Nowadays, there are so many products of dual tap kegerator conversion kits in the market and you are wondering to choose a best one.You have searched for dual tap kegerator conversion kits in many merchants, compared about products prices & reviews before deciding to buy them.
You are in RIGHT PLACE.
Here are some of best sellings dual tap kegerator conversion kits which we would like to recommend with high customer review ratings to guide you on quality & popularity of each items.
990 reviews analysed
1. Kegco D4743DT-SS Double Tap SS Draft Beer Kegerator Tower – 3" Diameter
- Kegco Quality 304 Stainless Steel Beer Tower with Two Chrome Faucets
- 3″ Diameter Premium Quality 304 Stainless Steel Column
- Used with Air Cooled Beer Dispensing Systems
- Two Kegco Chrome-Plated Brass Faucets Installed
- Two 5′ Lengths of 3/16″ Clear Beer Tubing with Nozzle and Hex Nut Assemblies
This is a Polished Stainless Steel Single Column, Double Faucet, 3″ Diameter Draft Tower. This tower comes complete with two chrome-plated beer faucets and two separate 5″ lengths of 3/16″ clear beer tubing with nozzle and hex nut assemblies. It will connect to all standard keg couplers.
2. Dual Beer Tower Dispenser – Draft Kegerator Tower Beer Dispenser Kit with 2 Faucet Tap Handles & Caps, Hose, Keg Wrench
- DOUBLE YOUR POURING POWER: Limiting yourself and your guests to pouring one beer on tap at your in-home bar is time consuming and frustrating
- The G. Francis Double Tap Draft Beer Tower is a beer faucets accessory that will double your pouring power and give your bar the finished feel you have been longing for
- USE YOUR EQUIPMENT: Inside lined with foam sheet for cooled tower systems insulation
- Tower stands 13.25 inches (33.7cm) tall (not including 3.1-inch/7.9cm tall tap handles) and has a 3-inch (7.6cm) diameter and 4.5-inch (11.4cm) base diameter
- 2.75-inch (7cm) center-to-center mounting hole distance (fits standard 3-inch/7.6cm hole pattern)
- Includes 2 separate 5-foot (1.5m) lengths of 3/16-inch (4mm) inside diameter (ID) (7/16-inch / 11mm OD) clear beer tubing with a 4.5-foot (1.4m) reach
- BUILT TO LAST: Constructed from polished silver stainless steel hardware and components, hard plastic faucet knob tap handles, and soft rubber faucet cap sanitary covers for maximum strength and longevity that resists rust and corrosion while preventing scratches and other damage
- Transparent hose is FDA approved 21CFR 175.300 PVC
- KEEP OUT CONTAMINANTS: Black faucet cap sanitary covers are the most simple and effective way to keep the faucets clean and are an essential part of draft faucet hygiene as it protects the faucets from insects and bacteria that could otherwise make their way into the spout of the faucet and into your drink
- Faucets (tap handles) are threaded and removable for easy cleaning and sanitizing
- PACKAGE CONTENTS: This beer faucet accessories package includes (1) double tap draft beer tower, (2) beverage tap flow control faucets, (2) faucet covers, (4) mounting hardware bolts, (1) tower gasket, (2) hose drink tubes, hose clamps, and a multi-purpose keg faucet wrench for your convenience
- Keg couplers required, not included
3. Single Tap Chrome Draft Beer Kegerator Tower – 2 1/2" Diameter
Draft beer towers are a simple and economical solution for your home bar. They look great mounted on your bar or countertop and function just like those at your favorite bar. This is a single tap model with a chrome finish (2 1/2-inch diameter). Comes with matching chrome plated faucet with brass lever and black plastic faucet knob (tap handle). In stock and ready to ship. Features: Beautiful chrome finish. Single faucet (included). Includes beer line and fittings. Specs: Dimensions: 2 1/2″ D with 3 1/2″ D base flange and cover 11″ H and 9″ H from counter to bottom of faucet. . Includes: 4′ of beer line with hex nut connectors. Mounting gasket. Chrome plated faucet with brass lever. Black plastic faucet knob (tap handle).
4. Kegco Deluxe Door Mount Kegerator Conversion Kit with 5 lb. Co2 Tank EBDCK-5T
- DUAL GAUGE REGULATOR: Durably constructed to deliver a consistent flow pour after pour, this Kegco 762 Commercial Grade Double Gauge Regulator features a T-style adjustment valve that makes it easy to adjust the pressure inside of the keg. The gauge on top of the regulator indicates CO2 pressure in the keg, while the gauge on the side indicates the remaining volume of CO2 gas. A pressure release valve is conveniently located on the body.
