The Best Gas Line For Dryer Code

Product Description

Safely and easily install any gas dryer with a user-friendly kit that includes all the parts you need. Includes 48″ stainless steel gas connector, 3 fittings, pipe thread sealant and leak test solution. Detailed installation guide helps make installation safe, easy and efficient.

From the Manufacturer

Safely and easily install any gas dryer with a user-friendly kit that includes all the parts you need. Includes 48″ stainless steel gas connector, 3 fittings, pipe thread sealant and leak test solution. Detailed installation guide helps make installation safe, easy and efficient.

This kit contains 36 IN yellow coated corrosion resistant SS gas connector with 1/2 IN FIPx1/2 IN MIP-tapped 3/8 IN FIPx1/2 IN MIP SmartSense EFV & TS adapters, thread sealant, leak solution. This CSA approved gas connector is commonly used on home appliances like gas dryers. SmartSense used with Dormont coated gas connectors gives an industry leading 3 Levels of Protection. This 1/2 IN OD flarex1/2 IN MIP SmartSense excess flow valve and thermal shut off is an intricately-designed valve with two primary components, a gas flow-limiting plunger and thermal shutoff sensing ring. SmartSense detects and activates in the event of gas line rupture, disconnection, or fire. The plunger limits gas flow protecting against excessive gas leaks in the event of full-line rupture or disconnect. SmartSense self resets to the standard rate of flow after gas line restoration and pressure equalization. The internal thermal ring expands to stop gas flow for temperatures ranging from 350 to 425 degrees F.

Product Description

SD Series, 60″, Pro-Coat Epoxy Coated, Stainless Steel, Gas Appliance Connector, 3/8″ I.D. x 1/2″ O.D. Tube, 1/2″ Female Pipe Thread x 1/2″ Male Pipe Thread, Product Comes in Re-Sealable Zip lock Bags, AGA Approved & IAS Design Certified For Indoor/Outdoor Use, Recommended For Forced Air Heaters, Gas Ranges, Furnaces, & Water Heaters.

From the Manufacturer

Brasscraft CSSD54-60 Gas Dryer and Water Heater Flex-Lines .

This is a Flextron gas connector from their YC34 series of connectors, which is designed for indoor and is designed as part of a tank less water heater or -valve kit. it has an outer diameter of 1" and an inner diameter of 3/4" and is made of stainless steel coated with a yellow epoxy coating along the entire length of the connector. the coating gives it extra protection against corrosion when it comes in contact with chemicals that are typically found in households. on the ends of this 36" long connecter are a 3/4" fip and a 3/4" mip fitting, made of zinc-plated stainless steel type s45c. the connector is rated for use in the temperature range of -40 f to 150 f and it is certified by csa for use up to a pressure of 0.5 psi. please consult the product information for the flow capacity for this part, for natural gas. the part is certified by commonwealth of Massachusetts, the city of new York and by upc and csa for meeting the amse A112.18.6 and ansi Z21.24, Z21.69 and Z21.75 gas appliances and manufactured homes standards. each connector is 100% tested on leaks before it leaves the factory. the design has been tested on strength and it can withstand an internal hydrostatic pressure of 250 psi or 17 mpa without bursting or showing signs of leaks. it can also endure up to 30 bends without leaks in water at a depth of maximum 2 inches and withstands 15 twists of 90 degrees, without showing signs of corrosion. its flared end fittings result in a metal to metal seal, which is tested to be leak free within a tighten torque of 1040 inch-pounds. the connector can handle external temperatures of 800 f.

Along with everything needed for installing most gas appliances
On/off valve provides easy servicing of appliances or summer shutdown
5 Pieces kit includes: 22″ stainless flexible gas connector
1/2″female flare at both ends
1/2″ male Flare x 1/2″ NPT
1/2″ male flare x 3/8″ male NPT
1/2″ male flare x 3/8″ female NPT
Brass shut-off valve with 1/2″ female NPT x 1/2″ male flare
Fit for gas logs, garage heaters, gas stoves and wall mounted heaters

Product Description

Exceptional Products For Exceptional Yards. Great yards demand equipment that’s as dedicated and hardworking as you. Fortunately, the Husqvarna range of lawn and garden equipment offers everything from lawnmowers and ride-on mowers to trimmers and chainsaws to let you master your great outdoors. You and Husqvarna – together we will make your yard the envy of the neighborhood. Commercial Grade co-polymer trimmer line in a silver color. The patented design based on cutting edge technology gives longer life, and better performance. Fast acceleration, and level flight characteristics, allows for reduced fuel consumption and makes it run quieter. Fits all standard trimmer heads.

From the Manufacturer

Husqvarna 639 00 51-02 TitaniumForce 1/2 lb .095. The Husqvarna 639 00 51-02 TitaniumForce 1/2 lb .095 is a commercial grade co-polymer trimmer line in a silver color. The Husqvarna 639 00 51-02 is a patented design based on cutting edge technology gives longer life, and better performance. The TitaniumForce thread has fast acceleration, and level flight characteristics, which allows for reduced fuel consumption and makes it run quieter. The Husqvarna 639 00 51-02 TitaniumForce 1/2 lb .095 fits all standard trimmer heads.

iPower is the leading manufacturer of grow light systems; supplying gardeners, worldwide, for over a decade. We use the transformative power of light to make gardening more efficient and productive. In addition to HPS/MH and Ceramic MH technology, we offer digital ballasts, fluorescent, and LED lighting systems. From hobbyist to commercial applications, we offer a broad spectrum of gardening tools and equipment in hydroponics, irrigation, climate control, and structures to help your garden thrive.

iPower Ventilation Ducting is made from high quality aluminum to provide flexibility and protect against breaking during installation. Not only does the duct act as in intake and exhaust piping for active-cooled fixtures and reflectors, but also stores and dissipates heat at a steady rate, which reduces room temperature fluctuations.

Benefits of iPower Ducting:

1. This 4-inch ducting fits any standard 4-inch inline fan.
2. 3-layer thickness: Aluminum Foil + PET + Aluminum Foil.
3. Helically shaped and internally crimped galvanized steel strip.
4. Interlocking steel strips to form an air tight and leak proof system.
5. Each ducting unit includes a pair of metal clamps made from stainless steel.
6. This air duct is easy to cut using a pair of metal snips or a standard wire cutter.
7. This ducting is easy to bend to install in hard to reach spaces such as grow rooms, attics, crawl spaces, etc.
8. This ducting is made with aluminum reinforced with a spiral-wire, designed to prevent the ducting from unraveling when cut into smaller pieces.
9. Typical applications for ventilation ducting include: dryer room vents, A/C or Heater ducting, grow room ventilation and other indoor gardening applications.
10. 12-month manufacturer warranty.

.095-inch Diameter Round Trimmer Line. 855-Foot length. Maxpower RoundCut trimmer line is made from sturdy nylon components and is great for homeowner/residential use. This trimmer line is proudly manufactured in the USA and provides consumers with a quality cutting line and an economical price.