Finding your suitable readers for gas line for dryer installation is not easy. You may need consider between hundred or thousand products from many store. In this article, we make a short list of the best readers for gas line for dryer installation including detail information and customer reviews. Let’s find out which is your favorite one.
697 reviews analysed
1. Dormont 20-3132-36B 36 in. Long Outlet Diameter Male x 1/2 in. Female Gas Appliance Connector, 1 pack
2. 72" Flexible Stainless Steel Gas Appliance Line with 1/2" OD 1/2 MIP x 1/2 FIP
Feature
- This is for gas dryers and not for ovens or ranges
- 72″ Flexible Stainless Steel Gas Appliance Line
- 203-3132-72 – 6 Feet Long
- This item is not universal. Make sure you are in need of 1/2 gas piping otherwise this will not fit.
- Inner dimensions of this line are 3/8″. Make to measure before ordering or will not fit.
Description
72″ Flexible Stainless Steel Gas Appliance Line With 1/2″ OD 1/2 MIP x 1/2 FIP. Stainless steel connector 1/2″ OD (3/8″ ID) 1/2 MIP x 1/2 FIP – Yellow Coated.
3. Dormont 0240892 Gas ApplianceConnectorKit 48 In. Long 5/8 In. Outlet Diameter Yellow Coated
Feature
- COMPLETE GAS RANGE INSTALL KIT: “Safety Shield” coated gas range or furnace installation kit
- LEAK TESTED GAS KIT: 5/8-Inch OD x 48-Inch length coated stainless steel gas connector
- GAS INSTALLATION KIT INCLUDES: two 1/2-Inch MIP (tapped 3/8-Inch FIP) brass adapters and one 3/4-Inch MIP (tapped 1/2-Inch FIP) adapter
- BEST GAS DRYER CONNECTOR KIT: Made in the USA. Everything you need to hook up your gas dryer
- Kit also includes one pipe thread sealant one leak test kit and one detailed installation guide
Description
Product Description
Dormont 0240892 Gas Appliance Connector Kit 48 In. Long 5/8 In. Outlet Diameter
From the Manufacturer
This Dormont gas connector is CSA Design Certified domestically and internationally for indoor and outdoor use with natural, manufactured, mixed, liquefied petroleum, and LP-gas air mixtures Durable, naturally corrosion-resistant 304 stainless steel construction offers an exclusive no-neck design to increase flexibility Quality flared end fittings create a metal to metal seal to ensure integrity in critical applications Manufactured domestically in the USA, all Dormont gas connectors are 100 percent leak tested to ensure consistent quality you can trust Safety Shield coating provides extra corrosion protection from accidental contact with common household chemicals
4. Supplying Demand 203-3132 Dryer Gas Hose With Fittings Compatible With 1/2" MIP x 1/2" FIP Hose Connections (6 Feet)
Feature
- Hose Fittings Are Compatible With 1/2″ MIP and 1/2″ FIP
- Comes in Supplying Demand packaging with help support
- The fittings are half inch. The hose is not. Therefore if needing a larger hose diameter then please contact support.
- This item is not universal. This item is mainly used for dryers. If you are not sure what you need contact us before ordering to avoid delays in your repair.
5. Mr. Heater One-Stop Universal Gas-Appliance Hook-Up Kit
Feature
- Nullify
- Imported
- 5-piece universal gas-appliance hook-up kit
- Comes with everything needed for installing most gas appliances
- Includes 18-inch flexible gas line, 3 different couplings and on/off valve
- On/off valve provides easy servicing of appliances or summer shutdown
- Solid brass fittings. One Stop Universal Gas Appliance Hook Up Kit has everything needed for installation and can be used with gas logs, unvented wall mount heaters, gas stoves, and garage heaters
Description
Perfect for gas logs, garage heaters, gas stoves and wall mounted heaters. Size: 3/8 inch, Compatible With: Heaters, logs, ranges, dryers, etc., Product Type: Connection kits, Fuel Type: Propane/natural gas
6. LASCO 10-1259 Flexible Coated Stainless Steel Gas Range Supply Line, 72-Inch, 5/8 Inch ID with 3/4 Inch Pipe Thread Fittings
Feature
- Perect for indoor or outdoor projects
- Premium quality gas hose and fantastic value!
- Yellow safety coated connector
- Bright colored line is easy to use
- Corrugated stainless steel
- Made with durable material to withstand time
- Works as both Natural Gas hose or Propane line
- Great for different types of gas powered projects
- Most commonly used as Gas Range Connector
7. Dormont 0222529 SmartSense Gas Dryer & Water Heater Appliance Connector Kit, 36 In. Long, 1/2 In. Outside Diameter, Yellow Coated
Description
This kit contains 36 IN yellow coated corrosion resistant SS gas connector with 1/2 IN FIPx1/2 IN MIP-tapped 3/8 IN FIPx1/2 IN MIP SmartSense EFV & TS adapters, thread sealant, leak solution. This CSA approved gas connector is commonly used on home appliances like gas dryers. SmartSense used with Dormont coated gas connectors gives an industry leading 3 Levels of Protection. This 1/2 IN OD flarex1/2 IN MIP SmartSense excess flow valve and thermal shut off is an intricately-designed valve with two primary components, a gas flow-limiting plunger and thermal shutoff sensing ring. SmartSense detects and activates in the event of gas line rupture, disconnection, or fire. The plunger limits gas flow protecting against excessive gas leaks in the event of full-line rupture or disconnect. SmartSense self resets to the standard rate of flow after gas line restoration and pressure equalization. The internal thermal ring expands to stop gas flow for temperatures ranging from 350 to 425 degrees F.
