Top 4 Itc Ch 3M

This Cool White, IllumaGrip LED Replacement Assembly includes the LED with pigtail and quick disconnects.

ITC’s 3″ Radiance LED overhead light fixture embraces energy saving benefits while providing a seamless transition from traditional halogen fixtures. Radiance overhead lighting provides high quality light output to illuminate your boat and RV spaces with the perfect amount of light. Offering 50,000 hours of illumination and a low energy draw, ITC’s Radiance fixtures are the perfect choice for your overhead lighting needs.

Product Description

Scotch Tape 2520 is an 8-mil thick, highly conformable, premium-grade tape that’s suitable for bus bars, motor leads and service drop connections. It withstands temperatures up to 221 degrees F (105 degrees C).

From the Manufacturer

Scotch® Electrical Insulating Varnished Cambric Tape 2520 insulates and seals electrical components. Resistant to punctures and cut-through, the straight cut woven cotton cambric fabric maintains its insulating properties through normal wear and tear. A pressure-sensitive, non-corrosive rubber resin on the backing keeps the tape in position after application. Flexibility offers ease of application and moisture resistance protects electrical connections. Cambric tape is often used for insulating joints requiring rapid and clean re-entry such as motor leads and service drops. Operating temperature range is 32°F (0°C) to 220°F (105°C).

This 8-mil thick, yellow varnished electrical tape is rated for Class A 220°F (105°C) applications. Typical tensile strength is rated for 50 lbs/ inch.

For more than a century, 3M™ has applied innovation and technology to improving our customers’ lives and supporting their business goals. Today the company, from its headquarters in St. Paul, Minnesota, serves industrial and commercial customers and consumers in nearly 200 countries. 3M™ electrical products for industrial, commercial and residential construction and maintenance include electrical insulators, connectors, splices, terminations, terminals, fire-resistant tapes, cable ties, portable labelers, and diagnostic and detection products. The 3M™ brand, across thousands of products, represents consistency, superior quality, and value.

Product Description

The 3M SR Cutter is a plastic rotary cutting tool with an attached 1/4″-28 male threaded metal mandrel for use on slow speed right angle drills. The SR Cutter works quickly and efficiently to peel off sealants or other thick coatings with minimal to no abrasion to the underlying base material, replacing tedious scraping by hand and messy chemical solvents.

From the Manufacturer

A Great Alternative to Tedious Hand Scraping
The 3M SR Cutter is designed to save time and increase productivity for cleaning operations typical in the aerospace industry. Two different sizes are available to enable effective coating removal—No. 3 for flat surfaces and No. 8 for cleaning on and around rivets or other fasteners. The cylindrical blades work both horizontally and vertically against the workpiece to cut through sealants such as polysulfide, polythioether, polyurethane, RTV sealants and silicones. The plastic blades work effectively without the operator having to pause and resharpen them. The SR Cutter works fast and helps eliminate follow-up work for repainting or repairing damaged coatings.

Cleanly Replaces Chemical Solvents
Not only is the 3M SR Cutter a great alternative to hand scraping, but it works without the use of messy chemical solvents. It enables operators to remove sealants and residues immediately, without having to wait for chemicals to act or spending time and effort handling and cleaning up a hazardous mess. Your only waste is the sealant itself.

Using the 3M SR Cutter

• No. 3 Cutter: For fillet seals and flat applications, place the No. 3 SR Cutter at head of sealant bead so that the side of cutter contacts the sealant. Apply firm pressure downward onto the sealant and use low rotational speed (throttle down on drill) to remove sealant from one spot without moving the drill back and forth. When the substrate is exposed, increase the rotational speed of the drill and move the tool along the strip of sealant, making sure that the cutter blades adjacent to the substrate rotate into the remaining sealant bead.
• No. 8 Cutter: For fastener heads, be sure that the inner diameter of the No. 8 SR Cutter will completely fit over the head of the fastener. Place the cutter on top of the fastener with firm pressure. Using the drill throttle, run at low speed to cut away sealant from around the fastener. Remove the sealant by “jogging” the drill in a start-stop fashion several times—this prevents unwanted frictional heat that may degrade the sealant or blunt the cutter.