The Best Alfa Romeo Safety Ratings

Product Description

– Maximum Power Output 2 x 2000W – Bridgeable RMS Power @ 4 Ohms: 1x4000W – 2 Channel Bridgeable MOSFET Amplifier – Frequency Response 20 Hz-50kHz (±3dB) – Output Power @ 14.4v DC, 50Hz – 2 Ohm Stable – MOSFET Power Supply – PWM ( Pulse-Width-Modulation ) System – Glass Epoxy PCB – Silver RCA Inputs – Custom Terminal Block for Speaker Connection – Thermal / Overload / Short Circuit Protection – Input Impedance: 47K Ohms – Soft Turn On/ Off – Advanced Protection Circuitry – S/N Ratio: >90dB – Dimensions:10.24″W x 2.21″H x 16.14″L

From the Manufacturer

Advanced Protection Circuitry view larger

Power Series Amplifiers view larger

System Application Diagram view larger

The Strong and not so Silent Type

Custom Terminal Block for Speaker Connections view larger

Power Amplifiers

The Pyle Power Series Amplifiers will provide your audio setup with a powerful new sound. Add performance and quality enhancement to your music when you upgrade your audio system with these rugged and high-efficiency amps. Enjoy tomorrow’s advanced sound technology that outperforms all other amps in its class.

This lineup of Pyle Power amps raises the bar when it comes to true sound quality. Get that sound you’ve been looking for with crisp music reproduction for any mobile audio environment.

Sound Specialization

These high-efficiency amplifiers host impressive power output wattage and are where form and function meet. Enjoy sound and performance enhancing features like Ohm specific stability, Mosfet power supply, PWM (Pulse-Width-Modulation) System, Glass Epoxy PCB, silver RCA inputs, custom terminal blocks for speaker connections, strong frequency response, and input impedance rates along with plenty more features that make the Pyle Power Series Amplifiers stronger than the competition.

Intelligent Design

Safety features include power and protection LED indicator; soft turn-on/off, thermal, overload and speaker-short protection. LED Indicator shows when the amplifier is powered up normally and when your system is experiencing a protection fault.

Pump it Up

Take advantage of the Bass EQ Boost and turn it up. Make adjustments to the Bass EQ settings until you achieve that extra amount of kick you’ve been waiting for.

Strong Sound – Powerful Style

The jet-black design leaves a clean finish on the fortified aluminum heat-sink. The stream-lined and high-tech appearance will definitely add some muscle to your audio.

Total Audio Control

Once you’re connected, customize and adjust your listening experience to your liking with the amplifier’s control center. You can personalize and fine-tune settings like:

• Level (Gain) Control – These are basically volume controls. This will allow you to adjust the incoming signal to the amplifier so that it works well with your headunit or to match the level of other amplifiers in your system.
• Phase – Allows you to change the relative time that the waveform meets your ear. With standard subwoofer installations where the subwoofer is behind you, the phase should generally be at O. When subwoofers or woofers are in the kick panels or door panels, an adjustment is useful in delaying the timing of the wave meeting your ear.
• High-Pass Filter – The High Pass crossover is used for sending midrange and high frequency information to a particular speaker. Activate the High Pass crossover if you intend to drive satellite or coaxial speakers in the system along with subwoofers driven by the amplifier’s channels. Even if your system does not include subwoofers, it may be helpful to activate the High Pass with smaller speakers to protect them from low frequency information to achieve better sound.
• Low-Pass Filter – Filters high frequencies out of the music and improves efficiency and sound quality by allowing only the low frequencies to pass to the subwoofer. Sends only low frequency information to particular speakers. Low Pass crossover activation is usually desired if you intend to power subwoofers.
• Bass EQ – Variable from a range of decibel adjustments, this feature regulates the impact of your bass kick. You’ll have manual control over balancing and correcting the frequency range of a given sound.
• Crossover Switch – Basically acts as a filter and limits selected frequencies going to a subwoofer, which gradually reduce frequency signal strength. Routes output of the Low Pass or the output of the High Pass filters, or ‘Full’ to the power amplifier.

*Please refer to table below for amplifier specific information and adjustment options.

Speaker Output Connections

Connect right and left speaker wire to corresponding speaker output terminals. Be sure to correctly connect the selected speaker wires to their respected speaker terminal, this includes both positive and negative wiring. Improper installation/wiring will result in the speaker cones to move out of phase which can cause bass cancellation.

Input Connections

These amplifiers have inputs for Low Level input connections. The Low Level signal is carried through RCA connection cables.

Additional Features

• Maximum Power Output 2 x 2000W
• Bridgeable RMS Power @ 4 Ohms: 1x4000W
• 2 Channel Bridgeable MOSFET Amplifier
• Frequency Response 20 Hz-50kHz (±3dB)
• Output Power @ 14.4v DC, 50Hz
• 2 Ohm Stable
• MOSFET Power Supply
• PWM ( Pulse-Width-Modulation ) System
• Glass Epoxy PCB
• Silver RCA Inputs
• Custom Terminal Block for Speaker Connection
• Thermal / Overload / Short Circuit Protection
• Input Impedance: 47K Ohms
• Soft Turn On/ Off
• Advanced Protection Circuitry
• S/N Ratio: >90dB
• Dimensions: 10.24”W x 2.21”H x 16.14”L

Which Pyle Power Series Amplifier is Right For You?

