569 reviews analysed
1. Interior Car Lights, Govee Car LED Strip Light Upgrade Two-Line Design Waterproof 4pcs 48 LED APP Controller Lighting Kits, Multi DIY Color Music Under Dash Car Lighting with Car Charger, DC 12V
Feature
- ➤Upgraded Two-Line Design – Longer wires, suitable for any model cars. The lights tape’s back come with strong 3M adhesive, two lines connect with four strip lights, no need assemble the strip light, more easy to install and hide, keep your car clean and tidy. This cigarette lighter plug has switch and indicator light, built-in fuse, effectively protect the vehicle lights.
- ➤Two Simple Control Methods – Forget the remote what easy to lose, we provide a more convenient and fashion controller, enjoy to change the color, brightness, music mode. And you can stick the controller on the nearby next you for safety drive. What’s more, you can use the “Govee Home” APP to control the light.
- ➤Music Sensor – Built-in high sensitivity mic, spectrum with light and colors adjusting automatically base on the ambient sound, and then the led lights will change their colors following the music rhythm, increase safety of driving in daytime and nighttime.
- ➤Multi-Colors – Come with RGB car LED strip, Infinitely DIY colors over 16 million colors and different tones for selection, you can customize your own unique color modes to perfect enhancement for upgrading your car.
- ➤Safe to Use – Car LED light strip has a working voltage of 12V and powered by car charger are equipped with short circuit protection and memory function. Waterproof, extremely low-heat, touchable and safety for children.
2. REXING Smart Hardwire Kit Mini-USB Port V1 V1P WiFi Version and V3 Dash Cams
Feature
- Made to use with Rexing V1 WiFi Version, V1P WiFi Version and V3 dash cams. NOTE: This product is NOT intended to be used with the Rexing V1LG, V1P 3rd Gen, or V1P Pro.
- Input: DC12V-24V. Output: 5V, 1.5A, Mini-USB Port
- Low voltage protection: 11.4V
- Cable Length: 13ft
- Note: The kit comes with a 15A Mini type fuse, you can connect your own fuse adapter if needed.
3. VanTop V9H Dash Cam Hardwire Kit, 11.5ft Mini USB Hard Wire Kit for Dashcam Converts 12V-24V to 5V/2.5A w/Fuse Kit and Installation Tool, Low Voltage Protection for Dash Cameras
Feature
- Upgraded Automatically Detection Device – VanTop V9H hardwire kit will automatically detect the state of the car ignition to start recording video without a manual setting. An upgraded automatically detection device to make it easier to run a dash cam.
- Multiple Security Protection – With low voltage protection, V9H hardwire kit will automatically cut off the power after 60s when the voltage is lower than 11.6V/23.5V (it depending on your vehicle). More security protection like over-current, short-circuit, reverse connection, and overheat.
- 24 Hours Surveillance – With VanTop V9H hardwire kit, the continuous power supply makes parking monitoring function more reliable. Besides, supported by the time-lapse shooting function to maximize the advantages of memory.
- High Compatibility – VanTop V9H hardwire kit works for almost all car mini USB devices, such as dash cam, mirror dash cam, GPS navigator, and radar detector. Specially designed for VanTop H610/H609 mirror dash cam and more VanTop models.
- Easy Installation – You will get 1 x hardwire kit, 4 x fuse taps and blade fuses, 1 x easy pry tool, and 1 x quick guide. Simple hidden wiring keeps the car neat and tidy and releases the cigarette lighter for connecting to more devices. TIPS: Please read the quick guide carefully before use.
Description
VanTop V9H Dash Cam Hardwire Kit
Specification
Input Voltage: DC12V/24V
Output Voltage: 5V-2.5A Max
Working Temperature: -40~160°F
Over-current Protection: 2.5A
Low Voltage Protection: 11.6V±0.2/23.5V±0.2
Connector Type: Mini USB
Cable Length: 3.5M/11.5FT
Package List
1 x Hardwire Kit
4 x Fuse Tap
4 x Blade Fuse
1 x Easy Pry Tool
1 x Quick Guide
TIPS
1)We strongly recommend the professional installation of the Hardwire Kit.
2)Please make sure the ignition is off before installing the Hardware Kit.
3)Carefully utilize the tool to test and check the polarity and grounding before confirming the installation.
4)For safety reasons, we strongly recommend that you do not use any fuse slot used by any of your vehicle’s critical components, such as the Air Bags.
Installation Steps
Step 1: Connect the Yellow Wire of the Hardwire Kit with one type of Fuse Taps that your vehicle requires.
