway or controller)
- Multiple Operation Modes: Occupancy – auto ON/auto OFF, Vacancy – manual ON/auto OFF, Manual – manual ON/OFF. 3 Sensitivity Levels – low, medium, high
- Requires in-wall installation with hard-wired connections – Neutral wire REQUIRED. Includes white and light almond paddles (wall plate not included)
2. GE Enbrighten Z-Wave Plus Smart Motion Dimmer Switch, Full Light Dimming, Vacancy/Occupancy Sensor, White and Lt. Almond, Zwave Hub Required, Works with SmartThings, Wink, Alexa, 26933
Feature
- 2018 EXC!TE AWARD WINNER – Wirelessly trigger scenes and send alerts when motion detection has turned lights on or off. Remotely monitor with any mobile device (Requires Z-Wave gateway or controller)
- Multiple Operation Modes: Occupancy – auto ON/auto OFF, Vacancy – manual ON/auto OFF, Manual – manual ON/OFF. 3 Sensitivity Levels – low, medium, high
- Requires in-wall installation with hard-wired connections – Neutral wire REQUIRED. Includes white and light almond paddles (wall plate not included)
- Requires a Z-Wave certified gateway. Compatible with the following Z-Wave certified Hubs: SmartThings, Wink, ADT Pulse, Trane, Vivint, Nexia, Honeywell, HomeSeer, Harmony Home Hub Extender, Vera, Connect and Iris. Works with Alexa for voice control (hub required
- Alexa device and hub sold separately)
- ALEXA COMPATIBLE – REQUIRES AN ALEXA SUPPORTED HUB for voice control with Echo Products (Alexa device and hub sold separately). CANNOT connect directly with ECHO PLUS (Only ZigBee products can connect directly to Echo Plus)
3. C by GE 4-Wire Motion Sensing Switch Dimmer for Smart Bulbs- Works with Alexa + Google Home Without Hub, Single-Pole/3-Way Replacement On/Off Toggle, White
Feature
- A SMART SWITCH FOR EVERYBODY IN THE HOUSE: The C by GE Smart Light Switch comes with a dimmer so you can control your lights through the mobile touch app or voice assistant.
- C BY GE SMART LIGHT SWITCH DIMMER: Get convenience and comfort with your smart bulb and LED dimmer switch always being ready to respond. With enhanced functionality like out of home control and scheduling, you will never come home to a dark house.
- BUILD YOUR SMART HOME WITH SMART BULBS THAT WORK WITH ALEXA/ GOOGLE HOME: The C by GE Smart Bulbs and the Smart Switch Dimmer work with voice and app control at all times, even when the wall switch is turned off.
- MAKE TRADITIONAL LIGHT BULBS SMART BULBS: The C by GE dimmer switch allows you to easily make your light bulbs compatible with Google Home or Amazon Alexa when paired with your smart devices.
- A SMART DIMMER SWITCH FOR LED LIGHTS AND MORE: Set scenes to match your mood by simply using the LED dimmer switch with mobile app compatibility or voice assistant to control brightness level. Also works with incandescent, halogen, and CFL bulbs.
Description
The C by GE Smart Switch-Motion Sensing and Dimmer adds smart bulb functionality to traditional bulbs and keeps smart bulbs smart. The smart Wi-Fi switch works as dimmer switch and enhances traditional bulb functionality with motion sensing, out-of-home control, scheduling and scene setting. With motion sensing and ambient light detection, set lights to turn on or off based on natural light and motion in the room. When C by GE Smart Bulbs are installed, the smart switch allows app or voice control even when power is turned off at the switch. Pair the Smart Switch with C by GE Smart Bulbs in other fixtures like table lamps and control your all your lights in the room from one wall switch. C by GE Smart Switch wirelessly connects with other C by GE Smart Switches so you can control the same light fixture from multiple switches without a travel wire, even if the switches are on different circuits. Simple DIY set up. The Smart Switch connects directly with Google Home and Alexa devices without a hub required. Neutral wire–usually a white or gray wire–is required.
