Finding your suitable readers for 200mhz 1x 10x oscilloscope probe for hp tektronix is not easy. You may need consider between hundred or thousand products from many store. In this article, we make a short list of the best readers for 200mhz 1x 10x oscilloscope probe for hp tektronix including detail information and customer reviews. Let’s find out which is your favorite one.
859 reviews analysed
1. Hantek 2X 200MHz Oscilloscope Switchable Clip Probes with Accessory Kit
2. Sumnacon 2Pcs 100 MHz 600V DC High Sensitivity Oscilloscope Clip Probe 10:1 and 1:1 Switchable with Mini Alligator Clip and Ground Lead
3. Inkbird 12 periods Timer Stage ITC-310T-B Digital Heating & Cooling Pre-wired Temperature Controller For Home brewing, Greenhouse, Heating mat
Feature
- [Multipurpose] Mainly used to control temperature during fermentation process of beer and wine brewing, also widely used in home brewing, aquarium, pet breeding, and hatching, etc.
- [Multiperiod] Can be set 12 different temperatures in 12 different periods of time, and the timers will start when the setpoint temperature is reached.
- [Large Time Range] Can be set single or cycle control mode. Wider time setting range: 1~999(min/hr), 1~90(days)
- [Mode & Function] Support °F/°C mode and easy to set. Alarm when over-temperature and sensor error.
- [Dual Relay Output & Display] Dual relay output, be able to connect with refrigeration and heating equipment at the same time. PV and SV dual display windows, be able to display measured temperature and setting temperature at the same time.
Description
ITC-310TB is a dual-relay outlet thermostat with programmable timer function, which can be set to automatically control 12 periods timer stage with different temperatures.
The ITC-310TB is mainly used to control temperature during fermentation process of beer and wine brewing. It also widely used in home brewing, aquarium, pet breeding, hatching.
What’s more, it’s multipurpose for you to use in boiler temperature control, geothermal temperature control, heating pump constant temperature cycle, and strain culture fermentation.
(Seed sprouting, electric heating, electric oven, over-temperature protection and automatic temperature control system of all kinds of electrical equipment, etc.)
Specification:
Temperature Control Range : -50~120°C /-58~248°F
Temperature Resolution : 0.1°C / 0.1°F
Measuring Accuracy : ±1°C (-50~ 70°C) / ±1°F (-58~160°F)
Temperature Control Mode: On/Off Control, Heating and Cooling
Timing Accuracy: 24 hours±1.7s
Periods of Time Max: 12 periods
Cycle Setting: 1-999 times cycle, or 00 infinite cycle
Input Power: 100 ~240VAC, 50Hz/60Hz
Control Output Current: Max.10A
Power: Max. 1200W (110V)/ 2200W (220V)
Alarm: High/ Low Limit setting Alarm
Sensor Type: NTC Sensor (including)
Sensor Length: 2m / 6.56ft
Relay Output: Cooling (10A,100-240VAC)
Heating (10A,100-240VAC)
Input Power Cable Length: 1.5m ( 5ft )
Dimension: 140x68x33 mm(body)
Operating Ambient Temperature: -30~ 75°C / -22~ 167°F
Storage Condition Temperature: -20~60°C / -4~140°F
Humidity: 20~85% (No freeze or moisture condensation)
Warranty: 1 Year
Package included:
1 x ITC-310TB Thermostat with Timer
1 x Manual
4. Fosa Replacement Wireless EM7455 for Dell DW5811e 3P10Y Qualcomm 4G LTE WWAN NGFF Card Module
Feature
- LTE Support (North America / EMEA) -B1 (2100 MHz), B2 (1900 MHz), B3 (1800 MHz), B4 (1700 MHz AWS), B7 (800 MHz-DD), B7 (800 MHz-B), B7 (2600 MHz), B8 (900 MHz), B8 (900 MHz), VITAMIN B12.
- B25 (1900 MHz), B26 (850 MHz), B29 (700 MHz-D block), B30 (2300 MHz), B41.
