The Best Clear Undercoating 3M

Our 3M Sanding Block is a professional grade tool that helps you achieve your best, fastest sanding work in auto body and other jobs. The pliable rubber block is designed to comfortably fit your hand and to keep sandpaper flat against automotive surfaces, helping ensure uniform sanding performance. Sanding blocks feature internal attachment pins to hold sandpaper firmly in place on the block.

Permatex Super Weatherstrip Adhesive is a superior adhesive ideal for many applications including rubber, metal, auto or van carpeting and fabric-backed vinyl upholstery and automotive gaskets. This adhesive allows for repositioning parts after contact is made. As well as being waterproof, it also withstands extreme temperatures and resists gasoline, kerosene, antifreeze and most solvents. Permatex carries a wide selection of undercoating and rust products for auto body along with weatherstrip, trim, headliner and carpet adhesives for interior and trim repairs.

The POR-15 3-Step Stop Rust System is designed to stop rust on metal surfaces and ensures the best results when applying POR-15 Rust Preventive Coating. The clear-cut process allows for the proper cleaning, prepping, and coating of metal to create a non-porous surface that seals and protects metal from water, chemicals, and salt, and other corrosive contaminants. The POR-15 Stop Rust Kit covers a 6 square foot area with two coats making it ideal for small projects like sub frames, axle replacements, control arms, brake shields, etc. This kit contains POR-15 Cleaner Degreaser, POR-15 Metal Prep, POR-15 Rust Preventive Coating, paint brushes, latex gloves, and detailed instructions. Basic directions: Gloves, eye protection, and a properly fitted respirator should be worn whenever handling these products. STEP 1. Remove loose rust with a wire brush. Apply POR-15 Cleaner Degreaser to the surface, keep wet 10-15 minutes then rinse thoroughly with water and allow the surface to dry. For areas with noticeable build up use a stiff brush to break up material and continue to keep wet with POR-15 Cleaner Degreaser. It is important not to allow the product to dry on the surface prior to rinsing with water. POR-15 Cleaner Degreaser is a heavy duty water soluble cleaner that may be used over metal, wood, fiberglass, vinyl and concrete. STEP 2. Apply POR-15 Metal Prep to the bare metal surface, keep wet 10-15 minutes then rinse thoroughly with water and allow the surface to dry. It is important not to allow POR-15 Metal Prep to dry on the surface prior to rinsing with water. Once dry the surface may show a flash rust or white powdery residue this is perfectly normal. POR-15 Metal Prep provides the best surface profile and greatly improves paint adhesion to any type of metal surface. STEP 3. Apply two thin covering coats of POR-15 Rust Preventive Coating. Apply the first coat to the properly prepared substrate with the supplied brush. Apply the second coat when the first coat is almost dry, slightly tacky to the touch. If POR-15 Rust Preventive Coating is applied too heavy, brush marks may result in the finish. Do not apply this product if the humidity is above 70%. If the humidity is too high POR-15 Rust Preventive Coating will surface dry too quickly which may result in small bubbles in the finish. POR-15 Rust Preventive Coating requires a top coat only if exposed to direct sunlight. For top coating use POR-15 Top Coat or our two part topcoat POR-15 2K Urethane.

VHT SP229 Rust Convertor is a unique product designed to spray directly on rusted areas and stop rust from continuing. It sprays on clear and turns to a black metal protecting coating to prevent future rust from forming. Specifically formulated for application over metal, body filler, or fiberglass. Rust convertor sands to a smooth, even finish. Allow 24 hours to dry completely before applying top coat. Complete application instructions and curing information also printed on each can.

POR-15 Rust Preventive Coating is the Only Product that REALLY Stops Rust Permanently! POR-15 Rust Preventive Coating is designed for application directly on prepped rusted, sandblasted, and seasoned metal surfaces. It dries to a rock-hard, non-porous finish that won’t chip, crack, or peel, and it prevents rust from recurring by protecting metal from further exposure to moisture. POR-15 Rust Preventive Coating is sensitive to UV light and must be top coated when prolonged exposure to sunlight is possible. Top coating is not required for areas not exposed to sunlight.

3Mâ„ Undersealâ„ Undercoating is a totally new, rapid drying, rubberized undercoating material in an aerosol container. Designed for rust proofing and sound deadening; also for sealing fenders, quarter panels, door panels, repaired sections, welded joints, hoods, and decks. Easy to apply, and won’t plug nozzle.

BEST IN CLASS