4. C by GE 3-Wire Smart Switch – Motion-Sensing and Dimmer – Works with Alexa + Google Home Without Hub, Single-Pole/3-Way Replacement, White
Feature
- A SMART SWITCH FOR EVERYBODY IN THE HOUSE: The C by GE Smart Light Switch comes with a motion sensor and LED dimmer. You can control your lights through touch, the C by GE mobile app, or voice assistant. With enhanced functionality like out of home control and scheduling, you will never come home to a dark house.
- SAVE MONEY AND ENERGY WITH THE C BY GE MOTION SENSOR SWITCH: Motion and ambient light detection turn light bulbs on or off based on the amount of natural light or motion in the room providing hands-free control and energy savings.
- BUILD YOUR SMART HOME WITH SMART BULBS THAT WORK WITH ALEXA/ GOOGLE HOME: The C by GE Smart Bulbs and the Smart Switch Dimmer work with voice and app control at all times, even when the wall switch is turned off.
- MAKE TRADITIONAL LIGHT BULBS SMART BULBS: The C by GE dimmer switch allows you to easily make your light bulbs compatible with Google Home or Amazon Alexa when paired with your smart devices.
- EASY TO USE IN ANY HOME: This LED dimmer switch works with most common residential wiring, and no neutral wire is required. DIY installation takes about 30 minutes for this smart dimmer switch for incandescent, halogen, CFL, and LED lights.
- MINIUMUM REQUIREMENTS: 2.4 GHZ Wi-Fi & Ground, Load, and Line wires
- MINIMUM WATTAGE REQUIREMENT: Requires a 15-Watt minimum on the switch’s circuit (use the included bulb adaptor for medium base bulbs if less than 15-watts)
Description
Smart Switch Motion Sensing Dimmer (Button with light ring) – 3 Wire No Neutral
5. GE Enbrighten Z-Wave Plus Smart Light Switch with QuickFit and SimpleWire, Compatible with Alexa, SmartThings, Wink, Zwave Hub Required, ON/OFF Control, Repeater/Range Extender, 3-Way Ready, 46201
Feature
- VOICE CONTROL – ALEXA & GOOGLE ASSISTANT COMPATIBLE (requires a Z-Wave certified hub). Works with the following Z-Wave certified hubs: SmartThings, Ring Alarm, Wink, ADT Pulse, ADT Command, Trane, Vivint, Nexia, Honeywell, Home Seer, Harmony Home Hub Extender, Vera and more.
- ADVANCED DESIGN 2ND GENERATION MODEL – Improved components reduced the housing depth by up to 20% compared to previous Z-Wave models and eliminated the need for heat tabs. Quick Fit enhancements are the ideal smart solution for older-style switch boxes, multi-gang configurations or any other application with limited space. Auto line-load sensing terminals support fast and easy installation by detecting line and load wires and configuring the dimmer accordingly. Dual ground ports, which are offset to avoid switch box mounting screws, support daisy-chaining in multi-switch setups.
- VERSATILE APPLICATIONS – Control the device remotely with your smartphone and voice commands when connected to a compatible hub or enjoy manual ON/OFF operation from the switch. Home automation is simple through custom scenes, personalized scheduling and convenient alerts. The smart device operates perfectly on its own or seamlessly integrates into multi-switch setups with required add-on switches – models 12723, 12728, 46199, or 46200. Up to four add-on switches can be connected to the same device.
- FULL-HOME COVERAGE – Z-Wave Plus works with all previous Z-Wave generations to allow continued expansion of your home-automation network. The switch is capable of controlling indoor or outdoor fixtures for whole-home automation = and repeats your Z-Wave signal from your hub or other devices to extend your range by up to 150ft. Extended signal range increases your home automation coverage to enhance your control.
- EASY INSTALLATION – Requires indoor in-wall installation with hardwired connections. NEUTRAL WIRE REQUIRED. Includes white and light almond paddles (wall plate not included). Works with all LED, CFL, incandescent and halogen bulbs as well as other devices. Operating temperature range 32-104 degrees Fahrenheit.