Step 2: Connect the Fuse Tap to the positive terminal of your Constant Fuse Slot.
Step 3: Connect the Red Wire of the Hardwire Kit to the positive terminal of the ACC Fuse Slot in the Fuse Box. ACC Fuse Slot only has power when the ignition is on.
Step 4: Crimp the Black Wire and screw it down to any non-costed metal bolt/screw in your vehicle to ground it.
Step 5: Connect the Mini USB connector of the Hardwire Kit to the Mini USB input of your Dash Camera, and then the installation is completed.
4. Vantrue 10ft Mini USB 12V-24V to 5V Dash Cam Hardwire Kit with Mini/ACS/ATO/Micro2 Add a Circuit Fuse Holders, Low Voltage Protection for Mini USB Dash Cams, GPS Navigator, Radar Detectors
Feature
- 【Compatible 12 – 24V Vehicles】This hardwire kit connects the camera directly to the car, truck, bus, suvs, or big rig for continuous power, accepts voltage from any type of vehicles runs on 12 – 24V.
- 【24/7 Parking Surveillance】Directly to the battery for constant 24hrs/7days power to protect against theft when your car is in the parking lot.
- 【Power Supply】Directly to the ignition wire for power only so it can turn on and off with the ignition and you don’t have to worry about plugging in the charger, or turning the dashcam on, or any such stuff.
- 【Low voltage protection】It has a smart low voltage protection system that will automatically shut off the power to your dash cam when the battery voltage drops to 11.4V or 22.8V, thus preventing it draining the battery.
- 【Mulitiple uses】Mini USB plug compatible with all mini usb dash cams such as Vantrue N2 Pro/N2/X3/T2/N1 Pro/X1, GPS navigator and radar detector etc, it always frees up the cigarette lighter for other devices.
5. APEMAN Dash Cam Hardwire Kit for C450 Series A, DC 11.5V-40V to 5V Car Charger Power Kit, Build-in G-Sensor and Low Voltage Protection for Dash Cameras
Feature
- Fits for APEMAN C450 Series A – With Mini charging port converters, the kit is basically fit for Mini port Dash Cams or Car Charger like APEMAN C450 Series A
- Compatible 11.5–40V Vehicles – This Hardwire Kit connects the camera directly to the car, truck, bus, suvs, or big rig for continuous power, with wide range of input voltage(Voltage between 11.5-40V), suitable for most of car mini USB device on the market.
- Build-in G-SENSOR – The dash cam automatically shuts down 5 minutes after the car is turned off. At this time, the G-SENSOR in the OBD starts to work (in the monitoring state). Once the car is vibrated, the OBD will be powered on to turn on the recorder. When there is no vibration signal, the driving recorder will automatically shut down after 1 minute, which will save the battery.
- 24 Hours Parking Surveillance – The hard-wire kit connected to OBD-II connector of your car, can uninterruptedly supply power for dash camera for 24 hours. It can even supply Directly to the battery for constant 24hrs/7days power to protect against theft when your car is in the parking lot.
- Low Voltage Protection – With a smart low voltage protection system, the camera will power off automatically when the battery voltage lower than to 11.5V, thus preventing it draining the battery.
Description
APEMAN Hardwire Kit for Mini USB Dash Cam APEMAN C450 Series A
It’s a must-have if you need 24/7 parking guard with your dash cam. It connects the camera directly to the OBD-II connector of your car under the dash cam for continuous power from the vehicle’s battery. When the car is driving, it can be used replacing the ordinary car charger, and the car ignition will not be powered off.
APEMAN Hardwire Kit is specialized for APEMAN’s Star Dash Cam – C450 Series A or other Mini charging port car recorder.
Specifications:
★ Connector: Mini USB
★ Input Voltage Range: 11.5V-40V
★ Output: 5V /1.5A
★ Working Temperature:-10-60℃
★ Cable Length: 3M
★ Low Voltage Protection: When voltage lower than 11.5, automatically cut off the power
Installation Instruction:
1.Mount your camera where it has full vision of your road
2.Run the wiring towards to the OBD-II connector of your car
3.Hide the wire under the headboard
4.Remove the 3M Sticker of the G-sensor on hardwire kit, then firm to the windshield where close to dash cam.
5.Connect the hardwire kit with the dash cam and power the camera for using.
Warm Tips:
★ If you don’t have experience on installing the hardwire kits for the dash cam, please ask to APEMAN Customer Team for professional help, we are always here to serve you.
