Nowadays, there are so many products of brass push to connect fittings in the market and you are wondering to choose a best one.You have searched for brass push to connect fittings in many merchants, compared about products prices & reviews before deciding to buy them.
You are in RIGHT PLACE.
Here are some of best sellings brass push to connect fittings which we would like to recommend with high customer review ratings to guide you on quality & popularity of each items.
857 reviews analysed
1. Beduan Brass BPL Push to Connect Air Fittings Elbow 1/4" Tube OD x 1/8" NPT Male 90° Degree Adapter (Pack of 5)
Feature
- Type:Push in fitting/Push to connect /Size:1/4 ” Tube OD x 1/8″ NPT Thread
- Fluid Admitted:Air Vacuum Water (no freezing)
- Working Pressure:0-1.0MPa | 0-150psi/Applicable Tube:PU / PA / PE / PVC
- Proof Pressure:3.0Mpa | 435psi.Seal O-ring:NBR/ Lock Claw:Nickle-Plated Brass /Body:Nickle-Plated Brass
- Working Temperature:0-60°C | 32～140°F/Negative Pressure:-100Kpa | -29.5 In Hg
2. 1/4“od Push to Connect Fittings Pneumatic Fittings kit 2 Spliters+2 Elbows+2 tee+2 Straight 8pack (1/4" Combo)
Feature
- utah pneumatic: push to connect air and water Pressure Range: 0-1 Mpa145 psi Max pressure:1.5 Mpa/ 217 psi/15 bar Temperature Range 0-60°C | 32～140°F Applicable Tube: PU/NYLON/Soft PE hose fitting
- Easy to install This tube connector is available in various styles and models . Each model to serve its purpose. All models of push lock fittings are designed to suit your pneumatic piping needs perfectly
- You can easily change the tubing connector direction even after installation. The release ring of conforms with the ellipse design to ensure that the disconnecting of connect push is in good shape
- All push to lock contains internal hexagonal holes this enhances the installation process in a narrow space.push connect fittings Can be dismantled and assembled easily These Push In Fittings Meet The Pressures And Temperatures Mentioned
- At Extreme Temperatures In Places Close To Heat Sources we Would Recommend Our Connect Push Brass Which Is More Resistant To High Temperatures We Are Ready To Answer Any Questions Related To Our Connect It Fittings
Description
User’s Guide
1. Except air and water,don’t attempt to use the fittings on other fluids
2. The tube fitting is prohibited where spark and fire might be occurred
3. The tube fitting is prohibited if water temperature is above 60’C
4. Never apply tube joint with additional external load(bending,twist or
pulling),otherwise damage or leakage will be occurred.
Caution
Check the end of tubing for a right angle cutting and check the external surface of
tubing for any damage or scratch.Please refer to following instruction in connection
of tubing.When you insert the air tubing into the joint,you will have two-step
feeling.Section one is locking claw and section two is sealing ring.Must insert tube
into section two.
Sleeve is used in tubing connection and disconnection.The sleeve is designed as an
oval shape,which is covienient in assembly and disassembly.However,round sleeve is
available to met any special demand the product has limited space for oval
sleeve.After connection of tube joint and tubing,always try to pull tubing and ensure
its firm connection.
Always use proper tool to tighten external hexagonal and internal hexagonal parts of
the tube fitting.Always apply recommended torque on screws otherwise extra torque
might damage thread and cause air leakage while insufficient torque might cause
loose screws and air leakage.
After Screws are tightened,you may adjust the direction of tubing with most of our
tube joint.If it is hard in adjustment,you may apply recommended torque to turn
screw to adjust direction of tubing.
3. Beduan Pneumatic BPC Nickel-Plated Brass Push to Connect Air Fitting, 1/2" Tube OD x 1/4" NPT Male Thread Straight Push Lock Fitting (Pack of 2)
Feature
- Body Style: Male Straight / Size:1/2 “OD x 1/4” NPT Straight Union Connector
- Fluid Type:Air Vacuum,water,oil (no freezing)
- Working Pressure:0-1.0MPa | 0-150psi/Applicable Tube:PU / PA / PE / PVC
- Proof Pressure:3.0Mpa | 435psi.Seal O-ring:NBR
- Body:Nickel-Plated Brass.
- Working Temperature:0-60°C | 32～140°F ；Negative Pressure:-100Kpa | -29.5 In Hg
Description
Beduan Pneumatic Fittings are a compact one piece push-to-connect fitting.
