The Best 2 Inch Ball Valve Brass

This SuperWhole WJ2300V Series ball valve is made of Stainless Steel 316 for higher corrosion resistance than Brass/copper and has a plastic-covered lever handle for on/off manual control. It has PTFE (polytetrafluoroethylene) seats and seals for resistance to chemicals, moisture, and high temperatures. This inline valve has a Standard port flow and 1/4" female National Pipe Taper (NPT) threads for connecting two male threaded pipe fittings going in the same direction. It is pressure rated to over 600 pounds per square inch (psi) for cold working pressure (CWP), Over 150 psi for saturated steam. This mini ball valve is suitable for use in water, oil£¬chemicals£¬petroleum and gas applications.

Ball valves use a spherical disc to control the flow between pipes, tubes, or hoses. Flow is allowed when the hole that pierces the ball-shaped disc is in line with the inlet and outlet of the valve and is blocked when the ball is horizontally swiveled 90 degrees, so that the hole of the ball is perpendicular to the opening of the valve.Ball valves can be referred to as full port or reduced port (also known as regular or standard port) depending on the inner diameter or the valve. A ball valve is full port if the hole of the ball is the same size as the inner diameter of the connecting pipeline (resulting in lower friction) and termed reduced port if the hole of the valve is one pipe size smaller than the pipe, resulting in less flow through the valve than through the shaft of the pipe.Ball valves may have a handle or lever that aligns with the ball¡¯s position (open or closed) for manual operation. They are primarily used in air, gas, liquid,chemicals£¬petroleum and steam applications.

SuperWhole International distributes professional pipe, fittings, and valves . Meets International Organization for Standardization (ISO) standard 9002.

Package Included:
1 piece x 2" ball valve

This Midline Valve Premium Brass Ball Valve is the ideal choice for water control in your piping systems. It features a full-port ball, 1/4 turn vinyl lever handle, FIP connections, PTFE stem packing seal and blow out proof stem. Manufactured with the highest quality materials and workmanship, it will serve your plumbing needs faithfully.

This Series ball valve is made of Stainless Steel 316 for higher corrosion resistance than Brass/copper and has a plastic-covered lever handle for on/off manual control. It has PTFE (polytetrafluoroethylene) seats and seals for resistance to chemicals, moisture, and high temperatures. It is pressure rated to over 600 pounds per square inch (psi) for cold working pressure (CWP), Over 150 psi for saturated steam. This mini ball valve is suitable for use in water, oil,chemicals, petroleum and gas applications.
Ball valves use a spherical disc to control the flow between pipes, tubes, or hoses.
Flow is allowed when the hole that pierces the ball-shaped disc is in line with the inlet and outlet of the valve and is blocked when the ball is horizontally swiveled 90 degrees, so that the hole of the ball is perpendicular to the opening of the valve.
Ball valves can be referred to as full port or reduced port (also known as regular or standard port) depending on the inner diameter or the valve.
A ball valve is full port if the hole of the ball is the same size as the inner diameter of the connecting pipeline (resulting in lower friction) and termed reduced port if the hole of the valve is one pipe size smaller than the pipe, resulting in less flow through the valve than through the shaft of the pipe. Ball valves may have a handle or lever that aligns with the ball’s position (open or closed) for manual operation.
They are primarily used in air, gas, liquid,chemicals petroleum and steam applications.

Meets International Organization for Standardization (ISO) standard 9002.

Package Included:
1 piece x2″ ball valve

Global ball valve with full port. Made of forged brass. For water and air only. Maximum temperature 248 degree F (120 degree C). Maximum 600 psi pressure.

From the Manufacturer

2-Inch IPS Lead Free Brass Ball Valve meets NSF61 Standards and is Lead Free Brass AB1953 certified.

Watts 2-inch lead-free 2-piece full port brass ball valve is suitable for a full range of liquids and gases in residential and commercial applications. These ball valves features an adjustable packing for longer service life, a bottom loaded blow-out proof stem for safety, a fluorocarbon elastomer stem o-ring to prevent stem leaking at installation, and are rated to 600 psi wog and 150 psi wsp.

This is a lead free Everflow Supplies full port ball valve, from the economy line, constructed from forged brass with a chrome plated brass ball. In particular, it has 1 inch female threaded connections for use with ips pipes. Furthermore, the valve is upc approved and complies with nsf 61-g, with a maximum pressure of 150 psi for saturated Steam and 600 psi wog. In addition, the valve is operated with a chrome plated brass handle with a vinyl grip.

This is a lead free Everflow Supplies full port ball valve, from the economy line, constructed from forged brass with a chrome plated brass ball. In particular, it has 1-1/2 inch female threaded connections for use with ips pipes. Furthermore, the valve is upc approved and complies with nsf 61-g, with a maximum pressure of 150 psi for saturated Steam and 600 psi wog. In addition, the valve is operated with a chrome plated brass handle with a vinyl grip.