Finding your suitable readers for 2 hp intex salt water pool pumps is not easy. You may need consider between hundred or thousand products from many store. In this article, we make a short list of the best readers for 2 hp intex salt water pool pumps including detail information and customer reviews. Let’s find out which is your favorite one.
551 reviews analysed
1. Pentair 011028 IntelliFlo VS Pool Pump, Almond
Feature
- Control keypad can be rotated for convenient orientation on the pump or wall mounted with relocation kit
- Intuitive, easy to use menu structure for programming and monitoring
- Interfaces perfectly with Pentair automation systems that give you the convenience of Mobile device control
- Totally enclosed fan cooled design for quiet operation and long life, top-mounted field wiring compartment makes access and installation easier
- 8-Programmable speed settings and built in timer
Description
The original 011018 Drive/software is no longer being produced or supported therefore the 011018 is being replaced by the 011028 energy Star certified: Meets strict energy efficiency criteria set by the U.S. Environmental Protection Agency & the U.S. Department of energy Energy saving to 90%* versus traditional pumps 8 programmable speed settings & built-in timer to ensure the pump runs at optimum speed & duration ultra-efficient permanent magnet motor design reduces noise & vibration for greater efficiency & longer pump life dramatically quieter operation – as low as 45 decibels – about 4 times quieter than most traditional-style pumps** totally enclosed fan-cooled (TEFC) design & low average operating speed makes intelligent the quietest pump on earth fully compatible with Pentair automation & Controls & other brands of digital pool/spa controls for managing pump, heating, lighting, spa jets & water features built in Diagnostics protect the pump for longer service life wef 6.1 the 3.95 *savings based on variable speed pump compared to a single-speed pump running 12 hoursper day at an average of $0.16per kwh in a 20, 000 gallon pool. Actual savings may vary based on local utility rates, pool size, pump run time, pump horsepower, pump rpm, plumbing size & length, pump model, Service factor & other hydraulic factors. ** compared to noise level of typical 1.5 HP single-speed pump.
2. SUMMER WAVES SALT WATER SYSTEM FOR ABOVE GROUND POOLS W/ TOUCH LED DISPLAY
Description
For above ground pools up to 7000 gallon capacity. Equipped with Touch Screen LED Display. Gentle for whole family. Requires a filter pump flow rate of 600 – 4000 Gal per hour.
3. Intex 28633EG Krystal Clear Cartridge Filter Pump for Above Ground Pools, 2500 GPH Pump Flow Rate, 110-120V with GFCI
Feature
- Easy to use – simply replace the old cartridge with a new one every two weeks
- Double insulated pump
- Air release valve for air trapped inside filter chamber
- Sediment flush falve at bottom of filter chamber
- Works with 18-feet Easy Set, 18-feet Metal Frame, or 18-feet by 10-feet Oval Frame pools
Description
Keep your pool water Krystal Clear and refreshing this summer with the Intex 2,500 GPH Filter Cartridge Pump! Boasting a pump flow rate of 2,500 gallons per hour and a system flow rate of 1,900 gallons per hour, this pump will circulate and filter the water in your above ground pool to keep everything clean, refreshing, and fun. In addition, the maintenance for this pump is a breeze: just the occasional cartridge rinse or swap to keep this pump running strong. It uses Type B filter cartridges (Item #29005E) which should be changed every couple of weeks. This 2,500 GPH filter pump is the most powerful cartridge filter pump made by Intex, and is a must have for any above ground pool up to 24 feet in diameter, see for yourself! It can be used with any Intex above ground pools and features a built-in timer to set operating times for the ultimate in convenience.
4. Intex Adapter B for Filter Pump & Saltwater Conversion Kit Single
Feature
- The Type B Hose Adapter converts INTEX pools with 1.25″ fittings to 1.5″ fittings
- These hose adapters will be needed when upgrading from a low flow pump system (1000 GPH or smaller) to a larger pump system (1500 GPH or larger)
- Includes one hose adapter
- Please note, if you are upgrading and not replacing just one, two adapters are needed for your system
Description
The Type B Hose Adapter converts INTEX pools with 1.25″ fittings to 1.5″ fittings. These hose adapters will be needed when upgrading from a low flow pump system (1000 GPH or smaller) to a larger pump system (1500 GPH or larger). Includes one hose adapter. Please note, if you are upgrading and not replacing just one, two adapters are needed for your system.
5. Intex 28635EG Krystal Clear Cartridge Filter Pump for Above Ground Pools, 1500 GPH Pump Flow Rate, 110-120V with GFCI
Feature
- Specially designed for above ground pools. For use with Intex Easy Set pool models 18’, Frame pool models 16’ or 18’, Oval Frame pool models 20’ X 12’.