	PLA2378	PLA2678 Currently Viewing	PLA2978	PLA4278	PLA4478	PLA1800	PLA3100D	PLA4600D
Channels	2	2	2	4	4	1	1	1
Watt Power Output @ 4 Ohms	2 x 1000	2 x 2000	2 x 2500	4 x 500	4 x 1000	1 x 300	1 x 900	1 x 1200
Watt Power Output @ 2 Ohms	–	–	–	–	–	1 x 500	1 x 1200	1 x 1800
Watt Power Output @ 1 Ohms	–	–	–	–	–	1 x 700	1 x 1600	1 x 2400
Bridged @ 4 Ohms	1 x 2000	1 x 4000	1 x 5000	2 x 1000	2 x 2000	–	–	–
Maximum Output Watt Power	2000	4000	5000	2000	4000	2400	3100	4600
Low Pass Cross Frequency	40Hz – 300Hz	40Hz – 300Hz	40Hz – 300Hz	60Hz – 200Hz	60Hz – 200Hz	40Hz – 300Hz	40Hz – 150Hz	40Hz – 150Hz
High Pass Cross Frequency	40Hz – 300Hz	40Hz – 300Hz	40Hz – 300Hz	15Hz – 250Hz	15Hz – 250Hz	–	–	–
Subsonic Filter	–	–	–	–	–	10Hz – 40 Hz	15Hz – 55Hz	15Hz – 55Hz
Fuse Size	2 x 15A	2 x 40A	4 x 30A	2 x 25A	2 x 40A	2 x 30A	4 x 25A	4 x 30A

HELLA is a global, family-owned company listed on the stock exchange that employs some 38,000 members of staff at over 125 locations in some 35 countries. The HELLA Group develops and manufactures lighting and electronic components and systems for the automotive industry, and also has one of the largest trade organizations for automotive parts, accessories, diagnosis and services within Europe. With almost 7,000 people working in research and development, HELLA is one of the most important innovation drivers on the market. HELLA has achieved sales of around 7 billion Euros in fiscal year 2017/2018. In addition, the HELLA Group is one of the top 40 automotive parts suppliers in the world and one of the 100 largest German industrial companies. Integrating security, reliability and precision workmanship HELLA is a tradition that continues for more than 100 years ago. HELLA is a reliable partner you can trust! Please read your vehicle manufacture’s manual when replacing a bulb and follow the instructions.

HELLA is a global, family-owned company listed on the stock exchange that employs some 38,000 members of staff at over 125 locations in some 35 countries. The HELLA Group develops and manufactures lighting and electronic components and systems for the automotive industry, and also has one of the largest trade organizations for automotive parts, accessories, diagnosis and services within Europe. With almost 7,000 people working in research and development, HELLA is one of the most important innovation drivers on the market. HELLA has achieved sales of around 7 billion Euros in fiscal year 2017/2018. In addition, the HELLA Group is one of the top 40 automotive parts suppliers in the world and one of the 100 largest German industrial companies. Integrating security, reliability and precision workmanship HELLA is a tradition that continues for more than 100 years ago. HELLA is a reliable partner you can trust! Please read your vehicle manufacture’s manual when replacing a bulb and follow the instructions.

The Jensen Power 250×2 Dual Channel Car Amplifier with 500 Watt Peak Performance is a force to be reckoned with. Your dual channel car amplifier allows you to connect up to two speakers or subwoofers giving you optimal sound performance when you need it the most. We anticipated continuous use of your amplifier so we engineered a High Current & Efficient MOSFET design that enables you to have insurmountable power. Your dual channel speaker/subwoofer amplifier delivers up to 500 Watts of Peak Power, 250 Watt RMS via 1 Channel Bridged at 4 Ohm Impedance, 85 Watt RMS via 2 Channel at 4 Ohm Impedance and 125 Watt RMS via 2 Channel at 2 Ohm Impedance.

Your dual channel car amplifier is as versatile as your needs, so we added a pass through RCA connection giving you the option of bridging various amplifiers for unmatched sound superiority and ingenuity. We cannot stress safety enough here at Jensen so we designed a built in short circuit protection via a thermal and DC offset safety protection for your amplifier. The journey will never be the same without Jensen.

Backed by our 1 Year warranty that guarantees a hassle free experience with excellent customer service.

1. This product is for monitoring tire pressure: if the pressure of tire is 10% less than required, the tire pressure indicator will show red, otherwise it will show normal which is green. Each monitor is calibrated to the specified PSI, if your tire is under inflated, it will not show green. For example, if your recommended tire pressure is 40psi, then you should purchase our PSI 40 monitor caps. If your current tire pressure is under-inflated, when you install our monitor cap onto your tire, the cap will not show full green. (It doesn’t check your tire over inflated) 2. Chrome Plated Brass 3. Patented, designed, assembled and tested in the USA. 4. The monitors are available in chrome (plated brass valve body) to complement any wheel and fits passenger vehicles, SUV’s, trucks, trailers, motorcycles, ATV’s, RV’s, commercial vehicles, and bicycles. 5. After installation, please drive 10 miles or more to activate the monitors. 6. Motorcycles and bicycles: Please check for proper clearance between monitor and brake system.

Voltage rating: 32 volts DC (or less). UL Rated 94VO thermoplastic housing material. Zinc alloy composite terminal material with silver plating. 1,000 amperes interrupt rating. Amperage marking is OCR compliant. UL recognized (3-30A) Guide JFHR2, File E56412.