- LEVER HANDLE KEG COUPLER: This NSF-approved Kegco KT85D-L “D” System Keg Coupler features a sturdy nickel-plated forged brass body with a stainless steel probe, and is designed for use with all domestic brand American D system Sankey kegs. The lever-handle design is easy to use – simply pull out and then down on the handle to couple the keg. A 55-psi pressure relief valve makes this coupler even more convenient to use, allowing over-pressurized gas to escape before it enters your keg.
- DOOR MOUNT STAINLESS STEEL DRIP TRAY: Our 6″ x 4″ door mount drip tray’s clean design, durable stainless steel construction, and attractive brushed finish have made it a favorite of beer lovers. Hassle-free from start to finish, this drip tray can be quickly and easily mounted using the two screw holes in the backsplash, and when you’re done dispensing for the day, a removable grill makes clean-up a breeze. This drip tray does not have a drain, so it will need to be emptied manually.
- HEAVY DUTY FAUCET WRENCH: Make repairs and adjustments to your draft beer system like a pro using this heavy-duty faucet wrench. This durable metal wrench has a vinyl coated red or blue handle that provides an easy grip while loosening or tightening shank collars, allowing you to quickly attach or remove your faucets without scratching them.
- INCLUDES EMPTY 5 LB. ALUMINUM CO2 TANK: All of our brand new tanks are made from high strength aluminum alloy which is not as heavy as a steel tank and will not rust! These eye-catching tanks have a glossy red coating that acts as an extra layer of protection against corrosion and wear.
With this Deluxe Kegerator Conversion Kit, Kegco provides everything you’ll need to quickly convert your refrigerator into a beer dispenser and begin dispensing delicious cold draft beer! From the durable commercial grade double gauge regulator to the NSF approved commercial-grade American D System keg coupler, every part is high quality and built to last, so you can dispense your own beer for years to come. We’ve even included a stainless steel drip tray that contains any drips, so cleaning up after every use is just as easy as the initial assembly! Detailed instructions are included in every kit.
5. BACOENG A Tap Kegerator Door Refrigerator Conversion Kit No Tank
- 1. DUAL GAUGE REGULATOR: This unit weighs about 3 pounds and includes 2 rubber protective covers. It always tell you working pressure and tank pressure with pinpoint accuracy. A convenient knob style pressure dial that can be adjusted without tools. Shutoff valve with built in spring loaded check valve to prevent beer from flowing backward into the gas lines.
- 2. HANDLE D-SYSTEM KEG COUPLER: D-System Keg Coupler features a sturdy nickel-plated forged brass body with a stainless steel probe, and is designed for use with all domestic brand American D system Sankey kegs. The lever-handle design is easy to use – simply grip the handle and then down on the handle to couple the keg. A 55-psi pressure relief valve makes this coupler even more convenient to use, allowing over-pressurized gas to escape before it enters your keg.
- 3. CHROME BEER FAUCET WITH BRASS LEVER: Featuring a forged brass body and highly polished chrome finish, this beer faucet puts a stylish finishing touch on your kegerator at a price you’ll love.The brass shaft assembly and lever includes a non-stick ball washer for smooth operation, and the lever has standard threading that is compatible with most branded tap handles. This 4-1/8″ long beer shank with nipple assembly is constructed from chrome-plated brass and can be mounted through a 1″ hole.
- 4. METAL BEER FAUCET WRENCH: This beer faucet spanner wrench is an essential tool that allows you to quickly and confidently loosen or tighten shank collars without scratching your faucets.
6. Double Tap Draft Beer Tower- Stainless Steel- 3" Diameter
7. Bev Rite CTT4-186 4 Product Draft Beer Kegerator T Tower, Stainless Steel Body 4 Faucets
Made in USA with High Quality Stainless Steel (#4 polish) box. Has a 3-inch diameter round polished SS Column and flange. Comes with 5′ of beer lines with connections on the ends. Dimensions: Box is 13″ L x 5″ W x 4″ H Column: 10.5″ H Overall height including the box is 14.5″.
8. Upright Slim Chrome Beverage Tower, Kegerator, Countertop – Single Faucet
This clean and modern looking is a great addition to any Kegerator, Bar or countertop. Perfect for dispensing Beer, Water or other beverages. It is very simple to install and ready in minutes. Just drill a 7/8″ hole, insert the tower and screw on from the bottom side. The bottom flange is a little over 2″ wide. Mounting shank is 4″ long. Includes Chrome plated brass faucet, black faucet knob, 5′ of beer tubing with connections and installation hardware.
