Top 10 Bosch 24V Miter Saw

The DEWALT DWS779 12″ Sliding compound Miter saw features a powerful 15 amp, 3, 800 RPM motor that delivers extended power and durability. It has a super efficient dust collection system that captures over 75% of dust generated. This miter saw also offers an exclusive back fence design which cuts up to 2×16 dimensional lumber at 90° and 2×12 at 45°.

The DW715 12 in. Single-bevel compound Miter saw is powered by a 15 amp motor to drive 4, 000 RPM, delivering Extended power and durability. Features stainless steel Miter detent plate and cam Miter Lock that provide repeatable accuracy and durability with easy adjustments. Tall sliding fences support 5-1/2 in. Of base molding vertically and 5-1/2 in. Of crown molding vertically nested. Lightweight design and built-in carry handle for portability.

The Bosch CM8S 8-inch single bevel sliding compound Miter saw features a Bosch exclusive design delivering a well-balanced saw with a top carry handle at the center of gravity and weighing only 37 lbs., These features easily provide one-handed portability on and off the job. Accessible controls make it easy to change bevel settings without reaching behind the saw. The integrated expanding work piece supports, large easy to read Miter and bevel scales and detent system provides quick and accurate cuts. Uniform marks from 52-degrees left to 60-degrees right with 10 adjustable Miter detents set at most common cuts. The CM8S also has the same crosscut capacity (12-3/4-inch) as a 10-inch Miter saw, at 30-Percent the weight.

DEWALT DCS361MB 20V Max Cordless Miter Saw Bare tool utilizes a 20V Max Battery Pack (DCB204) which provides on average, 183 cuts of 2×4 Pine – or 275 cuts of 3-1/4 Pine baseboard. It offers an integrated XPS cross cut positioning system that provides adjustment free cut line indication for better accuracy and visibility. The 7 1/4 Inch Sliding Miter Saw features a single left bevel which ranges from -3Degree to 48Degree left. With a 3 1/2 inch maximum vertical, 3 5/8 inch crown nested, and 2×8 inch horizontal cut capacity, this saw will handle most of the common cuts needed. The adjustable stainless steel miter detent plate has 10 positive stops to improve productivity and ensures cutting accuracy. An oversized bevel scale makes bevel angle adjustments accurate and easy. The compact, lightweight design (31.6 bs.) allows for easy transport and storage. It has a cam lock miter handle which delivers quick and accurate miter angles, along with a precise miter system and machined base fence support for optimized durability and cutting accuracy.

The DEWALT DCS361M1 20V Max Cordless Miter Saw utilizes a 20V Max Battery Pack (DCB204) which provides on average, 183 cuts of 2×4 Pine – or 275 cuts of 3-1/4 Pine baseboard. It offers an integrated XPS cross cut positioning system that provides adjustment free cut line indication for better accuracy and visibility. The 7 1/4 Inch Sliding Miter Saw features a single left bevel which ranges from -3Degree to 48Degree left. With a 3 1/2 inch maximum vertical, 3 5/8 inch crown nested, and 2×8 inch horizontal cut capacity, this saw will handle most of the common cuts needed. The adjustable stainless steel miter detent plate has 10 positive stops to improve productivity and ensures cutting accuracy. An oversized bevel scale makes bevel angle adjustments accurate and easy. The compact, lightweight design (31.6 bs.) allows for easy transport and storage. It has a cam lock miter handle which delivers quick and accurate miter angles, along with a precise miter system and machined base fence support for optimized durability and cutting accuracy. Includes: DCB204 20V Max Battery, DCB112 12 – 20V Max Charger, Carbide Blade, Users Guide, Blade Wrench, Material Clamp.

The DWS713 10 in. Compound Miter Saw has a 15 Amp motor to drive 5,000 RPM, delivering extended power and durability. Features stainless steel miter detent plate and cam miter lock that provide repeatable accuracy and durability with easy adjustments. Tall sliding fences support 4-1/2 in. of crown molding vertically nested. Lightweight design and built-in carry handle for portability. 2 in. x 6 in. dimensional lumber cross cut capacity at 90 degrees and 2 in. x 4 in. dimensional lumber at 45 degrees Includes: 15 Amp 10 in. Single Bevel Compound Miter Saw – DWS713,10 in. Carbide Tipped Blade,Wrench,Dust Bag,Vertical Clamp.