All items in the Beduan Pneumatic composite range are silicone free.
The Nickel-Plated Brass gripping ring ensures excellent tube retention while the D seal
within the fitting provides a positive seal on the O.D. of the tube,
in both static and dynamic positions, due to an optimized design of the fitting cavity.
Beduan Pneumatic composite should not be used for live swivel applications
Body and collar are made of Nickel-Plated Brass, gripping ring is stainless steel, and D seal and O-rings are Nitrile.
4. Tailonz Pneumatic Male Straight 3/8 Inch Tube OD x 1/4 Inch NPT Thread Push to Connect Fittings PC-3/8-N2 (Pack of 10)
5. Utah Pneumatic 10 Pack Nylon & Nickel-Plated Brass Push to Connect Fittings Pc Male Straight 1/4"Od 1/4"Npt Thread Straight Connect Push Fit Fittings Tube Fittings Pneumatic Fittings (1/4od1/4npt)
Feature
- Type:Push In Male Connector. Size:1/4” Tube OD 1/4”NPT. Weight:18.5g
- Fluid Admitted:Air, Vacuum, Water (No Freezing)
- Working Pressure:0-1.0mpa | 0-150psi. Proof Pressure:3.0Mpa | 435psi
- Negative Pressure-100Kpa | -29.5 In Hg. Body:Nickel Plated Brass Seal, O-Ring NBR
- Working Temperature: 0-60°C | 32～140°F. Applicable Tube:PU / PA / PE / PVC
Description
Utah Pneumatic Fittings are a compact one piece push-to-connect fitting.
All items in the Utah Pneumatic composite range are silicone free.
The Stainless steel gripping ring ensures excellent tube retention while the D seal
within the fitting provides a positive seal on the O.D. of the tube,
in both static and dynamic positions, due to an optimized design of the fitting cavity.
Utah Pneumatic composite should not be used for live swivel applications.
Body and collar are made of Nylon 6.6, gripping ring is stainless steel, and D seal and O-rings are Nitrile.
6. Brennan PCNB2501-04-02 Nickel-Plated Brass Push-to-Connect Tube Fitting, 90 Degree Elbow, 1/4" Tube OD x 1/8" NPT Male
Feature
- 90-degree elbow for connecting two pipes or fittings at an angle
- Push-to-connect fitting connects to pipes or tubing on one end and has an NPT male connector on the other
- Made of nickel-plated brass for durability and corrosion resistance
- Working pressure of up to 290 psi
- Operating temperature ranges from -4 to 175 degrees F
Description
The Brennan PCNB2501 series 90-degree elbow fitting is made of nickel-plated brass and has tube and NPT male connectors. This 90-degree elbow fitting, or “ell,” connects two pipes at a 90-degree angle to change the direction of flow between pipes. It is a push-to-connect fitting that connects to pipes or tubing on one end and has a National Pipe Taper (NPT) male connector on the other. The fitting is made of nickel-plated brass for durability and corrosion resistance. The working pressure for this fitting is up to 290 pounds per square inch (psi), and its operating temperature ranges from -4 to 175 degrees F.
Pipe fittings are components used for connecting, terminating, controlling flow, and changing the direction of piping in many different industries. Push-to-connect compression fittings do not require tools or sealants, and are useful in installations where a heat source, such as a soldering torch, is prohibited. When purchasing pipe fittings, consider the application, as this will affect material type, shape, size, and required durability. Fittings are available threaded or unthreaded, in many shapes, styles, sizes, and schedules (pipe wall thickness).
Brennan Industries manufactures critical flow components. The company, founded in 1953 and headquartered in Solon, OH, meets International Organization for Standardization (ISO) 9001:2008 standards and its fittings meet Society of Automotive Engineers (SAE) specifications.
