The Best Honeywell Central Vacuum Systems

Cen-Tec’s 93642 is designed to provide the cleaning accessories most often requested in a low voltage central vacuum hard floor and general-purpose attachment set. The 1.375” x 35 foot hose is longer than the industry standard 30 feet to insure you reach everywhere in your home. A hose with an inner diameter of 1.375” insures superior airflow and improved cleaning performance that also assists the performance of air turbine tools often used with low voltage hoses. Further, the hose allows for switch control to turn the central vacuum on and off at the handle. A 12” natural fill floor brush and fully automatic combination nozzle address hard surfaces, area rugs, and even carpeted surfaces. A premium chrome ratchet telescopic wand with the easy release button down feature and a full set of premium above the floor accessories address upholstery, stairs, table tops, crevices, and baseboards. The tool caddy clip lets them travel with you while you clean. The 93642 is compatible with all major brands of central vacuum including Eureka, Beam, Electrolux, Hoover, Cyclovac, Vacuflo, Vacumaid, MD, M&S, Husky, Canavac, Honeywell, and well as most regional brands.

The 94071 full feature central vacuum cleaning accessory package is designed to deliver all the premium features sought in an electric accessory package. The CT16QD power nozzle delivers on the three most sought benefits associated with an electric power nozzle: deep cleaning helping preserve carpet life, brushed edge cleaning, and excellent surface grooming of the carpet surface helping to maintain carpet appearance. The poly-v Quiet Drive system reduces noise and vibration from the power nozzle. A window over the agitator allows easy confirmation the nozzle is running. The 30 foot crush proof total control electric hose with direct connection features a 360 degree swivel handle and a three position switch allowing independent control of the power nozzle and the central vacuum. A full complement of accessories addresses the need for a hard floor brush solution and extends the benefits to all above the floor cleaning needs. The 94071 is compatible with all major brands of central vacuums including Beam, Electrolux, Eureka, Hayden, Vacumaid, Vacuflo, Cyclovac, Honeywell, Husky, Nutone, Canavac, MD, Imperium, and Galaxie as well as other regional brands.

Honeywell Central Vacuum SMP700

The 93367 is designed to complement all major central vacuum systems and is an ideal set of accessories for those concerned about black tools marking surfaces. The 1.25 inch inner diameter commercial grade vacuum hose is highly flexible with a smooth interior for superior airflow. Cen-Tec’s trademarked arc relax strain relief system covers the last 14 inches of each end of the hose and prevents kinking increasing hose life. The premium combination nozzle has a wheel system, metal base plate, and pivoting swivel neck that keeps the tool parallel to the surface of the floor for superior vacuuming. A five-piece accessory set with natural fill dusting and natural fill upholstery tool is ideal for all above the floor surfaces. The 93367 is lightweight, making it ideal for cleaning above the floor surfaces, stair risers, while reducing fatigue. The 93367 is designed to be compatible with all major central vacuum brands including: Beam, Electrolux, Eureka, Vacumaid, Vacuflo, MD, Cyclovac, Canavac, Honeywell, Galaxie, Imperium, and Nutone installed with valves that have approximately a 1.50 inch industry standard opening.

The 91431 is designed to be a general use straight air accessory set for the home, shop, or garage. Often it is used as a second tool set Complimenting the power nozzle or Turbine package that came with the central vacuum. Having a second tool set can save you time and effort moving a tool set from floor to floor in multi-story homes. The hose end is designed for what has historically been industry standard inlets and will activate a system with low voltage contacts in the wall valve. There were a few valves typically produced before 1980 which may use a micro-switch for activation of the vacuum. In most cases the 91431 will still work but the automatic activation of the system will not be delivered by the banded cuff. The set includes a full range attachments for most standard household cleaning jobs. This set is deal for a basement, garage, or general use in the home, especially on hard floor areas. The floor brush is ideal for cleaning hardwood, tile, stone, and vinyl.

The 93059 kit has a two position on off switch hose which creates a Circuit through the two low voltage electrical contacts in your inlet valve. You will see the wall end has a two metal contact Plates separated by a thin plastic landing. These Plates create the Circuit through the switch in the hose handle that permits control of your central vacuum. There is a small tab projecting from the top of the hose end that helps you orient the hose in your inlet. This tab should be located at the top of the inlet valve opening as you insert the hose end. The wave combination nozzle is designed to move from carpets to hard floor without the need to make an adjustment. There is a simple friction connection between the floor nozzles and the end of the telescopic wand to make changing tools easier. The wand ratchets at one inch intervals from 25 to 42 inches so you can adjust to a height comfortable for your use. Many find the 93059 an ideal second package to complement their electric brush kit for the portion of the home dominated by hard floor surfaces like the kitchen, family room, den, or basement. An Italian made ratchet chrome telescopic wand with nylon collar and a full set of soft vinyl accessories are ideal for cleaning above the floor. The accessories include a 5 inch natural fill dusting tool, a 13 inch vented crevice tool, and 5 inch upholstery tool with a built in brush strip ideal for stairs and the sofa, a mesh caddy bag collects everything between uses and the mesh allows you to easily see the tool you need through the bag.

The CT16QD is a premium featured electric carpet brush ideal for every home and all carpet types. The computer balanced agitator runs on smooth bearing for extended life and is visible through the view window to confirm its operation when engaged. The reinforced long life poly-v belt eliminates vibration and noise and is further protected by a reset that engages should the agitator become locked during operation. Simply clear the object which prevents the agitator from spinning and hit the reset button to return to cleaning. The CT16QD delivers on the three most requested features in a brush. Excellent embedded dirt collection protecting your carpet, excellent surface grooming maintaining carpet appearance, and superior edge cleaning. The premium integrated telescopic electric wand is designed for use with the quick release feature of the CT16QD and mates to the electric hose. The hose end is designed to fit industry standard direct connect inlet valves. The 12” hard floor brush has a natural fill to protect wood floors and accessories for above the floor cleaning. The 93422 is suitable for use with all major brands of central vacuum including Beam, Electrolux, Eureka, Vacumaid, Vacuflo, MD, Cyclovac, Canavac, Nutone, M&S, and Imperium.