- HSPA + Support Band (Global) -B1 (2100 MHz), B2 (1900 MHz), B3 (1800 MHz), B4 (1700 MHz AWS), B5 (850 MHz), B8 (900 MHz).
- Best replacement for your cracked / damaged / faulted Module Card.
- Installation instruction is not included and professional installation is recommended.
5. SOTO Regulator stove ST-310【Japan Domestic genuine products】
Feature
- ■ Dimensions: width 170X depth 150X height 110 (when using the body only), 110 (at the time of storage) mm
- ■ calorific value: 2.9kW (2,500kcal / h) (when ST-760 use)
- ■ use time: about 1.5 hours (at the time of ST-760 1 this use)
- ■ use container: SOTO product special container (ST-760, ST-700)
- ■ ignition system: a piezoelectric ignition system
Description
The low temperature of the outside air, eliminating the weaknesses of the prone CB cans reduced-fired micro-regulator. Always exert a certain firepower even in an environment of the outside air temperature 25 ℃ ~ 5 ℃. Also, in addition to the characteristics of the less susceptible to micro-regulator effect of the drop-down due to continuous use, these can be done even cooking of several persons with be equipped with a large Gotoku that can be a large pot use of up to a diameter of 19cm.
6. 200Mhz Oscilloscope Probe Clip Scope Test BNC End Probe P2200 10X/1X Black with Adjust Tool Kits
Feature
- BNC END CABLE: This oscilloscope probe is good oscilloscope accessories, has a cable with standard BNC end, suitable for BNC interface oscilloscope.
- ADJUSTMENT TOOL: There is a adjustment tool that can adjust compensation capacitance to match oscilloscope.
- 1x /10x : This probe is 200MHz oscilloscope probes with a switch for either 1x or 10x attenuation, can meet your different needs.
- DISTINGUISHED BY COLOR : There are marking circles in different colors help to identify different channels, you can tell the channel quickly and easily.
- STABLE: This probe has stable performance, providing several accessories ,suit for professional testing.
Description
Feature:
BNC Head probe is compatible with most the BNC oscilloscopes. High quality ground clip is very solid, it is not easy to disconnect. Attenuation ratio of this oscilloscope probe is 1X/10X. Easy to install and convenient to use. Compensation capacitance can be adjusted.
Specification:
Model P2200(European standard)
Attenuation ratio 1X/10X switching
Rising time <1.75ns
Input resistance 1MΩ/10MΩ
Input capacitance 1X:85pF-120pF 10X:18.5pF-22.5pF
Compensating range 10pF-35pF
System bandwidth 1X:DC-6MHz 10X: DC-200MHZ
Input voltage 1X:<300VDC + AC Vp-p 10X:<600VDC+ AC Vp-p Working temperature range -15°C ~ +75°C
No working temperature range -20°C ~ +60°C
Humidity ≤85%(Relative humidity)
Weight 118g
Package List:
1 x Oscilloscope Probe
1 x BNC Connector
1 x Spring
1 x Adjust Tool
1 x Pair Cap
8 x Color Circle
7. Micsoa BNC Test Leads Set, Oscilloscope Probes BNC to Alligator Clips, BNC to Mini Test Clips, BNC to BNC Cable Leads 3 Pack
Feature
- PVC
- Imported
- Good Value Pack – Micsoa MICTL-037 BNC Test Leads Set contains BNC to Alligator Clips, BNC to Mini Test Clips, BNC to BNC Coaxial Cable
- Premium Material – High quality BNC (Male) test leads assemblies featuring high performance low loss 50-Ohm coaxial cable (OD4.0mm)
- Easy And Safe To Use – Easy for installation and safe to use. Keep this handy lead on hand for your next electronics project
- Expand Testing Capability – Converts BNC (male) cables / connectors to mini test clips/ alligator clips for test versatility and capability
- Application – Applies to standard BNC interfaces. Such as Oscilloscopes, signal generators, video surveillance, etc . Ideal for testing work in labs, service shops, schools, home and industry
8. Receiver for LKV373A HDMI Extender Kit over CAT5/6/7 up to 390 ft/120m
Feature
- LKV373A Version 3.0 Receiver,works with LKV373A Version 3.0 120m HDMI extender kit only
- Please check the version for your sender(transmitter), if your sender is version 2.0, please do not buy it
- Supports up to 1080p (1920×1080) resolution,Extends the HDMI signal up to 390ft/120m
- Works with Cat5 / Cat5e / Cat6 / Cat7 ethernet cable following the standard of IEEE-568B
- We stand by our products 100% with a 12-month warranty
Description
The LKV373A HDMI receiver converts HDMI signal to standard TCP/IP and transmit by CAT5e/6 Cable or LAN. With the advantage of TCP/IP standard, it can transmit HDMI signal source from HD STB,DVD,PS3,HDMI display card etc to HD projector, DLP,LCD,LED and other audio visual equipments.It needs to match our LKV373 sender to use.
