Top 10 Door Spindle Hardware Parts

Finding your suitable readers for door spindle hardware parts is not easy. You may need consider between hundred or thousand products from many store. In this article, we make a short list of the best readers for door spindle hardware parts including detail information and customer reviews. Let’s find out which is your favorite one.

991 reviews analysed

1. Prime-Line Products E 2281 Passage Door Latch, 9/32 in. & 5/16 in. Square Drive, Steel, Brass Finish

Prime-Line Products E 2281 Passage Door Latch, 9/32 in. & 5/16 in. Square Drive, Steel, Brass Finish

Feature

2. PRIME-LINE E 2294 Vintage Style Indoor Mortise Lock Assembly Kit – Cast Steel Construction, Antique Skeleton Key – Backset, 1/4” Max Square Spindle – Reversible Latch Bolt

PRIME-LINE E 2294 Vintage Style Indoor Mortise Lock Assembly Kit – Cast Steel Construction, Antique Skeleton Key – Backset, 1/4” Max Square Spindle - Reversible Latch Bolt

Feature

3. Andersen Spindle, 3-3/4 Long, Frenchwood Hinged Door – 2579830

Andersen Spindle, 3-3/4 Long, Frenchwood Hinged Door - 2579830

Feature

Description

Andersen 3-3/4 Inch handle spindle for Frenchwood Hinged Patio Glass Doors.The spindle is used to connect the inside and outside handle.Spindle is inserted through the lock mechanism and attaches to the interior and exterior handles.Andersen Door Style: Frenchwood Hinged inswing and outswing doorsSpindle Diameter: 5/16 inchSpindle Length: 3-3/4 inch

4. Prime-Line Products E 2459 Prime Line Replacement Door Knob Spindle, For Use With Square Drive Systems, 3-1/2 In L, Pack of 1, Zinc

Prime-Line Products E 2459 Prime Line Replacement Door Knob Spindle, For Use With Square Drive Systems, 3-1/2 In L, Pack of 1, Zinc

Feature

Description

Product Description

These replacement spindles are used on vintage style door knob systems. They feature 3/8 in.–20 custom threading and come in a zinc plated finish. The nominal size of these shafts measure 1/4 in. x 1/4 in. x 3-1/2 in., but their actual size is 17/64 in. x 17/64 in. x 3-1/2 inches. This square spindle fits 9/32 in. and 5/16 in. square openings, but it will NOT fit into 1/4 in. square drives.

From the Manufacturer

This replacement spindle is used on antique style door knob systems. It features a 1/4in. square drive with a threaded shaft. It comes plated in a zinc finish.

5. Defender Security E 2537 Mortise Style Fluted Glass Door Knobs – Perfect for Replacing Broken Antique Lock Sets on Interior Doors, Features 2” Outside Diameter Knobs (Classic Bronze)

Defender Security E 2537 Mortise Style Fluted Glass Door Knobs - Perfect for Replacing Broken Antique Lock Sets on Interior Doors, Features 2” Outside Diameter Knobs (Classic Bronze)

Feature

Description

Color Name:Bronze

Product Description

If your door knob set is acting up or broken, this E 2537 Mortise style fluted glass door knob set is the perfect choice for updating and fixing hardware on interior doors. With a beautiful and classic fluted glass and bronze finish, it’s the perfect choice for your antique or vintage interior doors. Installation is a breeze, and the glass door knob set features 2” outside diameter knobs. These door knobs are for interior use only, and includes a 17/64 in. x 3-1/2 in. steel spindle with 3/8 in. -20 threads. This classic style door knob set fits square drive spindle systems commonly found in antique and vintage door hardware sets, and it can adjust to accommodate different door thicknesses. The diecast base on these knobs include the set screws for fastening the knobs to the square spindle, but it does NOT include any of the following components and they must be purchased separately: The internal mortise lock body, the door rosettes, the trim and strike plates, or the latch and fasteners. For matching rosettes see Prime-Line’s model number E-2543. Prime-Line Products does not currently manufacture a matching latch bolt, but you might consider using model number E-2497 which is a complete vintage mortise lock set in a classic bronze finish. Note: This item cannot be used on pre-bored doors that have large, newer style door knob holes without first prepping them to receive this hardware. Installation tip #1: Because the fasteners of the rosettes (purchased separately) require a solid surface to mount to, the large 2-1/8 in. (approximate size) holes must first be filled with a hardening filler, to then be able to receive the rosette fasteners. Products like Fix-It-All and Bondo Body Filler have worked well for some, but care must be used to avoid damaging any prefinished door surfaces during application and finishing. Installation tip #2: Apply a small amount of Loctite ThreadLocker 271 to the set screw threads in the event they are loosening – Loctite purchased separately.

From the Manufacturer

These knobs are made from glass and measure 2 in. in diameter. They have a die cast constructed base as used on interior and exterior locksets and a 1/4 in. square spindle. They come plated in classic bronze and fit most old style passage doors.

