We spent many hours on research to finding alfa romeo gt 1.9, reading product features, product specifications for this guide. For those of you who wish to the best alfa romeo gt 1.9, you should not miss this article. alfa romeo gt 1.9 coming in a variety of types but also different price range. The following is the top 10 alfa romeo gt 1.9 by our suggestions
957 reviews analysed
1. PowerBox CRD2 Diesel Performance Module for Alfa Romeo GT 1.9 JTD 110 KW / 150 PS / 320 NM
Description
Product Overview
Signal Variation Switch
The digital PowerBox CRplus has an Signal Variation Switch with 16 effective settings. The unit can be easily adjusted by using a small screw driver.
When making inquiries or purchases please ALWAYS provide the following information…
2. PowerBox CRD2 Diesel Performance Module for Alfa Romeo GT 1.9 JTD 110 KW / 150 PS / 305 NM
Description
Product Overview
Signal Variation Switch
The digital PowerBox CRplus has an Signal Variation Switch with 16 effective settings. The unit can be easily adjusted by using a small screw driver.
When making inquiries or purchases please ALWAYS provide the following information…
3. Plug & Drive Diesel Tuningchip CRD2 PowerBox for Alfa Romeo GT 1.9 JTD 110 KW / 150 PS / 320 NM
Description
Product Overview
Signal Variation Switch
The digital PowerBox CRplus has an Signal Variation Switch with 16 effective settings. The unit can be easily adjusted by using a small screw driver.
When making inquiries or purchases please ALWAYS provide the following information…
4. Plug & Drive Diesel Tuningchip CRD2 PowerBox for Alfa Romeo GT 1.9 JTD 110 KW / 150 PS / 305 NM
Description
Product Overview
Signal Variation Switch
The digital PowerBox CRplus has an Signal Variation Switch with 16 effective settings. The unit can be easily adjusted by using a small screw driver.
When making inquiries or purchases please ALWAYS provide the following information…
5. Power Box CRD Performance Diesel Tuningchip for Alfa Romeo GT 1.9 JTD 110 KW / 150 PS / 320 NM
Description
The PowerBox CRD works by modifying the electronic signals that control fuel pressure produced by the pump in order to optimize engine performance. The PowerBox CRD senses and responds to changes in engine load/speed throughout the range of acceleration. With the PowerBox CRD, pressure accumulates faster in the rail and is readily maintained to deliver more power and torque. The result is smooth and responsive acceleration that produce sportier handling. The increased torque produced by the PowerBox enables the engine to operate more efficiently, so fuel consumption is minimized. The PowerBox CRD has been programmed for optimal performance. Despite its potential for power improvement, the PowerBox CRD has been programmed to provide better fuel efficiency.
Product Overview
– For all vehicles with Common Rail Technology
– Greater performance than our standard PowerBox CR
– Improved fuel efficiency
– Includes OEM plugs (no soldering required)
– No increased emissions
– No interference to the Electronic Control Unit (ECU); original settings are not altered
– Will not harm your engine, does not increase injection pressure
– Will not alter engine diagnostics functioning
– Will not interfere with engine error code sensing
– Does not change the service intervals required for your vehicle
– 3-year limited warranty
Signal Variation Switch
The digital PowerBox CRD has a signal variation switch with 16 positions. Using a small screw driver, higher output can be achieved by turning the HEX switch to a higher setting.
6. Lower Intercooler Turbo Silicone Hose Pipe Fit Alfa Romeo GT 147 156 1.9 JTD 16v 8v
Feature
- Made from high quality woven thermoplastic and pure silicone materials to form the highest quality engine hoses and offer longer life expectancy
- Handmade and carefully inspected
- High performance and reliability in high pressures conditions
- Flexible and can handle extreme temperature from -60°C to +260°C or -76°F to + 530°F
- Resistant to UV, water, ozone and oxygen
Description
Thickness: 2mm to 5mm, 3-4-ply Working Temperature: -76°F (-60°C ) to +500°F (+260°C) Working Pressure: 0.3 to 0.9MPa Bursting Pressure: 2MPa Size Tolerance: +/-0.5mm
7. Alfa Romeo 1.9 JTD 939A200 147 156 159 GT Pierburg Swirl Flap Blank Removal Kit X8R0077
Feature
- PRODUCT DESCRIPTION: Our high quality blanking plugs in this listing allow the swirl flaps to be removed and blanked off on the Pierburg intake manifold. Resolving air leaks / vehicles faults and preventing any future swirl flap issues. A cost effective alternative to replacing the complete manifold which with the same flawed design swirl flap mechanism would likely fail again.
