Nowadays, there are so many products of alfa romeo carbon fiber hood in the market and you are wondering to choose a best one.You have searched for alfa romeo carbon fiber hood in many merchants, compared about products prices & reviews before deciding to buy them.
You are in RIGHT PLACE.
Here are some of best sellings alfa romeo carbon fiber hood which we would like to recommend with high customer review ratings to guide you on quality & popularity of each items.
592 reviews analysed
1. Bigetaige Universal Front Bumper Spoiler, 8.2ft/250cm Universal Carbon Fiber Front Bumper Lip Strip Splitter Spoiler
Feature
- ???? Quality automotive tape will not be affected by wet or cold weather and will easily endures all all types of weather, car washes and high speeds.
- ???? Carbon lip is a Easy to bend and conform to the shape of the bumper,Easy installation and good adhesion.
- ???? Front lip Universal for most cars, trucks, SUV with easy to use 2.5M automotive tape.
- ???? Guard protection bumper spoiler rubber skirt, anti-scratch and decorative.while protecting your vehicle from curbs and scrapes.
- ???? Size: 6.6 x 4 x 2 inches
Description
Specifications:
– Size: 98-3/8″L x 2-9/16″W(250×6.5cm)
– Weight: 1.87Lbs
Installation method:
1. Convenient installation – the length can be adjusted to the best position of your car.
2. Clean the bottom of the bumper, preferably using alcohol to install the lip, which will ensure a firm combination with the bumper case.
3. Then peel off the double-sided tape and attach it to the front bumper lip. The degree of adhesion (adhesion or screw) can be selected. In order to achieve better adhesion effect, we recommend using screw and screws included in the package.
4. Install at the bottom of the bumper, starting from the end of the bumper.
5. Quick and easy way to add a front bumper lips, is almost any car aggression and reduce the appearance of flexible and durable materials, rubber carbon fiber design allows you to install the lower bumper.( The front lip of the car must be equipped with a self tapping screw, it is installed. Since the vibration wave of the automobile engine is relatively large, the screw will make (bumper separator/spoiler plate) stronger and will not fall off. Cut off the excess with scissors (note: don’t clean your car within 48 hours, glue should be fixed after 12 hours)
NOTE: ★If you need a stronger, more permanent attachment, you amy use self-taping screws to secure the lip to the bumper.
Package Contents:
Front Bumper Lip*1
Screws*5
2. Aramox Car Front Bumper Lip Splitter Diffuser,4pcs Carbon Fiber Car Front Bumper Canard Lip Splitter Fins Body Spoiler Universal
Feature
- Widely used: The bumper lip splitter is universal for most of car models, have a certain protective effect.
- Carbon fiber material: The front bumper canards is made of premium quality carbon fiber material, good toughness, not easy to deform. Exquisite workmanship, a great decoration to upgrade the look of your car, increases your racing style.
- Scratch prevention: The bumper splitter fins can absorb impacts and prevents scratches, effectively protects the bumper from small bump damages or scratch when stopping or parking.
- Easy to install: Comes with 4pcs bumper splitters, only use on front bumper. Back with double side adhesive tape, simple and easy installation.
- 100% Guarantee: Our warranty period is 12 months. If you encounter any problems during your use, you can contact our customer service, They will provide you with solution in time.
Description
Specification:
Condition: 100% Brand New
Material: Carbon Fiber
Color: Black
Quantity: 4pcs
Fitment: Universal
Package list:
4 * Front Bumper Lip Splitter
3. X AUTOHAUX 2.5m 8.2ft Car Rubber Bumper Lip Splitter Body Side Skirt Protector Carbon Fiber Pattern Red
Feature
- Universal fit for most cars, trucks and SUVs.
- Guard protection bumper spoiler rubber skirt, anti-scratch and decorative.
- High quality rubber material, smooth and delicate cross-section and protect cars from collision and alleviate the damage
- Get an aggressive and unique look—- make your car looks more luxury.
- Easy to bend, cut and fold, flexible enough to meet your need.
Description
Feature:
Flexible and lightweight.
Gives your car a more aggressive and customized look
Easy to install, just need a scissor.
High performance racing style, stick it on front or rear bumper, body kit, side skirt, tail fins etc.
Flexible enough to conform to different types of bumper/car body
Protect your car from scratches/bump and any undesired damage caused by collision.