6. Defender Security E 2498 Vintage Style Door Knobs w/Satin Nickel Finish, 2-1/4 in. Outside Diameter, Steel

Defender Security E 2498 Vintage Style Door Knobs w/Satin Nickel Finish, 2-1/4 in. Outside Diameter, Steel

Feature

Description

Product Description

These vintage style door knobs are constructed of steel and come in a satin nickel finish. This set of knobs is designed for indoor use only, and it includes a 17/64 in. x 3-1/2 in. steel spindle with 3/8 in. -20 threads. This classic style knob set fits square drive spindle systems commonly found in antique and vintage door hardware sets, and it can adjust to accommodate different door thicknesses. The shanks on these knobs include set screws for fastening the knobs to the square spindle, but it does NOT include any of the following components and they must be purchased separately: The internal mortise lock body, the door rosettes, the trim and strike plates, or the latch and fasteners. For SOLID BRASS knobs, kindly see Prime-Line’s model number E 2297. Note: This item cannot be used on pre-bored doors that have large, newer style door knob holes without first prepping them to receive this hardware. *Installation tip #1: Because the fasteners of the rosettes (purchased separately) require a solid surface to mount to, the large 2-1/8 in. (approximate size) holes must first be filled with a hardening filler, to then be able to receive the rosette fasteners. Products like Fix-It-All and Bondo Body Filler have worked well for some, but care must be used to avoid damaging any prefinished door surfaces during application and finishing. *Installation tip #2: Apply a small amount of Loctite ThreadLocker 271 to the set screw threads in the event they are loosening – Loctite purchased separately.

From the Manufacturer

These knobs are constructed from solid brass and plated in satin nickel. They feature a 1/4 in. square spindle shaft. This style knob is used on various exterior and interior locksets.

7. Prime-Line E 2543 Door Knob Rosettes, 2-1/2 in. Outside Diameter, Steel, Classic Bronze Finish

Prime-Line E 2543 Door Knob Rosettes, 2-1/2 in. Outside Diameter, Steel, Classic Bronze Finish

Feature

Description

Product Description

These vintage style door knob rosettes are constructed of stamped steel and come in a classic bronze finish. This type of rosette is designed for indoor use only, and it is used with other vintage style hardware by Prime-Line Products and other classic hardware manufacturers. These rosettes feature an outside diameter of 2-1/2 inches, an inside diameter of 11/16 inches and have a 2 in. mounting hole center spacing. Note: If attempting to use these rosettes on doors with large, pre-drilled knob holes, the fasteners of these rosettes require a solid surface to mount to. The large 2-1/8 in. (approximate size) pre-bored *holes must first be filled with a hardening filler, to then be able to receive the rosette fasteners. *Installation tip #1: Products like Fix-It-All and Bondo Body Filler have worked well for some, but care must be used to avoid damaging any prefinished door surfaces during application and finishing. *Installation tip #2: Apply a small amount of Loctite ThreadLocker 271 to the set screw threads in the event they are loosening – Loctite purchased separately.

From the Manufacturer

These door knob rosettes are constructed from steel and come plated in classic bronze. They feature a screw mount design with a 2-1/2 in. diameter. These style rosettes fit on old style passage locks.

8. Defender Security E 2499 Door Knob Set with Spindle, Oil Rubbed Bronze,(Pack of 1)

Defender Security E 2499 Door Knob Set with Spindle, Oil Rubbed Bronze,(Pack of 1)

Feature

Description

Product Description

These knobs are constructed from solid brass and plated in classic bronzed. They feature a 1/4 in. square spindle shaft. This style knob is used on various exterior and interior locksets.

From the Manufacturer

These knobs are constructed from solid brass and plated in classic bronzed. They feature a 1/4 in. square spindle shaft. This style knob is used on various exterior and interior locksets.

9. Prime-Line Products Prime-Line E 2495 Mortise Keyed Knob – Perfect for Replacing Broken Antique Lock Sets and More, Fits 1-3/8 in-1-3/4 in. Interior Doors), Classic Bronze

Prime-Line Products Prime-Line E 2495 Mortise Keyed Knob – Perfect for Replacing Broken Antique Lock Sets and More, Fits 1-3/8 in-1-3/4 in. Interior Doors), Classic Bronze

Feature

Description

Color Name:Classic Bronze

Highlights: Finish: Oil Rubbed Bronze Material: Steel Security Grade: Grade 1 Backset Length: 2-3/8″ Maximum Door Thickness: 1-3/4″ Minimum Door Thickness: 1-3/8″ Indoor or Outdoor: Indoor and Outdoor Faceplate Material: Steel Door Direction: Left or Right Handed Trim Rings: Yes Commercial or Residential: Commercial and Residential Packaging Type: Carded

10. Defender Security E 2642 Colonial Style Door Knobs, 1/4 in. Square Drive, Wrought Steel Design, Brass-Plated Finish, with Spindles

Defender Security E 2642 Colonial Style Door Knobs, 1/4 in. Square Drive, Wrought Steel Design, Brass-Plated Finish, with Spindles

Feature

Description

These vintage style door knobs are constructed of steel and come in a brass-plated finish. This set of knobs is designed for indoor use only, and it includes one 2-3/4 in. steel spindle, and one 3-5/8 in. steel spindle with 3/8 in. -20 threads. This colonial style knob set fits 1/4 in. square drive spindle systems commonly found in antique and vintage door hardware sets, and with the two (2) provided square spindles, it can adjust to accommodate doors of different thicknesses. These knobs feature a wrought steel Colonial design, and they have a 2-1/4 in. outside diameter with a rope embossed design on their face. The knob shanks include setscrews for securing the knobs to the square spindle. All other components of matching vintage design must be purchased separately, to include the internal mortise lock body, the door rosettes, the trim and strike plates, or the latch and fasteners. Note: This item cannot be used on pre-bored doors that have large, newer style doorknob holes without first plugging them to receive this hardware. *Installation tip: Because the fasteners of the rosettes (purchased separately) require a solid surface to mount to, the large 2-1/8 in. (approximate size) knob holes must first be filled with a hardening filler, to then be able to receive the rosette fasteners. Products like Fix-It-All and Bondo Body Filler have worked well for some, but care must be used to avoid damaging any prefinished door surfaces during application and finishing.

Conclusion

By our suggestions above, we hope that you can found Door Spindle Hardware Parts for you.Please don’t forget to share your experience by comment in this post. Thank you!