6. TOPGREENER In-Wall PIR Motion Sensor Light Switch, Occupancy Sensor Switch, On/Off Override, 4A, 500W, Single Pole, Neutral Wire Required, TSOS5-W, White, 2 Pack
Feature
- 2-pack motion sensor switch automatically turns on/off lights, fans, and motors based on the occupancy and vacancy detected in a room
- AUTO mode works as an occupancy sensor (Auto ON, Auto OFF). ON and OFF modes allow you to override the sensor and use the sensor switch as a regular light switch
- Max Sensor Coverage Area 707 sq ft, 180º Field of View. Adjustable range and sensitivity from 30% to 100%
- Occupancy sensor light switch features variable time delay from 15 sec (test mode) to 30 min
- *PLEASE CHECK WITH A QUALIFIED ELECTRICIAN TO DETERMINE IF YOU HAVE THE PROPER WIRING*
Description
TOPGREENER TSOS5-W Passive Infrared In-Wall Motion Sensor Light Switch, you can enjoy great savings and convenience with lighting control. When you put the slide switch button to AUTO mode, TSOS5 PIR motion sensor will detect motion and turn on load such as a lights, fans, motors, or heaters automatically; and turn off the load when no motion is sensed for preset delay time. Variable delay time between 15 seconds, 10 minutes, 20 minutes and 30 minutes.
Passive Infrared, PIR sensor detect occupancy by sensing the difference between heat emitted from the human body in motion and background space. This occupancy sensor has a maximum coverage area up to 707 sq. ft., 180-degree field of view; sensitivity level is adjustable in 4 positions from 30% to 100%. To provide adequate coverage with-in a space, motion activated sensors utilize a unique Fresnel lens which divides the coverage area into zones, thus enhancing the detection of small movement.
With Top Greener’s TSOS5 in-wall motion sensor light switch, you will enjoy the energy efficient benefits and avoid energy waste by preventing lights to turn on in the day time even when motion is detected.
Use the TSOS5 as occupancy motion detector sensor, or set it to be in manual OFF or ON mode just like your standard ON/OFF.This operation can be done easily by sliding the sliding switch on the front of the motion sensor. TOPGREENER’s TSOS5 motion sensor light switch is perfect for areas like your hallway, stairway, closet, bathroom garage, and more!
Specifications: CFL/LED: 150-Watt @ 120 VACIncandescent/Halogen: 500-Watt @ 120 VAC Fluorescent: 500-Volt Amp @ 120 VACMotor: 1/8HP @ 120 VAC Coverage: 180 degrees, 707 square feet
Single-Pole use only Neutral wire required
7. Honeywell Z-Wave Plus On/Off Smart Light Switch, In-Wall Paddle, Interchangeable White & Almond |Built-In Repeater & Range Extender | ZWave Hub Required – SmartThings, Wink, Alexa Compatible, 39348
Feature
- WIRELESSLY CONTROL & SCHEDULE LIGHTS AND OTHER DEVICES– Wirelessly control switch from anywhere through your smartphone, tablet, PC or Z-Wave remote. Schedule timed events for connected devices and customize scenes for day or night, home or away – Switch can also be operated manually
- REQUIRES A Z-WAVE CERTIFIED HUB – Compatible with the following Z-Wave Hubs: Honeywell, SmartThings, Pulse, Trane, Wink, Nexia, Honeywell, HomeSeer, Harmony Home Hub Extender, Vera, Fibaro, Vivint and ADT.
- ALEXA COMPATIBLE (HUB REQUIRED) – Requires an Alexa supported hub for voice control with Amazon Echo Products (Alexa device and hub are sold separately). CANNOT connect directly with ECHO PLUS or other Alexa products (Only ZigBee products can connect directly to Echo Plus).
- IN-WALL INSTALLATION WITH HARD WIRED CONNECTIONS (NEUTRAL WIRE REQUIRED) – replace your existing switch in as little as 15 minutes. Works with all LED, CFL, halogen and incandescent bulbs, and other devices.
- INCLUDES CHANGEABLE PADDLE COLORS – includes white and light almond paddles to match any home décor. Features a blue LED indicator light to locate the switch in a dark room. Wall plate is NOT INCLUDED.