Specification:
Material: Rubber
Size: 250×5.5cm / 98.43″x2.17″(L*W)
Color: Red
Fitment: fits for most cars, trucks and SUVs
Installation Tips:
Please clean the underside of the bumper with rubbing alcohol on the location where the lip will be attached. This will ensure a strong bond with the bumper
Please peel the backing off of one end of the lip. Position the tape so that the lip is protruding towards you. Install on the underside of the bumper starting at one end of the bumper. Make sure to press firmly. Below 0 degree Celsius, warm product before sticking it.
Please continue to peel and attached to the rest of the bumper making sure the lip is even as you do
Please cut off the excess with scissors.
NOTE:
If you need a stronger, more permanent attachment, you may use self-taping screws to secure the lip to the bumper.
Package Include:
1 x Car Lip Skirt Protector
5 x Self-tapping Screws
4. Front Lip ,HengJia Auto Parts 2.5m/8.2ft Car carbon fiber front lip,Front Bumper Lip ,Carbon Lip ,Side Skirt, front lip spoiler 100% waterproof protection(Carbon black)
Feature
- ????Carbon lip function:To provide an elegant and personalized appearance,Front bumper guard anti-collision protective,protect from scrapes from driveways,speed bumps and curbs.protect cars from collision and alleviate the damage.
- ????Made of durable and sturdy rubber.smooth and delicate cross-section,prevent scratches.flexible in use,Easy to bend,Have Excellent wear resistance.Bumper Lip completely fit with your bumper design.
- ????COMPATIBILITY: Rubber Door Bumper Protective strip can be Free deformation and Free clipping.requires no special skills or tools,Length is adjustable to your car, Equipped with screws to achieve better adhesion and fixation.
- ????Specification:long 250cm*wide 5.5cm/98.4 inch*2.16inch.Quality 3M automotive tape will not be affected by wet or cold weather.D.I.Y Car Front Lip fearturing in curved design, slim, Can be stick on front or rear bumper, body kit, side skirt,universal for most cars.
- ????carbon fiber front lip energy Give your car an aggressive , It prevents nasty collision scratches and provides protection Get an aggressive and lowered look—- make your car looks more sporty!（case of damage or other reasons,please E-mail contact us, we will respond within 12 hours can do for you and arrange. Thank you very much for your order!）
Description
Name:Bumper Lip
Size:250cm*wide 5.5cm/98.4 inch*2.16inch
Features: Universal for most cars/ trucks/ SUVS
Function: Guard Protection Rubber Skirt, anti-scratch and decorative
Scope of use:Stick it on front or rear bumper, body kit, side skirt, tail fins etc This product is made from high quality PVC Imported Carbon Fiber material, smooth cross section, flexibility:
Ultra light weight:
With adhesive, Perfect fit and easy to install
* Sturdy rubber material, soft and strong
You can also apply a liquid to shine it up and make it look beautiful colour!
Installation Guides:
1. Please keep the surface clean and dry, no sand/dust and put some adhesion promoter (Without) at it before installation.
2. Install the item from the middle, remove protective film from adhesive carefully.
3. radian Please cut a few triangles in adhesive tape, which is convenient for the turning.
4. Determine exact location of product, align carefully and then press firmly to insure proper adhesion.
5. more permanent attachment,you may use self-taping screws to secure the lip to the bumper.
6.Do not touch water after pasting within 72 hours
Package Includes:
1 * Roll Rubber Skirt 1 * Adhesion Promoter 1* carbon lip 1* installation manual 1*SAMURAI sticker 8* screw
5. X AUTOHAUX 2.5m 8.2ft Car Rubber Bumper Lip Splitter Body Side Skirt Protector Carbon Fiber Pattern Universal
Feature
- Universal fit for most cars, trucks and SUVs.
- Guard protection bumper spoiler rubber skirt, anti-scratch and decorative.
- High quality rubber material, smooth and delicate cross-section and protect cars from collision and alleviate the damage
- Get an aggressive and unique look—- make your car looks more luxury.
- Easy to bend, cut and fold, flexible enough to meet your need.
Description
Feature:
Flexible and lightweight.
Gives your car a more aggressive and customized look
Easy to install, just need a scissor.
High performance racing style, stick it on front or rear bumper, body kit, side skirt, tail fins etc.
Flexible enough to conform to different types of bumper/car body
Protect your car from scratches/bump and any undesired damage caused by collision.
Specification:
Material: Rubber
Size: 250×5.5cm / 98.43″x2.17″(L*W)
Color: Red
Fitment: fits for most cars, trucks and SUVs
Installation Tips:
Please clean the underside of the bumper with rubbing alcohol on the location where the lip will be attached. This will ensure a strong bond with the bumper
Please peel the backing off of one end of the lip. Position the tape so that the lip is protruding towards you. Install on the underside of the bumper starting at one end of the bumper. Make sure to press firmly. Below 0 degree Celsius, warm product before sticking it.
