Finding your suitable readers for dryer vent building codes is not easy. You may need consider between hundred or thousand products from many store. In this article, we make a short list of the best readers for dryer vent building codes including detail information and customer reviews. Let’s find out which is your favorite one.
597 reviews analysed
1. Builder’s Best BDB110050 Semi-Rigid Dryer Vent Kit with Close Elbow, Silver
Description
This Builder’s Best Semi-Rigid Dryer Vent Kit with 2 Close Elbows features an all-aluminum duct. This kit complies with all dryer manufacturer recommendations and most building codes. It includes everything you need to connect most dryer venting situations.
2. Systemair Dryer Booster Kit with Fan DBF 4XL Fantech
3. Deflecto Extra Heat Dryer Saver, Accommodates 4" Transition Ducts, Includes 2 4" Plastic Clamps, White (EX12)
Feature
- Save the heat from your clothes dryer and divert it into your home with our Extra Heat Dryer Saver
- Accommodates 4” diameter dryer ducts
- Adjustable flap deflects heat and humidity inside during cold weather and deflects them outside during warm weather
- Saves energy and money
- Clean filter screen after each use for optimal performance and safety
- Do not vent gas clothes dryers into bathrooms or bedrooms
- Some building codes may restrict the use of this product, always check the local codes in your area
- Open doors in small rooms for adequate distribution of heat and moisture
- Use with UL listed Supurr-Flex clothes dryer transition duct (not included)
- Product Dimension: 7.875 X 5.875 X 5.375 Inches
Description
Product Description
Save energy and money with our Extra Heat Dryer Saver, an inline diverter that deflects the heat and humidity from your dryer’s exhaust into your home. An adjustable flap allows you to bring the warm air in during the colder months or send it outside during the warmer months. Attach standard dryer transition ducts (not included) to the 4” diameter openings with the included 4” plastic clamps. Clean filter screen after each use for optimal performance and safety. In small rooms, open the doors for adequate distribution of heat and moisture. Please follow these safety warnings: Do not vent gas clothes dryers into bathrooms or bedrooms. Some building codes may restrict the use of this product, always check the local codes in your area. Deflecto was founded on innovative, problem solving products. For over a half century, we have built a tradition of discovering and meeting needs with invention and dependable manufacturing. Today, Deflecto is the world’s largest chair mat, bicycle reflector and dryer venting manufacturer and a global leader in sign and literature holders, office workspace accessories and other air distribution products.
From the Manufacturer
Deflecto Ex12 Heat Saver & Lint Trap; Converts Clothes Dryer Into Extra Source Of Heat; Includes Diverter To Allow Exhausting Outside During Warmer Weather
4. Tjernlund LB2 Dryer Duct Booster with Status Panel UL-705 Listed DEDPV
Description
The Fantech dryer exhaust fans have been specially designed to solve the problems caused by long duct runs on clothes dryers. According to dryer manufacturers and some local building codes, exhaust fans should be added in the dryer duct run when the length of the duct exceeds 35 feet with no bends, 30 feet with one bend or 25 feet with two bends.
5. EVE6 Undereve Vent
Description
EVE6 Undereve Vent
6. Suncourt DEDPV Patented Centrasense Technology Dryer Booster Fan Kit UL-705 Listed (DRM04)
Feature
- SAVES ENERGY – Uses current sensors rather than pressure sensors, which increases efficiency and provides the fastest response time in the market. It is the only DEDPV fan on the market to synchronize its operation without periodic interruption, extra calibration cycles, or extended run-time.
- EASY TO INSTALL – This Dryer Vent Kit can be installed in ANY orientation and requires no calibration, which makes installation of this product easy and efficient.
- USA ASSEMBLED – This item is assembled and calibrated in the USA.
- DESIGNED FOR COMPLIANCE – UL705 DEDPV performance certified AND meets the IRC2015 building code. Note: Only approved for installation for electric clothes dryers and must be AT LEAST 25 equivalent feet for this kit to make the dryer operate more efficiently.
- ELECTRICAL BOX OR FLUSH-MOUNT OPTIONS – Is the only DEDPV fan kit with a remote indicator purpose-built for flush-mount or standard electrical box mounting.