8. (Pack of 2) White Motion Sensor Light Switch – NEUTRAL Wire Required – Single Pole Only (Not 3-Way) – For Indoor Use – Vacancy & Occupancy Modes – Title 24, UL Certified – Adjustable Timer
Feature
- NEUTRAL WIRE REQUIRED: This motion sensor requires connecting all 4 wires (including the NEUTRAL wire) in order to function properly. Lights will flash if not correctly connected. Please review your wiring setup prior to purchase. If you have any doubt, please consult with a licensed electrician.
- SAVE ON ELECTRICITY BILLS: This dual purpose vacancy and occupancy wall switch sensor provides optimal management of lighting and a choice of either Manual-On (Vacancy Sensor) or Automatic-On (Occupancy Sensor) switching. These sensors are engineered to ensure that lights will turn ON manually or automatically and turn OFF automatically when motion is no longer detected within range. This saves energy, provides convenience and lowers electric bills.
- ADJUSTABLE SENSITIVITY WITH WIDE FIELD OF VIEW: The motion sensor covers 180°, so all motion is detected. There’s no need to wave your hands at the sensor. Sensitivity can be adjusted, so the lights won’t switch off at inconvenient times.
- 100% MONEY BACK GUARANTEE: We stand behind the quality and utility of this light switch. If you aren’t completely satisfied with it, for any reason at all, simply send it back to us for a full refund – no hassles, no delays and no questions asked.
- FULLY CERTIFIED AND COMPLIANT: UL Certified, FCC Listed and California Title 24 Compliant.
9. GE Enbrighten Z-Wave Plus Smart Light Switch 2-pack with QuickFit and SimpleWire, 3-Way Ready, Works with Alexa, Google Assistant, Zwave Hub Required
Feature
- VOICE CONTROL – ALEXA & GOOGLE ASSISTANT COMPATIBLE (requires a Z-Wave certified hub). Works with the following Z-Wave certified hubs: SmartThings, Ring Alarm, Wink, ADT Pulse, ADT Command, Trane, Vivian, Nexin, Honeywell, Home Seer, Harmony Home Hub Extender, Vera and more.
- ADVANCED DESIGN 2ND GENERATION MODEL – Improved components reduced the housing depth by up to 20% compared to previous Z-Wave models and eliminated the need for heat tabs. Quick Fit enhancements are the ideal smart solution for older-style switch boxes, multi-gang configurations or any other application with limited space. Auto line-load sensing terminals support fast and easy installation by detecting line and load wires and configuring the dimmer accordingly. Dual ground ports, which are offset to avoid switch box mounting screws, support daisy-chaining in multi-switch setups. For increased convenience, the optional toggle backlight provides a soft glow and can be reversed, turned off or always on based on your indicator preferences.
- VERSATILE APPLICATIONS – Control the device remotely with your smartphone and voice commands when connected to a compatible hub or enjoy manual ON/OFF operation from the switch. Home automation is simple through custom scenes, personalized scheduling and convenient alerts. The smart device operates perfectly on its own or seamlessly integrates into multi-switch setups with required add-on switches – models 12728 or 46200. Up to four add-on switches can be connected to the same device.
- FULL-HOME COVERAGE – Z-Wave Plus works with all previous Z-Wave generations to allow continued expansion of your home-automation network. The switch is capable of controlling indoor or outdoor fixtures for whole-home automation and repeats your Z-Wave signal from your hub or other devices to extend your range by up to 150ft. Extended signal range increases your home automation coverage to enhance your control.
- EASY INSTALLATION – Requires indoor in-wall installation with hardwired connections. NEUTRAL WIRE REQUIRED. Wall plate not included. Works with all LED, CFL, incandescent and halogen bulbs as well as other devices. Operating temperature range 32-104 degrees Fahrenheit.
Description
Home automation is even smarter with the 2-pack GE-branded Enbrighten Z-Wave Plus In-Wall Smart Switch with Quick Fit and Simple Wire. When paired with a compatible hub, the hardwired smart switch operates wall, ceiling and accent lighting through individual commands and programmed settings. Wirelessly control and schedule indoor or outdoor fixtures for effortless management of your home. Your automation possibilities are seemingly infinite when connected to hubs from Ring, Wink, SmartThings, Home Seer, Vera, Nexin and more.
Conclusion
By our suggestions above, we hope that you can found Ge Motion Switch for you.Please don’t forget to share your experience by comment in this post. Thank you!