- SYMPTOMS OF FAULT: Engine management light (EML) lit, high fuel consumption, rough idling, rough running, poor power and torque, smoking from exhaust, error P2279-11 Intake system air leak,P2075 fault code.
- THE SOLUTION: REMOVE THE SWIRL FLAPS FROM THE INLET MANIFOLD AND BLANK OFF USING OUR KIT
- ELIMINATE SWIRL FLAP FAULTS WITHOUT HAVING TO BUY A COMPLETE NEW INTAKE MANIFOLD. Our unique design kit allows you to blank off the swirl flaps on your original intake manifold resolving swirl flap faults permanently. Our blanks are precision engineered from billet aluminium and are fitted with a Viton O ring to ensure a good seal, a far better alternative to pressed parts which can fail to seal.
- A cost effective alternative to a whole new manifold which would likely fail again. Save the cost of a new manifold and prevent any further swirl flap issues. Some of our customers have installed our blanks as a preventative measure to avoid swirl flap issues further down the line and some customers have experienced performance gains from removing the swirl flaps. PART NUMBERS LISTED BELOW: 55210202, 55210201, 2.03462.03, 2.03462.02
- INSTRUCTIONS: 1. https://youtu.be/eM7Yl3FxmPg 2. http://www.x8r-instructions.co.uk/Pierburg-Intake-Inlet-Manifold-Swirl-Flap-Blank-Blanks-install-instruction-guide-vauxhall-saab-opel-fiat-alfa-romeo-1.9-cdti.pdf
Description
THE PROBLEM: THE BALL JOINTS ON THE SWIRL FLAPS CAN WEAR TO EXCESS RENDERING THE SWIRL FLAPS UN-FUNCTIONAL ALSO THE SEAL ON THE SWIRL FLAPS CAN FAIL CAUSING INLET MANIFOLD AIR LEAKS. It is a very common fault for the swirl flap operating rod bushes to wear down and for the operating rod to pop off causing these symptoms, this can easily be rectified with our replacement improved design operating rod which can be purchased in our eBay store. Unfortunately on occasions the ball joints on the swirl flaps which this rod connects to can be too worn to repair with a new rod, alternatively the seals on the swirl flaps on occasions fail and cause air leaks. Previously this necessitated the replacement of the whole intake manifold at vast expense. However using our blanking kit the swirl flaps can be removed and blanked off allowing you to repair the manifold you have; saving the cost of a new manifold and preventing any future swirl flap issues. ***** INSTRUCTIONS: 1. https://youtu.be/eM7Yl3FxmPg 2. http://www.x8r-instructions.co.uk/Pierburg-Intake-Inlet-Manifold-Swirl-Flap-Blank-Blanks-install-instruction-guide-vauxhall-saab-opel-fiat-alfa-romeo-1.9-cdti.pdf ****** VEHICLES AFFECTED: YOU WILL NEED TO CHECK THE PART NUMBER ON YOUR INTAKE MANIFOLD BEFORE ORDERING AS THERE ARE TWO TYPES OF MANIFOLD. THIS LISTING IS FOR MANIFOLDS WITH THE PART NUMBERS LISTED BELOW: 55210202, 55210201, 2.03462.03, 2.03462.02 ****** YOU WILL RECEIVE: Our repair kit includes: 4X Large cnc machined billet aluminium blanks (fitted with high quality Viton O-ring) 1X Small cnc machined billet aluminium blank (fitted with high quality Viton O-ring) 1X Adhesive to secure the blanks
8. Alfa Romeo 1.9 JTD Multijet 147 156 159 GT Intake Manifold Swirl Flap Blanks X8R0076
Feature
- PRODUCT DESCRIPTION: Our high quality blanking plugs in this listing allow the swirl flaps to be removed and blanked off on the Pierburg intake manifold. Resolving air leaks / vehicles faults and preventing any future swirl flap issues. A cost effective alternative to replacing the complete manifold which with the same flawed design swirl flap mechanism would likely fail again.
- SYMPTOMS OF FAULT: Engine management light (EML) lit, high fuel consumption, rough idling, rough running, poor power and torque, smoking from exhaust, error P2279-11 Intake system air leak,P2075 fault code.
