Top 10 1 2 Brass Ball Valve

This is a lead free Everflow Supplies full port ball valve, from the economy line, constructed from forged brass with a chrome plated brass ball. In particular, it has 1-1/2 inch female threaded connections for use with ips pipes. Furthermore, the valve is upc approved and complies with nsf 61-g, with a maximum pressure of 150 psi for saturated Steam and 600 psi wog. In addition, the valve is operated with a chrome plated brass handle with a vinyl grip.

1″ Fpt x 3/4″ Mpt 3-way brass ball valve 600 PSI cwp.

This is a lead free Everflow Supplies full port ball valve, from the economy line, constructed from forged brass with a chrome plated brass ball. In particular, it has 1 inch female threaded connections for use with ips pipes. Furthermore, the valve is upc approved and complies with nsf 61-g, with a maximum pressure of 150 psi for saturated Steam and 600 psi wog. In addition, the valve is operated with a chrome plated brass handle with a vinyl grip.

Technical Parameter:
◎Model: T25-B2-B;
◎Working Voltage: 9-24VAC/DC;
◎Valve Dimension:1″ NPT Female Thread Connection, 23mm(0.075Ft) Reduce Bore;
◎Wiring Diagram:CR5-02(2 Wires Control, Installed With Position Feedback Wires);
◎Valve Body Material: Brass;
◎Actuator Material: Engineering Plastics;
◎Open/Closed Time: About 3-5Sec.;
◎Suitable Media: Air, Water, Oil;
◎Power: Max 2 Watts;
◎Manual Override: Yes;
◎Indicator: Yes;
◎Working Current: Max 500Ma When Action, Cut Off Current When Arrived At Place;
◎Max. Torque Force For Aucator: 2 N.M;
◎Cables Length: 0.5 Meters;
◎Max Working Pressure:145PSI(1.0MPA);
◎Liquid Temperature: 32°~212°F (0°~100°C);
◎Environment Temperature:5~122F(-15°~50°C);

Application:
◎HVAC;
◎Water Treatment;
◎Chemical Process;
◎Small Industrial Equipment For Automatic Control;
◎Replacing Solenoid Valve, Particularly When Solenoid Cannot Work Reliably;
◎Automatic Control Systems;
◎Efficient Water-Saving, Water Equipment;
◎Solar Hot Water Project;
◎Regular Watering The Flowers, Timing Humidifying, Timing of Drainage of Air Compressor.

Features:
◎Smart Shape, Perform Reliably, Large Output Torque, As Long As 50000-100000 Times , Convenience For All Kinds Of Requirements;
◎Float Ball design, No Leak, Large Flow, The Valve is Bi-directional Ball Valve , Regardless of Inlet And Outlet , Most Suitable for Heavy Dirt and Long Time No Action;
◎The Conditions That Solenoid Valve Can Not Be Worked;
◎High Protection Class, Can Be Worked In Most Conditions;
◎POM Cooperate With Metal Gear, The POM Gear is Used in High-Speed Level to Reduce Noise, At The Same Time Metal Gear is Applied At The Low-Grade To Ensure The Reliability of The Gear;
◎Electrical and Mechanical Limit Integrated Design, Accurate Localization ,High consistency , Put an End to Swing of Valve.

This 1” brass motorized ball valve from U.S. Solid comes in a sturdy, durable brass. It is a great option for the DIY project, but strong enough for big businesses. The stem and body of the valve are comprised of trusty brass, which is safe but resilient. This is key, since many people use these valves in their home water systems.
The valve actuates with 9-24V of AC/DC power. When energized, it will open fully in 3-5 seconds. Since this valve is a normally closed (N/C) ball valve, it will automatically return to a closed position when the power source is eliminated. When fully opened, a limit switch keeps the amount of power used by the valve to a miniscule levels. This makes it a much more environmentally friendly option than most solenoid valves. Most solenoid valves are fully energized when opened, which can lead to problems and overheating when run continuously. This valve draws such low levels of power once fully opened that it can be run continuously and never overheat.
The stem on this valve comes with a robust torque rating of 2 N m. This is important, though often overlooked. The stem is a frequent point of failure for valves, and having a strong stem helps to ensure a lifetime of quality performance.
There are many different potential uses for this motorized ball valve. While not quick acting, it is sturdy and resilient once energized.
Specifications
Valve Material: Brass
Ball Seat: PTFE
Seal: EPDM
Close/Open Time: 3-5 Seconds
Working Voltage: 9-24V AC DC
Max Power: 2W
Max Torque: 2 N m
Max Pressure: 1.0Mpa
Temperature range for Flow Medium: 0°C to 90°C
Ambient Temperature Range: -10°C to 40°C
Enclosure Rating: IP65
Life Expectancy: 80,000-100,000 Cycles
Bore Type: Standard
Thread Type: NPT
WarningLead content ~ 3.05%. It cannot be applied to drinking water.

This SuperWhole WJ2300V Series ball valve is made of Stainless Steel 316 for higher corrosion resistance than Brass/copper and has a plastic-covered lever handle for on/off manual control. It has PTFE (polytetrafluoroethylene) seats and seals for resistance to chemicals, moisture, and high temperatures. This inline valve has a Standard port flow and 1/4" female National Pipe Taper (NPT) threads for connecting two male threaded pipe fittings going in the same direction. It is pressure rated to over 600 pounds per square inch (psi) for cold working pressure (CWP), Over 150 psi for saturated steam. This mini ball valve is suitable for use in water, oil£¬chemicals£¬petroleum and gas applications.

Ball valves use a spherical disc to control the flow between pipes, tubes, or hoses. Flow is allowed when the hole that pierces the ball-shaped disc is in line with the inlet and outlet of the valve and is blocked when the ball is horizontally swiveled 90 degrees, so that the hole of the ball is perpendicular to the opening of the valve.Ball valves can be referred to as full port or reduced port (also known as regular or standard port) depending on the inner diameter or the valve. A ball valve is full port if the hole of the ball is the same size as the inner diameter of the connecting pipeline (resulting in lower friction) and termed reduced port if the hole of the valve is one pipe size smaller than the pipe, resulting in less flow through the valve than through the shaft of the pipe.Ball valves may have a handle or lever that aligns with the ball¡¯s position (open or closed) for manual operation. They are primarily used in air, gas, liquid,chemicals£¬petroleum and steam applications.

SuperWhole International distributes professional pipe, fittings, and valves . Meets International Organization for Standardization (ISO) standard 9002.

Package Included:
1 piece x 2" ball valve