7. Metalwork Plastic & Nickel Plated Brass Push to Connect L Shaped 90 Degree Elbow Male Fitting, 3/8" OD x 1/4" NPT Male (Pack of 5)
Description
Fluid Type: Air
Operating Pressure: 0- 150 PSI / 0 – 9.9 kgf / cm2 (0-990kPa)
Working Temperature: 32-140°F / 0-60°C
Metallic Body: Nickel-plated Brass
O-Ring: NBR (Acrylonitrile butadiene rubber)
Plastic Body: PBT (Polybutylene terephthalate)
Packing: NBR (Acrylonitrile butadiene rubber)
Back Ring: POM (Polyoxymethylene plastic)
Lock Claws: Stainless Steel
Collar: Zinc Alloy
Sleeve: POM (Polyoxymethylene plastic)
8. Utah Pneumatic Push to Connect Fittings Nickel-Plated Brass Pc Male Straight 1/4"Od 1/4"Npt Thread Straight Connect Push Fit Fittings Tube Fittings Pneumatic Fittings 5 Pack (1/4od1/4Npt Brass pc)
Feature
- SPECIFICATION: Acceptable Fluid : air and water Pressure Range: Max Working Pressure: 2MPa | 290psi/ Working Temperature:-20°C—120°C | -4°F—248°F Applicable Tube: PU/NYLON/Soft PE hose.
- Installation : can be done within a short period of time. This tube connector is available in various styles and models Each model to serve its purpose All models are designed to suit your pneumatic piping needs perfectly
- Thinking of changing the tube direction after installation ? .Be relaxed . You can easily change the tubing connector direction even after installation. The release ring conforms with the ellipse design to ensure that the disconnecting unit is in good shape
- It’s important to note the taper threads on each fitting are properly coated with Teflon for optimal performance of the entire plumbing system.All fittings, however, contains internal hexagonal holes
- this enhances the installation process in a narrow space.
- These Push In Fittings Meet The Pressures And Temperatures Mentioned. Our Connect Push Brass Is More Resistant To High Temperatures We Are Ready To Serve You And Answer Any Questions Related To Our Connect It Fittings We Are Committed To Quality Of Our Air Fittings And If For Some Reason You Will Not Be Satisfied With Our Quick Connect Hose Fittings Money Back Guaranteed
9. Beduan BPL Push to Connect Air Fittings Male Elbow 6mm Tube OD x 1/8" NPT Thread (Pack of 10)
Feature
- Body Style: Male Elbow
- Size:6mm
- Fluid Type:Air Vacuum (no freezing)
- Working Pressure:0-1.0MPa | 0-150psi/Applicable Tube:PU / PA / PE / PVC
- Proof Pressure:3.0Mpa | 435psi.Seal O-ring:NBR
- Lock Claw:Stainless Steel(SUS)
- Body:Plastic(PET)
- Working Temperature:0-60°C | 32～140°F ；Negative Pressure:-100Kpa | -29.5 In Hg
Description
Beduan Pneumatic Fittings are a compact one piece push-to-connect fitting.
All items in the Beduan Pneumatic composite range are silicone free.
The Stainless steel gripping ring ensures excellent tube retention while the D seal
within the fitting provides a positive seal on the O.D. of the tube,
in both static and dynamic positions, due to an optimized design of the fitting cavity.
Beduan Pneumatic composite should not be used for live swivel applications
Body and collar are made of Nylon 6.6, gripping ring is stainless steel, and D seal and O-rings are Nitrile.
10. Utah Pneumatic Pack of 2 1/4" Od 1/4 Npt D.O.T Approved Brass Push to Connect Male Connector for Saej844 Nylon Air Brake Tube Applications
Description
DOT fittings
“push-in” or “push-to-connect” brass tube fittings provide a quick and efficient
method of assembling a variety of semi-rigid tubing, such as our nylon and polyethylene
(less expensive, traditional “compression” style fittings require multiple parts and are quite
time consuming to assemble). “Push-in” fittings are ideal for tight installations where a
wrench cannot be used. These “push-in” fittings also meet DOT standard FMVSS 571.106
and SAE J1131 Air Brake Performance Requirements, so they are approved for use with
nylon DOT air brake tubing (such as our NL560 Series SAE J844 Series). Their bodies and
“grippers” are made of brass and the o-ring is Buna-N (nitrile). Each male NPT end is pre-
coated in Loctite 516 so no other thread sealants are required. All fittings are suitable for
vacuum and pressures up to 150 psi. The temperature range is -40°C (-40°F) to 93°C
(+200°F). When installing, ensure tubing ends are cut squarely and free from burrs; to
remove, hold down the top of the insert against the fitting body then pull out the tubing.
Warning: These products are intended for use in motor vehicle or industrial compressed air
systems only.
Conclusion
By our suggestions above, we hope that you can found Brass Push To Connect Fittings for you.Please don’t forget to share your experience by comment in this post. Thank you!