6. AUKEY Dash Cam Hardwire Kit with Motion Detection Sensor, Dashboard Camera Hardwire Kit for DR01, DR02, DRA1, DR02 J, DR03 & DR02 D Dual Dash Cameras, and More
Feature
- Dash Cam Upgrade: Maintain automatic monitoring of your vehicle when it’s parked and the ignition is off. Don’t leave your car unprotected
- 360° Protection: The inline sensor detects motion within 2–3m / 6.56–9.84ft in all directions. It instantly triggers the dash camera to capture any activity, and the dash camera automatically stops recording and stands by after 2–3 minutes if no further motion is detected
- Simple Setup: No electrical wiring or tools needed to install this kit. Plugs into the OBD-II DLC port under the dash (in all cars sold within the U.S. since 1996)
- Parking Mode Compatibility: Works with AUKEY DR01, DR02, DR02 D, DR02 J, DRA1 and many other mini-B dash cameras with parking mode (motion detection recording)
- Package Contents: AUKEY PM-YY Dashboard Camera Hardwire Kit, User Manual, 45-Day Money Back Guarantee and 24-Month Product Replacement Warranty Card
Description
Dash Cam Companion
Investing in a dash camera is a smart choice for personal protection and insurance purposes, but most dash cameras power off when the car ignition is switched off, leaving your car unprotected. The AUKEY PM-YY Dashboard Camera Hardwire Kit maintains power supply to your dash camera, solving this problem.
Constant Car Protection
The PM-YY connects your dash camera to your car’s battery so the camera can receive power and record any activity after the ignition is turned off. To minimize battery draw in parking mode (motion detection recording), the inline motion detection sensor only activates the camera if motion is detected (within 2–3m / 6.56–9.84ft), and the camera enters standby again after 2–3 minutes if no further motion is detected. The hardwire kit’s 11.6V cutoff also prevents excessive discharge.
Hassle-Free Setup
Simply plug the connectors of this cable into the OBD-II DLC port of your car’s fuse box and the mini-B port on your camera. Use the 3M adhesive pad to fasten the motion detection sensor to your car’s windshield in seconds. No fuss with fuses or wiring.
Discreet Cable Management
The 10-foot hardwiring cable fits neatly and almost unnoticed in your car, elevating your dash camera to the next level with greater integration and functionality. Also, with a car charger port freed up, you have more ports to charge your devices. This hardwire kit is a small but powerful dash camera accessory for your AUKEY DR01, DR02, DR02 D, DR02 J, and many other dash cameras with mini-B power input port and parking mode.
45-Day Money Back & 24-Month Warranty
All AUKEY products are backed by our 45-Day Money Back Guarantee and 24-Month Product Replacement Warranty.
7. 15ft MicroUSB & MiniUSB Dash Cam Hardwire Kit with Mini/LP Mini/ATO/Micro2 Fuse, Micro to Mini (and Type-C) Port Adapters and Battery Drain Protection System
Feature
- ONE FITS FOR ALL: With Micro to Mini (left angled) and Micro to Type C port converters, the kit is basically fit for ALL Dash Cams or Car Charger like NuCam DL, Wireless Charger Phone Holder Nucharger Auto, Rexing, ROAV, Anker, DDPai, Papago etc. Also, it comes with most popular fuse types including Low-Profile Mini, Mini, ATO(Regular), and Micro2. It has left angled mini USB head. For right angled mini USB head, please search B0787LD92N.
- ENOUGH LENGTH: Overall 15ft hardwire kit can be installed basically on All vehicles. Input length: 3ft, Output length: 12ft.
- BATTERY DRAIN PROTECTION SYSTEM: Device powers off when vehicle battery voltage drops below 11.6V for protection purpose to save battery to start your engine. When car batteries are new, they’re around 12.5 Volts or more. It’s also suitable for 24V systems.It is recommended to turn on parking mode for your dash cam to save your battery power. Contact us for higher cutoff voltage model if your battery is drained too low to start your engine.
- EASY INSTALLATION: Installation is easy and clean without any help from professionals! However, our customer service is also immediately responsive if you do have questions.
- WARRANTY: One year free service for any question you are facing with this dash cam hardwire kit.
