The Best Doorwindow Permanent Hurricane Anchoring

590 reviews analysed

1. The Hillman Group 831494 1/4 X 2-Inch Stainless Steel Hurricane Bolt, 100-Pack

The Hillman Group 831494 1/4 X 2-Inch Stainless Steel Hurricane Bolt, 100-Pack

Feature

Description

Product Description

Hurricane Bolts are made of strong bad durable stainless steel. They are ideal for installing hurricane panels to storefronts and sliding glass doors. Normally used in conjunction with lead anchors.

From the Manufacturer

Hurricane Bolts are made of strong abd durable stainless steel. They are ideal for installing hurricane panels to storefronts and sliding glass doors. Normally used in conjunction with lead anchors.

2. The Hillman Group 831487 1/4 X 1-Inch Stainless Steel Hurricane Track Bolt, 100-Pack

The Hillman Group 831487 1/4 X 1-Inch Stainless Steel Hurricane Track Bolt, 100-Pack

Feature

Description

Product Description

Hurricane track bolts are used in any of the F Tracks (sill tracks) to secure your panel(s) or wind screens. The track bolts have a square head that slides into the track allowing you set the location of the fastener where ever it’s needed. Used for protection from hurricanes.

From the Manufacturer

Hurricane track bolts are used in any of the F Tracks (sill tracks) to secure your panel(s) or wind screens. The track bolts have a square head that slides into the track allowing you set the location of the fastener where ever it’s needed. Used for protection from hurricanes.

3. The Hillman Group 831489 1/4 X 3/4-Inch Stainless Steel Hurricane Bolt, 100-Pack

The Hillman Group 831489 1/4 X 3/4-Inch Stainless Steel Hurricane Bolt, 100-Pack

Feature

Description

Product Description

Hurricane Bolts are made of strong bad durable stainless steel. They are ideal for installing hurricane panels to storefronts and sliding glass doors. Normally used in conjunction with lead anchors.

From the Manufacturer

Hurricane Bolts are made of strong abd durable stainless steel. They are ideal for installing hurricane panels to storefronts and sliding glass doors. Normally used in conjunction with lead anchors.

4. PLYLOX Hurricane Window Clips 20 Pack (Carbon Steel, 1/2")

PLYLOX Hurricane Window Clips 20 Pack (Carbon Steel, 1/2")

Feature

5. The Hillman Group 831493 1/4 X 1-1/2-Inch Stainless Steel Hurricane Bolt, 100-Pack

The Hillman Group 831493 1/4 X 1-1/2-Inch Stainless Steel Hurricane Bolt, 100-Pack

Feature

Description

Product Description

Hurricane Bolts are made of strong bad durable stainless steel. They are ideal for installing hurricane panels to storefronts and sliding glass doors. Normally used in conjunction with lead anchors.

From the Manufacturer

Hurricane Bolts are made of strong abd durable stainless steel. They are ideal for installing hurricane panels to storefronts and sliding glass doors. Normally used in conjunction with lead anchors.

6. Hillman 707319 Zinc Die-Cast Washered Wing Nuts (1/4"-20) – 50 pieces

Hillman 707319 Zinc Die-Cast Washered Wing Nuts (1/4"-20) - 50 pieces

Feature

Description

Size:pack of 50

Product Description

Wing Nuts can be used where frequent fastener connection adjustments or removals are needed and can be made quickly and often. Tools are not needed to install this product; to tighten simply turn the nut by hand.

From the Manufacturer

Wing Nuts can be used where frequent fastener connection adjustments or removals are needed and can be made quickly and often. Tools are not needed to install this product; to tighten simply turn the nut by hand.

7. HIDBEA UV Blocking Window Film Heat Control One Way Glass Tint for Home | Mirror Reflective Effect | | Daytime Privacy Protection | Static Cling, 23.6 Inch x 6.5 Feet, Black-silver

HIDBEA UV Blocking Window Film Heat Control One Way Glass Tint for Home | Mirror Reflective Effect | | Daytime Privacy Protection | Static Cling, 23.6 Inch x 6.5 Feet, Black-silver