- Easy installation – just attach hoses and plug in (Partial assembly required).
- System flow rate: 1,180 gph (2,839 lph). Pump flow rate: 1,500 gph (3,785 lph)
- Double insulated pump. Auto timer with preset 2 to 12 hour cycles.
- Air release valve for air trapper inside filter chamber. Sediment flush valve.
- Includes one easy to clean, replaceable filter cartridge. For best results, replace filter cartridge every 2 weeks. Replacement cartridge: Type A/C.
- Note: plunger valves and 1 ½” (38mm) inlet/outlet fittings not included.
Description
Keep your pool water Krystal Clear and refreshing this summer with the Intex 1,500 GPH Filter Cartridge Pump! Boasting a pump flow rate of 1,500 gallons per hour and a system flow rate of 1,180 gallons per hour, this pump will circulate and filter the water in your above ground pool to keep everything clean, refreshing, and fun. In addition, the maintenance for this pump is a breeze: just the occasional cartridge rinse or swap to keep this pump running strong. This filter uses Type A filter cartridges (Item #29000E) which should be changed every couple of weeks. This pump is a must have for any above ground pool up to 18 feet in diameter, see for yourself! Lastly, this pump features a built-in timer to set the operating time, making it incredibly simple and convenient to use. NOTE: If the pump will not start at all, check the GFCI outlet on the plug to ensure it has been properly reset for use and check that the GFCI is not being plugged into an extension cord. Refer to page 13 in manual (Other content) for troubleshooting steps.
6. Hayward W3SP2610X15 Super Pump Pool Pump, 1.5 HP
Feature
- The Hayward Super Pump Single-Speed 1.5 Pool Pump sets the industry standard for efficiency and dependability and is part of the world’s best-selling medium-head pump family
- Heavy-duty, high-performance motor and airflow ventilation provide quieter, cooler, more efficient operation
- Extra-large debris basket provides added leaf-holding capacity for less frequent maintenance
- Exclusive swing-away hand knobs make for easy strainer cover removal without tools
- Unique service-ease design offers quick 4-bolt access to all internal components for simple servicing
Description
Hayward’s medium-head Super Pump Single-Speed 1.5 HP Pool Pump sets the industry standard for excellence and value. Its heavy-duty, high-performance motor and airflow ventilation provide quieter, cooler, more efficient operation for virtually any in-ground pool or spa, while its exclusive service-ease design offers quick 4-bolt access to all internal components. With these and other advanced features—including an extra-large debris basket, exclusive swing-away hand knobs, a Noryl impeller and a see-through strainer cover—it’s easy to see why Super Pump is the best-selling medium-head pool pump in the world.
7. XtremepowerUS 75035-1 2 HP Self Prime in/Above Ground Swimming 2" NPT Fitting ETL Pool Pump, Black
8. Multiquip ST2037 Centrifugal Single Phase Electric Submersible Pump, 37-Feet Head, 73 GPM, 2-Inch Discharge
Description
The ST2037 incorporates a rugged cast aluminum housing, internal thermal overload protection, dual shaft seals, sealed ball bearings impeller and molded 25′ power cable with strain relief. This is a powerful versatile, low maintenance pump that is perfect for a wide range of operations supporting contractors, service utilities, Municipalities and homeowners. Built-in thermal overload protection that shuts down the pump when operating temperature becomes too high and automatically restarts once the motor cools and a proper temperature is met. The ST series single phase pumps are in accordance with ISO9001 quality management system standard. Also, all single phase models carry the UL listing for compliance with both US or Canadian electrical safety codes. The ST series single phase pumps are in accordance with ISO9001 quality management system standard. Also, all single phase models carry the UL listing for compliance with both US or Canadian electrical safety codes.
9. SHURflo Industrial Pump – 198 GPH, 115 Volt, 1/2in, Model# 2088-594-154
Feature
- N/A
- Imported
- self-priming up to 9 vertical lift feet
- used in delivery and transfer of liquid applications up to 3 GPM (11.4LPM)
- 1/2″ MPT, 115VAC 60Hz, non-corded 3 wires, built-in check valve prevents back flow of fluid
- built-in pressure switch, turn on/off at 45psi, adjustable pressure setting
- Santoprene valves and diaphragm
Description
Shurflo’s 115 volt, 3.3 gallons per minute pump @ 45 psi
10. Tsurumi HS2.4S; semi-Vortex Submersible Trash Pump w/Agitator, 1/2hp, 115V, 2" Discharge
Conclusion
By our suggestions above, we hope that you can found 2 Hp Intex Salt Water Pool Pumps for you.Please don’t forget to share your experience by comment in this post. Thank you!