8. Meknic SV-PC01 Dash Cam Hardwire Kit with Battery Drain Protection System,2A Dash Cam Hardwire Fuse Kit For Car DVR Camera Or GPS Power Supply-Installation Manual Include (Mini USB)
Feature
- ✅ Meknic Dash Cam Hardwire Fuse Kit for car DVR recorder that Use Right Elbow Angle Mini USB,24 Hour Surveillance and Protects Against Battery Dying
- ✅ No need for cable from car cigarette lighter socket, replace it with a permanent hidden cable Installation in minutes with little to no expertise required. Simply piggy backs from car fuse box socket for Meknic Car Dash Cam Hardwire Fuse Kit
- ✅ Meknic Hardwiring Kit Use a Fuse Tap or Wire Tap to Draw Power From Fuse Block Or Wire, No damage to the original circuit of the car
- ✅ Meknic Cam Hardwire kit With low voltage protection function, protect car’s battery, 12V-11.2V(Cut Off Automatically) 24V-23.2V(Cut Off Automatically) to stop your car DVR working automatically
- ✅ Warranty: The company offers one year warranty and 100% satisfaction guarantee and 30-day, hassle-free return policy for Meknic Car Dash Cam Hardwire Fuse Kit.
9. Rexing Mini-USB Hardwire Kit for Rexing V1P 3rd Generation, V1P Pro, V2 Dash Cams
Description
Made to use with Rexing V1P 3rd Gen, V1P Pro, V2 dash cams. NOTE: This product is NOT compatible with the Rexing V1LG.
Input: DC12V-24V
Output: 5V, 2A, Mini-USB Port
Note: The kit comes with a 2A Mini type fuse, you can connect your own fuse adapter if needed.
10. ASC Car Stereo Radio Install Dash Kit, Wire Harness, and Radio Tool to Install a Double Din Aftermarket Radio for select Ford Lincoln Mazda Mercury Vehicles – Compatible Vehicles Listed Below
Feature
- Radio Dash kit and wire harness for installing an aftermarket Double Din size radio
- -Combo Kit for Aftermarket Radio Installation in Factory Radio Location -Double Din Radio Kit and Radio Wire Harness -Radio removal keys included -For select vehicles only. -Use to add an aftermarket radio to the factory vehicle wiring. -Standard wire coloring usually will connect color for color to aftermarket radio’s wire harness. -Black color radio kit -Designed specifically for the installation of Double-DIN radios -High-grade ABS plastic
- -Will not retain some features that go through the radio like rear dvd, steering audio controls, etc.- other adapters are needed for retention. -What’s Included? 1. Radio kit 2. Wire harness 3. Radio removal keys
- Compatible Vehicles: 1998 – 2002 Ford Crown Vic, 1998 – 2008 Ford Econoline, 2001 – 2003 Ford Escape, 2000 – 2005 Ford Excursion, 1999 – 2002 Ford Expedition, 1998 – 2003 Ford Explorer, 2001 – 2005 Ford Explorer Sport Trac, 1999 – 2003 Ford F-150, 1999 – 2004 Ford F-250/350, 2001 – 2003 Ford Mustang, 1998 – 2011 Ford Ranger, 1999 – 2003 Ford Windstar, 2002 – 2003 Lincoln Blackwood, 1999 – 2002 Lincoln Navigator, 1998 – 2002 Lincoln Town Car, 1998 – 2009 Mazda B Series Pickup,
- 1998 – 2002 Mercury Grand Marquis, 1998 – 2003 Mercury Mountaineer
Description
Combo Kit for Aftermarket Radio Installation in Factory Radio Location -Double Din Radio Kit and Radio Wire Harness -Radio removal keys included -For select vehicles only. -Use to add an aftermarket radio to the factory vehicle wiring. -Standard wire coloring usually will connect color for color to aftermarket radio’s wire harness. -Black color radio kit -Designed specifically for the installation of Double-DIN radios -High-grade ABS plastic – contoured textured and painted to compliment factory dash -Will not retain some features that go through the radio like rear dvd, steering audio controls, etc.- other adapters are needed for retention. -What’s Included? 1. Radio kit 2. Wire harness 3. Radio removal keys- Compatible Vehicles: 1998 – 2002 Ford Crown Vic, 1998 – 2008 Ford Econoline, 2001 – 2003 Ford Escape, 2000 – 2005 Ford Excursion, 1999 – 2002 Ford Expedition, 1998 – 2003 Ford Explorer, 2001 – 2005 Ford Explorer Sport Trac, 1999 – 2003 Ford F-150, 1999 – 2004 Ford F-250/350, 2001 – 2003 Ford Mustang, 1998 – 2011 Ford Ranger, 1999 – 2003 Ford Windstar, 2002 – 2003 Lincoln Blackwood, 1999 – 2002 Lincoln Navigator, 1998 – 2002 Lincoln Town Car, 1998 – 2009 Mazda B Series Pickup, 1998 – 2002 Mercury Grand Marquis, 1998 – 2003 Mercury Mountaineer
Conclusion
By our suggestions above, we hope that you can found Dash Wire Kit for you.Please don’t forget to share your experience by comment in this post. Thank you!