The Best Clips For Hurricane Panels

These Hurricane Board-Up Clips are constructed of stamped steel and come unfinished. They are designed for fast and secure board-ups over windows on brick, wood and stucco surroundings that are sufficiently recessed in from the exterior finished surface, with 90-degree right angle surfaces adjacent to the windows for them to work. These clips help provide swift shielding of windows from high winds and dangerous airborne debris. Installation instructions are provided for use with 1/2 in. thick plywood, to include mounting and removal for storage and future use. Kindly refer to the Wind Speed Chart for proper count and spacing of clips to be used, based on wind speed and overall window sizes. The chart covers window sizes ranging from 24 to 96-inches wide, and for wind speeds up to 110-150mph. , all depending on overall window size opening.

These Hurricane Board-Up Clips are constructed of stamped steel and come in a zinc-plated finish. They are designed for fast and secure board-ups over windows on brick, wood and stucco surroundings that are sufficiently recessed in from the exterior finished surface, with 90-degree right angle surfaces adjacent to the windows for them to work. These clips help provide swift shielding of windows from high winds and dangerous airborne debris. Installation instructions are provided for use with 1/2 in. thick plywood, to include mounting and removal for storage and future use. Kindly refer to the Wind Speed Chart for proper count and spacing of clips to be used, based on wind speed and overall window sizes. The chart covers window sizes ranging from 24 to 96-inches wide, and for wind speeds up to 110-150mph. , all depending on overall window size opening.

EASY to install & remove – Simply install clips and push plywood into the window and press hurricane clips in place to securely fasten the window protection NO screws, nails, brackets or bolts that permanently damage your property HOLDS plywood in window casing to protect windows during high wind events LASTING – Store in a dry place and use again and again 10 CLIPS – Fits 1/4 inch to 1/2 inch plywood to hold in your window casing. The clips will work on blocks, brick, wood, stucco, vinyl, etc as long as you have a window casing that provides 2+ inches of space between the window and outside wall. The clips need enough room to grab the casing and hold the wood in place. Using Window Clips To help ease the process and to cut time, there is a product available that can make boarding easier and more effective: HURRICANECLIP window clips. Some facts about window clips:Available in a variety of economical package sizes and quantities.Clips securely attach to 1/2″ plywood which the fits into exterior window casings. No special tools, caulking, adhesives or glue required. Install and remove with one person.Clips create rigid, safe, temporary attachment of plywood to brick, wood, or stucco window casings. No nails, screws, bolts or brackets will permanently damage your property.Clips require no drilling into your home or window casingsClips hold plywood sheets in window casings as well or better than any hardware available today.Clips are rugged and will last year after year. If you move, take them with you. Installing the ClipsPlace the clips on each plywood cover (if the window is 24”x24” or smaller, only two clips are needed). – Each clip should be placed on the edge of the plywood cover no more than 24 inches apart. – Make sure the tension legs are facing towards you.Push the plywood covers with the clip tension legs to the outside firmly into the casing.Clips work as well in round windows as they do in rectangular windows.

EASY to install & remove – Simply install clips and push plywood into the window and press hurricane clips in place to securely fasten the window protection NO screws, nails, brackets or bolts that permanently damage your property HOLDS plywood in window casing to protect windows during high wind events LASTING – Store in a dry place and use again and again 10 CLIPS – Fits 1/4 inch to 1/2 inch plywood to hold in your window casing. The clips will work on blocks, brick, wood, stucco, vinyl, etc as long as you have a window casing that provides 2+ inches of space between the window and outside wall. The clips need enough room to grab the casing and hold the wood in place. Installing the ClipsPlace the clips on each plywood cover (if the window is 24”x24” or smaller, only two clips are needed). – Each clip should be placed on the edge of the plywood cover no more than 24 inches apart. – Make sure the tension legs are facing towards you.Push the plywood covers with the clip tension legs to the outside firmly into the casing.Clips work as well in round windows as they do in rectangular windows. Installing the ClipsPlace the clips on each plywood cover (if the window is 24”x24” or smaller, only two clips are needed). – Each clip should be placed on the edge of the plywood cover no more than 24 inches apart. – Make sure the tension legs are facing towards you.Push the plywood covers with the clip tension legs to the outside firmly into the casing.Clips work as well in round windows as they do in rectangular windows. You can adjust the number of clips used toaccount for different shapes and sizes of windows. Note: The new design will keep the clips on place even for thinner plywood. For additional stability – use small screw or nail to keep the clips in place when installing it to a board. Or you can use a pliers to tighten the opening of the clip to make it more secure.

The Dorcy 3AA 4 LED Incredible Floating Flashlight has a waterproof design with float-ability. Features include 55 lumens of light output, a beam distance of 31 meters, and a run time of over 8 hours. Shock absorbing rubber around the head and body allows for a slip-free, comfortable grip, ensuring stability and durability. The Incredible Floating Flashlight has a unique built-in tail cap carabiner clip and comes complete with 3 AA cell batteries.

Product Description

The Vornado 630 Mid-Size Whole Room Air Circulator continues Vornado’s superior benchmark performance with a new edge definition design. With its unique signature grill and deep-pitched propeller, the 630 moves air up to 70 feet while aerodynamically circulating all the air in a room. The 3-speed control, located on the side of the air circulator’s base, is easy to access and allows for speed selection to meet any circulation need. The base of the 630 provides added stability when operating from the floor or desktop. Use the 630 all year long in the home or office for added comfort and energy savings in every season. Backed by a 5-year limited warranty. Model is made for 120 volts only.

From the Manufacturer

IMPORTANT INTERNATIONAL DISCLAIMER: This item is built to meet U.S. voltage requirements and may not function properly when used in conjunction with external devices that alter or convert voltage or frequency of electricity. Improper use or shipping the product outside the U.S. will void all warranties.

Classic series 16 inch wall mount oscillating fan. This fan has 3 speed settings controlled by a turn switch. The fan has a 90 degree oscillation motion. There are two convenient pull cords for speed and oscillation control. It has a durable steel neck support with a 60 inch power cord. Be sure to unplug from the power source before cleaning

The Easy One Touch 4 provides a compact, versatile, and highly functional mounting solution. It offers a redesigned telescopic arm which extends up to 5 inches to provide users with even more viewing angles. Also included is an adjustable bottom foot that not only moves left and right but also up and down. As always, the Easy One Touch 4 includes the powerful biotite sticky gel pad. The Easy One Touch 4 has one last exciting feature: new compatibility. Phones up to an impressive 3. 5 inches will fit safely into this mount. Mount Smart. Drive Smarter! *Please note: if you have Lexus or Toyota Vehicles from the years 2003-2011 we highly recommend mounting on your windshield (state law permitting). You may also consider our Easy One Touch 4 Air Vent or Easy One Touch 4 CD Slot Car Mounts as additional options. Dottie will not be liable for any indirect, incidental, or punitive damages arising from the use of any biotite product. The biotite Limited does not, in any situation, cover the repair or replacement of property, including but not limited to, electronic devices and/or other personal property.