Feature

Description

Color:Black-silver |  Size:23.6 Inch x 6.5 Feet

To enjoy the light while not allowing others to see inside, the window tint film provides daytime privacy to you, just like a privacy curtain only in daytime. Anti glare, thermal windows must unbearable in summer, this window insulation kit has sun block effect. Widely used for residential, home, office, hotels, house, and applicable to any smooth or flat glass surface, like window, sliding door, balcony, etc. Specifications Material: vinyl, no glue Length: 6. 5 Feet (200cm)Width: 23. 6 Inch (60cm)IR rejection: 88% UV rejection: 91%vlt: 13%Note: 1. One-way daytime privacy depends on the light intensity. In general, people inside can see through the glass window tint, while people outside can’t see people inside during daytime due to the strong sunlight outside; when indoor light is stronger than outdoor at nighttime, people outside can see people inside. Remember to draw curtain during night. 2. Different effect between daytime and night: the outside glass will show a mirror effect and keep your privacy only during daytime. 3. Mirror effect: the mirror effect we said means it has a slightly reflective effect, not totally like a mirror. Installation guide: 1. Cut the pieces of film so they measure about 1/2 inch larger than the window panes being covered. 2. Peel off the transparent back side of the film. 3. Generously spray enough water/dish washing liquid mix with water onto the window surface. The water makes it easier to position the film and helps hold it on the window. 4. Apply from top to bottom, for large size window, two people is recommended. 5. Use squeegee cover with transparent back sheet or soft cloth/tissue (to avoid scratches) to push the bubbles out. We have installation kit for sale. 6. Trim the extra film. Tips: 1. Newspaper or waste paper is ideal to remove tiny spots on window surface, these spots will create bubbles on your finishing. 2. Generously spray dish washing liquid water onto the exposed back side of the film makes the separation easier. 3. Be sure the window is dripping wet, if it becomes dry, rewet it completely before applying film. 4. Apply in early morning or late evening when the glass is cooler to avoid bubbles/spots. 5. Please make sure to leave 2mm (0. 08 inches) Gap between the film and the window frame since there are sealant glue or painting residue left on the corner. When heat expands, the film will easily fell off.

8. Defender Security U 10827 Door Reinforcement Lock – Add Extra, High Security to Your Home and Prevent Unauthorized Entry – 3” Stop, Aluminum Construction (Satin Nickel Finish)

Defender Security U 10827 Door Reinforcement Lock – Add Extra, High Security to Your Home and Prevent Unauthorized Entry – 3” Stop, Aluminum Construction (Satin Nickel Finish)

Feature

Description

Color Name:Satin Nickel

Product Description

Add an extra layer of security to your home with this U 10827 door reinforcement lock. Designed to withstand 800 lbs. of force, you can rest easy knowing your family is safe and protected! This reinforcement lock has a spring-loaded design, aluminum construction and a satin nickel finish. This satin nickel reinforcement lock can be quickly and easily installed on any swing-in door of any thickness, and can help ensure the door cannot be opened from the outside by being kicked in. Additionally, it’s tamper-resistant, so it can protect against lock picking and bumping. Plus, it’s child-safe, because you can install it higher on a door, where your young ones can’t reach. Installation takes minutes, and the U 10827 door reinforcement lock comes with 3” hardened screws. Extra home security and peace of mind are well within reach – and doesn’t have to come with the high price tag of an alarm system! This high security door lock meets the Texas building code requirements. Be sure to view the manufacturer’s How-To Installation Video also linked to this page, in the upper left hand corner.

From the Manufacturer

This entry door stop is constructed from aluminum and comes finished in satin nickel. It protects against unauthorized entry by preventing lock bumping and lock picking while in locked position. Fits any size door and has a child-safe design.

9. HighWind Solutions 1/4-20 x 1" Stainless Steel Track Bolt Hurricane by Mountwell Hardware (25 Pieces)

HighWind Solutions 1/4-20 x 1" Stainless Steel Track Bolt Hurricane by Mountwell Hardware (25 Pieces)

Feature

Description

Item Package Quantity:25

QUALITY.

The track bolts are made of 18-8 stainless steel construction, this will protect them from rust and corrosion and ensure the durability and longevity of the product.

PURPOSE.

The HighWind Solutions by Mountwell Hardware track bolts can be used in many applications.

However it is best utilized with “F” tack design hurricane panels and shutters.

INSTALLATION.

Installation is simple. Slide the head of the bolt into the “F” track slot and move to the desired position.

**Only tighten panels to the manufacturers specifications.**

THE MOUNTWELL HARDWARE GUARANTEE

We take pride in our product quality and craftsmanship and all of our products are backed by our 100% money back guarantee.

10. Hard-to-Find Fastener 014973281267 281267, 1/4-20″, 12 Anchors

Hard-to-Find Fastener 014973281267 281267, 1/4-20

Feature

Description

We stock a wide variety of fasteners ideal for many applications around the home, farm, business, automotive, and in industry. Most of our fasteners have a light zinc plating over steel giving a more rust resistant finish. We also sell coated and stainless products for additional rust resistance. We stock many grades of fasteners ranging from low carbon steel on up to hardened, heat treated steel. Not all fasteners are applicable for all applications so be certain to test thoroughly and get the opinion of a licensed builder or certified building or structural engineer before relying on these fasteners for any situations where failure would result in damage to property or person.

Conclusion

By our suggestions above, we hope that you can found Doorwindow Permanent Hurricane Anchoring for you.Please don’t forget to share your experience by comment in this post. Thank you!