- YOU WILL NEED TO CHECK THE PART NUMBER ON YOUR INTAKE MANIFOLD BEFORE ORDERING AS THERE ARE TWO TYPES OF MANIFOLD. THIS LISTING IS FOR MANIFOLDS WITH THE PART NUMBERS LISTED BELOW: 55206459, 55190238, 55194739, 55206460, 2.03462.01, 2.03462.00W. WE OFFER A BLANKING KIT FOR THE OTHER TYPE OF MANIFOLD IN OUR SHOP.
- THE BALL JOINTS ON THE SWIRL FLAPS CAN WEAR TO EXCESS RENDERING THE SWIRL FLAPS UN-FUNCTIONAL ALSO THE SEAL ON THE SWIRL FLAPS CAN FAIL CAUSING INLET MANIFOLD AIR LEAKS. It is a very common fault for the swirl flap operating rod bushes to wear down and for the operating rod to pop off causing these symptoms, this can easily be rectified with our replacement improved design operating rod which can be purchased in our eBay store.
- INSTRUCTION: 1) https://youtu.be/eM7Yl3FxmPg 2) http://www.x8r-instructions.co.uk/Pierburg-Intake-Inlet-Manifold-Swirl-Flap-Blank-Blanks-install-instruction-guide-vauxhall-saab-opel-fiat-alfa-romeo-1.9-cdti.pdf
Description
THE PROBLEM: ***** THE BALL JOINTS ON THE SWIRL FLAPS CAN WEAR TO EXCESS RENDERING THE SWIRL FLAPS UN-FUNCTIONAL ALSO THE SEAL ON THE SWIRL FLAPS CAN FAIL CAUSING INLET MANIFOLD AIR LEAKS. It is a very common fault for the swirl flap operating rod bushes to wear down and for the operating rod to pop off causing these symptoms, this can easily be rectified with our replacement improved design operating rod which can be purchased in our eBay store. Unfortunately on occasions the ball joints on the swirl flaps which this rod connects to can be too worn to repair with a new rod, alternatively the seals on the swirl flaps on occasions fail and cause air leaks. Previously this necessitated the replacement of the whole intake manifold at vast expense. However using our blanking kit the swirl flaps can be removed and blanked off allowing you to repair the manifold you have; saving the cost of a new manifold and preventing any future swirl flap issues. ***** THE SOLUTION: REMOVE THE SWIRL FLAPS FROM THE INLET MANIFOLD AND BLANK OFF USING OUR KIT; ELIMINATE SWIRL FLAP FAULTS WITHOUT HAVING TO BUY A COMPLETE NEW INTAKE MANIFOLD. Our unique design kit allows you to blank off the swirl flaps on your original intake manifold resolving swirl flap faults permanently. Our blanks are precision engineered from billet aluminium and are fitted with a Viton O ring to ensure a good seal, a far better alternative to pressed parts which can fail to seal. A cost effective alternative to a whole new manifold which would likely fail again. Save the cost of a new manifold and prevent any further swirl flap issues. Some of our customers have installed our blanks as a preventative measure to avoid swirl flap issues further down the line and some customers have experienced performance gains from removing the swirl flaps.
9. NB-AERO Full Car Covers Dustproof One Layer Indoor Car Cover for 2003 Alfa Romeo GT 1.9 Multijet 16v 2 Door Fixed-Head Coupe
10. Fuel Rail Pressure Sensor OEM 2S7G9F972AD for ALFA ROMEO 156 159 SPIDER 1.9 2.0
Description
Fitment:
FOR ALFA ROMEO 156 (932) 2.0 JTS (932AXA) 03.2002-09.2005 122 166 1970
FOR ALFA ROMEO 159 (939) 1.9 JTS 09.2005-11.2011 118 160 1859
FOR ALFA ROMEO 159 (939) 2.2 JTS 09.2005-11.2011 136 185 2198
FOR ALFA ROMEO 159 Sportwagon (939) 1.9 JTS 03.2006-11.2011 118 160 1859
FOR ALFA ROMEO 159 Sportwagon (939) 2.2 JTS 03.2006-11.2011 136 185 2198
FOR ALFA ROMEO GT (937) 2.0 JTS 11.2003-09.2010 121 165 1970
FOR ALFA ROMEO GT (937) 2.0 JTS 12.2006-09.2010 119 162 1970
FOR ALFA ROMEO GTV (916C_) 2.0 JTS 04.2003-10.2005 121 165 1970
FOR ALFA ROMEO SPIDER (916S_) 2.0 JTS 04.2003-04.2005 121 165 1970
Conclusion
By our suggestions above, we hope that you can found Alfa Romeo Gt 19 for you.Please don’t forget to share your experience by comment in this post. Thank you!