Makita is a pioneer in Brushless motor engineering, battery technology, and Miter saw innovation and has combined this expertise in the 18V X2 LXT® (36V) Lithium-Ion Brushless 10″ dual bevel sliding compound Miter saw (tool only, batteries and charger sold separately). it’s powered by two 18V Lithium-Ion batteries for 36V power and performance, but without leaving the 18V LXT® platform. Makita Brushless motors are engineered for up to 50% longer run time, increased power and speed, and longer tool life. The XSL06Z has an efficient BL™ Brushless motor that delivers up to 4, 400 RPM for fast and efficient cutting, with automatic speed Change™ technology to adjust cutting speed and torque under load for optimum performance. The XSL06Z has a unique 2-steel rail sliding system design that offers single slide-glide operation for smooth and Dead-On accurate cutting right out of the box, as well as a reduced overall footprint that allows the saw to be positioned flush against a wall. The innovative direct-drive gearbox and guard system is engineered for increased vertical cutting capacity (5-1/4”) and crown molding cutting capacity (6-5/8” nested), the largest in its class. It will also crosscut a 4×12 at 90 degrees. The saw miters 0° to 60° left and right, with positive stops at 0°, 15°, 22.5°, 31.6°, 45° and 60° (left or right). the bevel Lock is located in the front of the saw for easy access and Quick adjustments from 0° to 48° (left and right). the direct drive gearbox with soft start is a key point of difference. Direct drive enables smoother start-ups and consistent, Constant power with No belts to slip or replace. The Electric brake provides added convenience. Additional features include a high-quality 60T carbide-tipped blade, built-in laser that indicates the line-of-cut, and improved dust Collection capability for use with a bag (included) or vacuum (sold separately). it also has a large-sized aluminum base that improves the stability of cutting stock for more efficient cutting it’s part of Makita’s expanding 18V Lithium-Ion system, the world’s largest cordless tool system powered by 18V Lithium-Ion slide-style batteries. Makita 18V Lithium-Ion batteries have the fastest charge times in their categories, so they spend more time working and less time sitting on the charger. For improved tool performance and extended battery life, Makita created Star protection Computer controls™. Star protection is communication technology that allows the Star Protection-equipped tool and battery to exchange data in real time and monitor conditions during use to protect against overloading, over-discharging and overheating. For increased versatility, the tool can also be powered by Makita 18V LXT® and compact Lithium-Ion batteries with the Star symbol on the battery indicating Star protection inside.

The Makita 12” dual-bevel sliding compound Miter saw with laser (model LS1219L) combines capacity, accuracy and efficient dust extraction in a more compact size, with a unique 2-steel rail sliding system that offers a reduced footprint for operation flush against a wall. The innovative direct-drive gearbox and guard system is engineered for increased vertical cutting capacity of baseboard (6-3/4”) and crown molding (8” nested). it will also make 15” crosscuts at 90 degrees. The saw miters 0° to 60° left and right, with positive stops at 0°, 15°, 22.5°, 31.6°, 45° and 60° (left or right). the bevel Lock is located in the front of the saw for easy access and Quick adjustments from 0° to 48° (left and right). the saw is powered by a 15 amp direct drive motor with soft start, a key point of difference. Direct drive enables smoother start-ups and consistent, Constant power with No belts to slip or replace. The Electric brake provides added convenience. In addition, the electronic speed control maintains Constant speed under load for smoother, higher-quality cutting. Additional features include a high-quality 60T carbide-tipped blade, and a see-through blade guard system for greater visibility of the blade and line-of-cut. The built-in laser indicates the line-of-cut whether the blade is turning or not, and offers micro-adjustments for precise “left-of-blade” or “right-of-blade” cutting. It has dual dust Collection ports for improved dust Collection capability for use with a bag (included) or vacuum (sold separately). it also has a large-sized aluminum base that improves the stability of cutting stock for more efficient cutting.

The C8FSHES features Metabo HPT laser marker for cutting accuracy, an adjustable LED work light, and a best-in-class dust Collection system. Lightweight at only 32 lbs. , the C8FSHES 8-1/2″ Sliding compound Miter saw is ideal for trim carpenters, framers and woodworkers who demand precision, reliability, and mobility.