9. DOUBLE TAP DRAFT BEER TOWER – 2-TAP BEER COLUMN 13” HIGH 3” DIAMETER – STAINLESS STEEL BODY WITH UNIQUE BLACK SATIN FINISH – CHROME FINISH FAUCETS – BEERGON BT-1000
- TIRED OF THE SAME LOOKING BEER TOWER? BEERGON DOUBLE TAP DRAFT COLUMN is made of premium stainless steel with a unique black satin finish so you can distinguish yourself from your friend’s beer dispenser.
- YOU WISH THAT SOMETIMES YOU HAD A DIFFERENT BEER FLAVOR? NOW YOU CAN ! HAVE 2 beer FLAVORS poured from the same beer tower system at the same time ! It has high quality FDA-safe beer line (3/16” ID, 7/16” OD) that will not impart plastic flavors.
- YOU ARE WORRIED THAT IT MAY BE COMPLICATED TO INSTALL YOUR NEW TOWER? DO NOT FRET ! BEERGON DRAFT BEER TOWER IS SUPER EASY TO INSTALL on your tabletop and comes with all the hardware necessary to secure this column on your counter.
- ARE YOU CONCERNED THAT THE BEER TAPS WILL RUST? RELAX ! BEERGON BEER TAPS ARE SOLIDLY MADE and are installed and used in many bars and do not show signs of rust over many years !
- YOU THINK THAT A STANDARD 12-INCH TALL TOWER IS NOT HIGH ENOUGH FOR YOU? GOOD NEWS ! WE HAVE ADDED AN EXTRA INCH. Enjoy your 13-inch tall beer tower by pouring your beer into your extra-tall mugs !
BEERGON Beer Tower BT-1000 is made of premium stainless steel with a black satin finish so you can distinguish yourself from your friend’s beer towers. This double tap tower for your home allows you to have 2 beer flavors poured from the same tower at the same time and is equipped with a high quality FDA-safe beer lines (3/16” ID, 7/16” OD) that will not impart plastic flavors. BEERGON DRAFT BEER TOWER is super easy to install and comes with all the hardware necessary to secure this column on your counter. BEERGON BEER TAPS are solidly made and installed and used in many bars and do not show signs of rust over many years ! GET YOUR BEERGON BEER TOWER NOW, YOU DESERVE IT !
INSIDE THE PACKAGE:
One (1) beer tower cooler insulator
Two (2) faucets/taps
Two (2) tap handles (black)
Two (2) springs already inside the faucets
Two (2) 3-feet long beer lines already installed;
One (1) wrench
One (1) washer for the column base
Four (4) bolts to secure the base on the counter
Column height: 13”
Column diameter: 3”
Base diameter: 4-3/16”
Height from base to bottom of tap: 10”
Height from base to top of tap handle: 16.25”
FDA-safe beer lines (3/16” ID, 7/16” OD)
Faucet finish: Polished Chrome
Tower body color: Black satin
10. Kegerator Tower Cooler for Beer Tower – Neoprene Design – Perfect Fit for Kegerator Tap Tower – Easy to Use Beer Tower Cooler Accessory (3.0" Diameter x 11.5" Height Double Tap Beer Tower)
- MAINTAINS ICY COLD BEER TOWERS: Ensure that every pour from your draft beer tower comes out icy cold. Even the first! Insulate your tower with this simple to use kegerator Tower Cooler accessory.
- END FOAM NOW: Maintain a constant temperature throughout your kegerator system with a Tower Cooler Chiller. Beer warms rapidly through a poorly insulated beer tower causing foam to form…in your cup!
- SAVE ELECTRICITY WITH LITTLE EFFORT: The added insulation of a Tower Chiller will reduce kegerator energy consumption.. Unlike kegerator tower cooler fans, the Tower Chiller takes seconds to install.
- MINIMIZE CONDENSATION: Kegerator towers sweat. Condensation buildup is a sign of poor insulation and will lead to corrosion and rust. Increase the lifetime of your kegerator and protect your beer tower.
- HIGH QUALITY MATERIAL AND BUILD: Crafted from high quality neoprene with heavy-duty double stitching. Easy to clean and guaranteed to last. 3” Diameter and 11.5” Height. Ideal for double tap beer towers.
By our suggestions above, we hope that you can found Dual Tap Kegerator Conversion Kits for you.Please don’t forget to share your experience by comment in this post. Thank you!