8. Whirlpool 20-48KITRC Gas Dryer Connector Kit
Description
Product Description
This is a genuine replacement part.
From the Manufacturer
Everything you need to hook up your gas dryer. Kit includes gas connector line, 3 fittings and sealant. In the State of Massachusetts, the following installation instructions apply: Installations and repairs must be performed by a qualified or licensed contractor, plumber, or gasfitter qualified or licensed by the State of Massachusetts. If using a ball valve, it shall be a T-handle type. A flexible gas connector, when used, must not exceed 3 feet.
9. Dormont 20-3122KIT-48 Gas Dryer Installation Kit 48-Inch Length by 1/2-Inch Supply
Feature
- Stainless steel dryer gas connector kit
- 1/2-Inch OD by 48-Inch length gas connector
- Kit includes one 1/2-Inch MIP (tapped 3/8-Inch FIP) fitting one 3/8-Inch FIP fitting and one 3/4-Inch MIP (tapped 1/2-Inch FIP) fitting
- Kit also includes one pipe thread sealant one leak test kit and one detailed installation guide
- Made in USA
Description
Product Description
BOLD GRAPHICS and VIBRANT COLOR-CODING MAKE CONSUMER S SELECTION QUICK and EASY KITS ARE IDEAL FOR NEW INSTALLATIONS, APPLIANCE RELOCATIONS, OR BRASS CONNECTOR REPLACEMENTS INCLUDES EASY-TO-FOLLOW TRILINGUAL INSTALLATION INSTRUCTIONS and LEAK CHECK and SEALANT PACKETS KITS CONTAINS ALL PARTS NEEDED FOR AN EASY INSTALLATION CONTENTS: 1 2 O.D. 48 STAINLESS STEEL GAS CONNECTOR and 3 FITTINGS: 1 2 F.I.P. TAPPED 3 8 F.I.P. 3 4 F.I.P. TAPPED 1 2 F.I.P., 3 8 F.I.P. ANSI Z21.24 CSA 6.10 ANSI Z21.75 CSA 6.27 PRESSURE RATING UP TO 1 2 PSI
This Dormont gas connector is CSA Design Certified domestically and internationally for indoor and outdoor use with natural, manufactured, mixed, liquefied petroleum, and LP-gas air mixtures Durable, naturally corrosion-resistant 304 stainless steel construction offers an exclusive no-neck design to increase flexibility Quality flared end fittings create a metal to metal seal to ensure integrity in critical applications Manufactured domestically in the USA, all Dormont gas connectors are 100 percent leak tested to ensure consistent quality you can trust.
From the Manufacturer
This Dormont gas connector is CSA Design Certified domestically and internationally for indoor and outdoor use with natural, manufactured, mixed, liquefied petroleum, and LP-gas air mixtures Durable, naturally corrosion-resistant 304 stainless steel construction offers an exclusive no-neck design to increase flexibility Quality flared end fittings create a metal to metal seal to ensure integrity in critical applications Manufactured domestically in the USA, all Dormont gas connectors are 100 percent leak tested to ensure consistent quality you can trust.
10. BrassCraft CSSD114R-72 X Gas Appliance Connector
Feature
- 3/8 In. ID (1/2 In. OD) x 72 In. corrugated stainless steel with corrosion resistant coating
- Safety+PLUS Excess Flow Valve helps protect against gas fires and explosions – 3/8 In. Female Flare or 1/2 In. MIP connection to gas supply or gas ball valve
- Approved for indoor and outdoor use. 100% Leak Tested
- Use with natural, manufactured, mixed and liquefied petroleum (LP or propane) gases and LP gas-air mixtures
- CSA certified. Designed, machined & assembled in the USA
Description
BrassCraft’s 3/8 In. Female Flare (1/2 In. MIP) EFV x 1/2 In. MIP x 72 In. Safety+PLUS Gas Appliance Connector is 1/2 In. OD (3/8 In. ID) with a maximum operating capacity of 49,100 BTU’s. This Safety+PLUS gas connector combines excess flow technology with the advanced corrosion resistance of ProCoat, to provide a safer gas connector for home and family. In the event of a gas line rupture or disconnect, the Safety+PLUS valve restricts gas flow at the appliance to a non-hazardous level. This immediate action helps avert the potential for a dangerous release of gas into the home. BrassCraft’s stainless steel gas connector is protected with a proprietary polymer coating designed to withstand prolonged exposure to harsh household cleaning, plumbing repair and masonry products. ProCoat coating is applied to the corrugated stainless steel connector using advanced powder-coat technology. Unlike conventional dipped or sprayed coatings, the ProCoat coating is baked directly on the connector surface at high temperatures to provide a uniform coating over the entire length of the connector. The coating is applied only after the connector has been 100% leak tested, prior to nut and fitting assembly. This process results in the most complete corrosion resistance available.
Conclusion
By our suggestions above, we hope that you can found Gas Line For Dryer Installation for you.Please don’t forget to share your experience by comment in this post. Thank you!