Description
Only DEDPV fan kit in the market: To run the full cycle of the dryer rather than resorting to periodic on/off cycling. That can be installed in any orientation with no calibration needed. That allows for flush mounted remote indicator. The DRM04 Dryer Booster Fan Kit is a Dryer Exhaust Duct Power Ventilator (DEDPV) designed for compliance to UL Standard 705. Any UL705 DEDPV is only suitable for residential electric clothes dryers employing 4” ductwork. Suncourt accepts no responsibility for use of this product in other applications. DRM04 Kit Contains:(x1) TFM04 4” corded metal centrifugal fan with monitor(x1) TFR100 remote operation indicator(x1) English and French TFR100 warning card(x35’) of 22 gauge 5-conductor wire(x1) CS100 clip-on clothes dryer current sensor with 6’ cord(x2) 4” metal cleanout sleeves with band clamps(x4) self-adhesive foam strips (to limit vibration transferred to ductwork) Screwpack Contents: (x4) 1/4” x 1 1/2” lag bolts (mounting the fan) (x4) 1/4” washers (mounting the fan) (x4) 3/8” rubber grommets (lag bolt vibration isolation) (x2) 6-32 x 1 1/2” machine screws (for mounting remote indicator to electrical box) (x2) #6 x 1 1/2” sheetmetal screws (for mounting remote indicator flush to drywall) (x2) #6 7/8” long wall anchors (for mounting remote indicator flush to drywall) (x3) self-adhesive cord clips (for securing low-voltage signal wiring) Tools / supplies you will need: 3/16” drill bit (wall anchors if remote is flush-mount, pilot holes for lag bolts). 7/16” socket and ratchet (to tighten lag bolts). Phillips screwdriver (for mounting remote indicator). Flathead screwdriver or 5/16” nut driver (for cleanout band clamps). Sheetmetal shears. Foil duct tape. Wire cutters (to cut slot in operation indicator if flush-mounted). Wire strippers (to cut low-voltage wire to length and strip if need
7. Hon&Guan 3” Air Vent Louver, Air Grill Cover with Built-in a Fly Screen for Bathroom Office Home (ø75mm)
Feature
- Louvre air vent make of high quality ABS.
- Diameter 75mm, sleeve height 70mm.
- Hon&Guan extractor vent outlet has a fine mesh to prevents mouse birds from entering your home and a weather seal to prevent unwanted leaks and drafts.
- Panel and black sleeves are detachable,easy to clean and maintain.
- Wall mounted or celling mounted,perfect for bathroom,office,room exhaust and ventilation use.
8. Dundas Jafine BPC425R6 Insulated Flexible Duct with Black Jacket, 4-Inches by 25-Feet
Feature
- 4″ x 25′ Length
- R6 Insulation value. Required minimum in many building codes across the country
- Polyethylene jackets provide a durable, scuff-resistant vapor barrier that provides improved protection against damaging ultra-violet light.
- Installation is made easy with the reinforcing fiberglass yarn scrim, which acts as a rip-stop and prevents tearing
- Rigorously tested by Underwriters Laboratories, Inc. in accordance with UL 181, The Standard for safety in Factory-Made Air Ducts and Air Connectors.
9. Deflecto Dryer Lint Trap Kit, Supurr-Flex Flexible Metallic Duct
Feature
- Not Applicable
- Imported
- Designed for safe indoor dryer venting where outside venting is impossible
- Quick, easy installation, fits most clothes dryer (not for use with gas dryers)
- If used in small rooms, open doors for adequate distribution of heat and moisture
- Lint trap requires 4 cups (32 oz.) of water for use
- Transition duct, 2 clamps and lint trap are included
Description
Product Description
“
Product Description
Indoor dryer venting Supurr-Flex UL listed 2158 clothes dryer transition duct non-tipping 2 clamps 4′ dia x 5-ft length foil duct built-in hanger. Designed for safe indoor dryer venting where outside venting is impossible. Quick, easy installation, fits most clothes dryer (not for use with gas dryers). If used in small rooms, open doors for adequate distribution of heat and moisture. Lint trap requires 4 cups of water for use. Transition duct, 2 clamps and lint trap are included. Imported.
From the Manufacturer
This is a genuine replacement part. The model number and name for the following item is: Deflecto LTF Lint Trap.
“
From the Manufacturer
This is a genuine replacement part. The model number and name for the following item is: Deflecto LTF Lint Trap.
10. Speedi-Products EX-AFP 424 4-Inch x 2-Foot Semi-Rigid Push-Fit Duct, Silver
Feature
- Speedi-Exhaust Products are made in the USA
- Ideal for non insulated general purpose venting systems
- Multi-ply metalized polyester and aluminum polyester laminate with steel wire support
- Seal joints with approved duct mastic sealants and tapes
- Consult your local building codes for approved installation practices
Description
Product Description
Speedi-Products EX-AFP 424 4-Inch x 2-Foot Semi-Rigid Push-Fit Duct, Silver
From the Manufacturer
Speedi-Products 4-Inch by 24-Inch Round Aluminum Foil Pipe with Push Fit Connectoin. Used in non insulated general purpose venting systems. Multi-ply metalized polyester and aluminum polyester laminate with steel wire support. Can be used for Remodeling, Do it yourself and New Residential projects.
Conclusion
By our suggestions above, we hope that you can found Dryer Vent Building Codes for you.Please don’t forget to share your experience by comment in this post. Thank you!