Specification:
Supports resolutions: 480i@60Hz,480p@60Hz,576i@50Hz, 576p@50Hz,720p@50/60Hz,1080i@50/60Hz, 1080p@50/60Hz
Link Connector(Receiver): UTP/STP CAT5e/6
Power Consumption: 3W (max) each
Relative Humidity: 20%~90%
Power Supply: DC 5V/1A
Dimensions: 110 x 58 x 26 mm
Cat5e/6 cable: standard IEEE-568B
Package Included:
1 x HDMI Extender Receiver
1 x DC 5V/1A power Supply
1 x User manual
Please note: This listing only include a Receiver (not include sender).This item is only new 3.0-Version,before you buy it,please check the version for your sender(transmitter), if your sender is old version,please do not buy it.
9. Extech HW30 HeatWatch Humidity and Temperature Stopwatch
Description
Digital Stopwatch, Timing Range Count up to 9 hr., 59 min., 59 sec., Accuracy +/-5 Seconds per Day, Display 2-line LCD, Elapsed Time Yes, Split Time Yes, Calendar Display Alarm clock, hourly chime, calendar, 12/24 Hour Clock Operation Yes, Countdown Timer Yes, Lap Counter 99, Memory Recall 30 lap/split memory, Features Temperature, Humidity, Heat Index, Temp. Range 14 to 122 F, Battery Type CR2032, Includes Battery, 39″ Neck Strap, Instructions, Manufacturers Warranty Length 1 yearWARNING: California ResidentsThis product can expose you to chemicals including Styrene, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
10. Proster Oscilloscope Multimeter 4000-Count Intelligent Oscilloscope Automatic Waveform Capture Function Multimeter Analog Bar Graph 200k High-speed A/D Sampling 5 KHz-500 KHz Frequency
Feature
- 【Precise Oscilloscope Multimeter】When measuring AC/DC voltage/current/frequency, one-key transform to oscilloscope mode. 200KHz bandwidth high-seed A/D data collecting. Independent monitoring of 100 sets of data and 10 waveforms. 41-segment analog bar display.
- 【Multi-function Multimeter】4000 counts auto range, DC voltage 1000V, AC voltage 750V, DC/AC Current 20A, Resistance 20MΩ, Capacitance 20μf, Frequency 200KHZ, Diode / Continuity Test / Transistor Test / cycle (5H-5MHz automatic switching range, max input 380VAC)
- 【Accurate & Fast Sampling Speed】200K SPS high-seed A/D data collecting, 4000counts Autoranging One-button automatic waveform capture, which maintains waveforms and data during measurement.
- 【LCD Backlit Color Screen】Backlit color screen display. Independent monitoring of 100 sets of data and 10 waveforms. 41 sections of analog strip display. easy to read data, simple and practical.
- 【Practical Meter】Oscilloscope mode is designed for easily observe test waveforms, to quickly solve complex problems in electronics, factory automation, power distribution and electronic engineering equipment.
Conclusion
By our suggestions above, we hope that you can found 200Mhz 1X 10X Oscilloscope Probe For Hp Tektronix for you.Please don’t forget to share your experience by comment in this post. Thank you!