Please continue to peel and attached to the rest of the bumper making sure the lip is even as you do
Please cut off the excess with scissors.
NOTE:
If you need a stronger, more permanent attachment, you may use self-taping screws to secure the lip to the bumper.
Package Include:
1 x Car Lip Skirt Protector
5 x Self-tapping Screws
6. Mega Racer Universal JDM Style Decorative Hood Scoop Smoke Black Air Flow Intake Vent Cover Auto Car Truck Sport Racing
Description
JDM Style Universal Factory Stock Oem Replacement Smoke Black Plastic Hood Scoop. Easy 3M Tape-On Installation. Top Quality Durable ABS Plastic. Free Standard US Shipping and Full Warranty Always.
7. Yescom 8.2ft/250cm Universal Carbon Fiber Front Bumper Lip Strip Splitter Spoiler Side Skirt for Car Truck
Description
Features:
– Length of 8.2ft(98.4″), is made of durable and solid rubber to prevent scratch
– Equipped with screws to achieve better adhesion and fixation
– Can be stick on front or rear bumper, body kit, side skirt
– Carbon fiber design can decorate your vehicle
– It’s lightweight, bendable and adjustable, easy to install
– Universal fitment for most cars and trucks
Specifications:
– Size: 98-3/8″L x 2-9/16″W(250×6.5cm)
– Weight: 1.87Lbs
Package Contents:
– 1x Front Bumper Lip
– 10x Screws
– 1x Manual
8. QIKE Universal Front Bumper Spoiler Carbon Fiber Style Bumper Lip Splitter Chin Spoiler Body Kit Trim (3M,Black)
Feature
- 100% brand new with high quality, made with high quality EPDM rubber foam, 98 inches front bumper rubber spoiler
- Flexible and lightweight foam rubber install in minutes using ultra strong 3M automotive tale. Instruction of installation is included.Professional installation is highly recommended
- Protect your car from scratches/bump and any undesired damage caused by a collision
- Universal fits for most cars,trucks,SUVs . Stick it on front or rear bumper, body kit, side skirt, tail fins ,etc. Notice: It is carbon fiber LOOK
9. Cuztom Tuning Fits for 2017-2019 BMW G30 530i 540i F90 M5 Highkick Duckbill CF Carbon Fiber Trunk Lid Spoiler Wing- M4 Style
Feature
- Fitment: Fits 2017-2019 BMW G30 5 Series 4 Door Sedan and F90 M5 Model
- Package Includes: 1 X Real Carbon Fiber Trunk Spoiler Lid As Shown In the Picture
- Made of Light Weight & Top-Grade Durable Carbon Fiber Material
- Will Dramatically Improve The Sporty Appearance For Your BMW
- Instruction Not Included, Professional Installation Is Highly Recommended.
Description
100% Brand New.
Performance Sport Style Spoiler At Low Price.
Excellent Fitment and Quality.
Made of Light Weight & Top-Grade Durable Carbon Fiber Material
100% Real 3K Vacuumed & Dry Carbon Fiber
UV-Resistant Clear Coating to Prevent Color Fade
Will Dramatically Improve The Sporty Appearance For Your BMW
*Instruction Not Included, Professional Installation Is Highly Recommended.*
10. Mega Racer Universal 100% Carbon Fiber Front Hood Latch Pin Key Locking Kit Black Racing Sport Mount Bonnet Nismo Auto Sedan Coupe
Feature
- Brand New. 100% Real Carbon Fiber. Top Quality Grade A-3K Twill Carbon Fiber Overlay.
- Size: 2.5 inch Diameter
- Mounting Bolts, Nuts, and Lock-able Keys are Included.
- Enhances Custom Racing Look and Upgrade Style Appearance with Carbon Fiber Design.
- Professional Mechanics Installation is Highly Recommended (Drilling is Required)
Description
JDM Style Universal Hood Pins Latch Key Locking. Top Quality Grade A-3K Twill Carbon Fiber Overlay. Professional Mechanics Installation is Highly Recommended (Drilling is Required). Enhances Custom Racing Look and Upgrade Style Appearance with Carbon Fiber Design. Free Standard US Shipping and 60 Days Full Warranty Always.
Conclusion
By our suggestions above, we hope that you can found Alfa Romeo Carbon Fiber Hood for you.Please don’t forget to share your experience by comment in this post. Thank you!
